Is this good airsoft gun?
I want it.
www.proairsoft.com/acatalog/info_AM_1MK22.html
I speak english.
I want it.
www.proairsoft.com/acatalog/info_AM_1MK22.html
I speak english.
Is this good?
Gazaaa
21479
0Äänestä
Muut lukivat myös
Odottaa vastausta
Näihin keskusteluihin ei ole vielä vastattu. Ole ensimmäinen.
Vastaukset 21
Vanhimmat
the only problem that I see with that gun is that it shoots way too hot. The gun has M130 upgrades and most airsoft fields and all skenarious here in Finland have a 1.6 joule limit. If you are lucky the gun has bad airsealing and shoots under the limit but if it shoots over then just remove full auto from the gun and your okay.
Also remember use good quality bio bb's
yes is really goodi think :/
Thank you .......!
"I speak english"..... No shit!:D
Oh, sorry. But I think you can think this is troll.
There is no question about that you are a troll
juu aar faking kei
Not sure if trolling, or just very stopid.
Why would someone link a gun that´s been out of stock like since 2008/2009. Besides, that gun , despite of its good looking parts, is a piece of junk. Rifle´s outer body is almost completely plastic and squeaks, when twisted. Internals are ok, but the combination of those parts just makes the gun to destroy itself.
I know two airsofters, who bought this gun and both of them broke off. First by dropping it (body cracked like, say, cheap plastic) and the other one´s gearbox cracked from the front.
Get an AK, if you want a gun that lasts forever.
I´m not feeding the troll, i´m just educating people in english.
Well version 2 gearbox won't hold up without sandin. At these this the most important things to do if you upgrading it. umm.. plastic is okay if you playing summer times but during winter will most likelly crack just by touching it.
I am aware of that, but the description says, that the gearbox is already reinforced. So the manifacturer has to have done something wrong, if reinfoced GB breaks like a non-upgrade one.
I approve plastic, if its nylon-fiber or good quality ABS-plastic, but the gun´s body is made out of cheap plastic usually seen in, well, cheap plastic things. In some cases, I have discovered good quality ABS better than cheap pot metal, especially in winter. If you slam Marui ABS AK-47 and Cyma pot metal AK into tree in temperature of -15 degrees, the Cyma is more likely to crack than the Marui, because of flexibility of the plastic. Metal is harder material, but ABS is more flexible and thanks to this feature it can withstand harder hits than pot metal. Metal, however, is still more realistic material and looks better than plastic and it doesn´t bend so easily and that´s why it can take more hits without breaking. Metal doesn´t bend, it cracks. That´s why i love steel and AK-series.
Steel can take a lot more hits an still not to break, unlike pot metal. Airsoft AK:s with steel parts are usually constructed from cast steel and steel sheet bent into its shape. Sheet steel is lovely material, because it´s strong, it doesn´t crack and if it bends, it is very easy to fix with hammer and vice/anvil (or propably not with anvil :)). Steel is also material that is possible to weld together, unlike pot metal. Even if it has some inpurities in it, it is still hundreds of times better material than pot metal, that is impossible to fix (with usual garage stuff)
So IMO its either steel of good quality plastic.
Okay, i hate cheap plastic! I want good airsoft gun for Finland. Can you provide a link?
I from London, but I live now in Finland.
Do you all ready have airsfot guns back in home UK? If you do, why not ship them or one or too?
What is you budget for this M4/M16 style AEG?
My budget is about 210euros.
http://www.taiwangun.com/electric_air_soft_guns.html
look here. Very cheap polish site and ships to Finland. I have ordered many times from there and no problems.,
Umm, why should one order from taiwangun, if there´s stores already in Finland.
Furthermore, you´ll also get 6-month warranty for gun you´ve bought from Finland, as opposed to buying from foreign country. It is also more reliable than buying from some vague chinese retailer.
If I had to recommend only one airsoft store in Finland, it would be Milgear:
http://www.milgear.fi/kauppa/
The site is very easy to use, clear and it has a huge number of products. Of course there is many other sites/stores in Finland, for example Proairsoft, Muovisotilas etc.
For 210 euros, you could get this:
http://www.milgear.fi/kauppa/g36c-cyma-cm0003-m120-p-3550.html
It is like a compromise between AK and M4-series and has good sides from both: it is tactical like a M4, but still has the strenght and power of an AK. The body is made out of nylon-fiber improved plastic and is easy to disassemble. It has the superior Ver.3 gearbox with 7mm steel bushings, steel spring guide with bearings and M120 spring. So it shares the same gearbox with same internals as Cyma AK-series, which have superb internals. The motor is also very high torque in my AK, but i cannot confirm that with the G36C, because some parts MAY vary sometimes.
If I had to buy some other gun than an AK (which i am not doing :)), I´d definitely buy this gun. Even if it may be plastic, it still is sturdy, powerful and tactical. I once had G36E and that was probably the second best gun type I´ve owned. I sold it because I didn´t like the lenght of it and the integrated sight sucked arsenal. But the G36E with rail w/iron sight is much better, I´ve fired that model once.
So if you are going to buy only one good gun, buy this.
Thank you, thank you.
But I dont like G36C.
I think this is not a beautyful, this gun is so ugly. I like AK's and M4's.
I can also recommend Milgear. Milgear also offers group order service to WGC, RedWolf airsoft, RSOV, Soldier of Furtune and Moore Militaria.
Milgear will make the order and they also give you a warranty. If you have problem with the product Milgear will handle all.
Here link to grouporder page, there is also a calendar where you can see in comming deadlines for next and following groupeorders.
www.milgear.fi/kauppa/ryhmatilaus.php
Please, try to use google translate..
You have more options if you order from HongKong.
why taiwangun? Because its a lot cheaper and reliable too. They also give you 6-12 month warranty. Shipping costs are also cheap, dependin of the weight. About 12-16€. They also ship fast. It tooks only about week. Milgear is bretty good too, but double prices compared to taiwangun. I have ordered one gun from milgear and there was taiwanguns logo under milgears logo in the box........,,
yes , taiwangun is good. I have ordered every kind of stuff from there. Its polish shop, not chinese. Its bretty cheap. If some cyma ak cost 150-170€ in milgear, it would cost 90-120 in taiwangun. There is lots of different AK and M4 models in taiwangun.
All the accessories are also cheap. And shipping really tooks about week from there.,
So what uou are saying is that Polish stores are bertter than Chinese? Why? They still sell same staff.
Whoops, my bad. I accidentally transposed Taiwangun to another shop (in China). If ordered from CHINA, you wont get warranty. Taiwangun is another thing.
I dont see a reason why not to order from Taiwangun.
And yes, Milgear has lots of stuff bought from taiwangun, at least on Kalash AK-boxes. That´s the reason why Milgear´s stuff is "a little" more expensive.
And what comes to Kalash, anyway... I can recommend buying one, if you find a model that pleases you, buy it. I have owned 3 Kalash AK:s and none of them had any problems. They are cheap, they have a stamp steel body and few not-so-important parts made out of pot metal. They also have that "rough AK look" as standard: rough painting, few flaws and small play on some parts (sometimes), but the best thing is, that it works like a clockwork in any weather. The structure´s so simple, that you can get the gearbox out in about 1-2 minutes if using the right tools (screwdriver and pliers).
So if you´re intrested in Ak-series, check this out:
http://www.taiwangun.com/electric-air-soft-guns/cm-048m-cm_1.html
AKM, the modernized version of AK-47 with few modifications. That particular model has excellent prize/quality ratio: it has steel body and laminated wood parts and only a few pot metal parts (rear sight post, gas block and front sight post). Internals are excellent for the gun of that price range.
If the pot metal parts still bug you, check this out:
http://www.taiwangun.com/electric-air-soft-guns/rk-10s-boyi_1.html
I own this gun and all I can say is that the guin is pure badassnes: Outer parts are completely made out of steel excluding the laminated wood grips. This gun is as close to the real AKMS than an airsoft AEG just can be.
So what do you think about those?