dc++ aktiiviksi?

First you need to set up the router to forward the connections to the computer with DC . This is could be called Port mapping, port redirecting, port forwarding or something like that. Find out how to do this with your router/NAT in the user manual.

You need to forward one port (select a number between 1024 - 65535, they should mostly all be free. The default port is 1412, but it is wise to select a unique one) and make sure both UDP and TCP is forwarded.

# The IP that you are forwarding to should be the internal IP address of your DC computer. It usually begins with "192.168", "172.16." or "10.x.". Go to the command prompt and type: ipconfig
# When you have mapped a port, you need to open up DC and go to the settings. Where you select active mode, in the port field, enter the port number that you are forwarding on the router.
# In the IP field, you need to enter the external IP address of your router. This can easily be checked on here.
# It should now be working. If it is working for a while, but the next time you use DC , you only get "Connection Timeout’s or no results when searching, your IP (either external or internal) is likely to have changed. If you find the external IP is constantly changing, you can set yourself up with a dynamic name. Such as Dynip or DynDns and put that name into the IP field. Make sure to use a program that updates the dynamic name service with your latest IP.



toivottavasti ei tullut liikaa englantia...

ps. oli ihan suoraan dc ohjeista jotka sinunkin kannattaisi mielummiin lukea.