Hei, osaisiko joku neuvoa miten saisin formatoitua Kannykan SD kortin, poika kaytti luuria ennen ja silla oli omat salasanat ja sit vaihtoi luuria ja ei tarvinnut korttia enaa, nyt olisi itella kayttoa korteille mutta mikaan kikka ei toimi kun kyseessa 2017 vuoden luurissa kaytetty kortti, olen jo kokeillut alla alevia tapoja avata lukitus, ilman apuja.
1. Start > Run > cmd
2. type "diskpart" -> runs diskpart.exe from system folder
3. type "list volume" -> now you see all your connected drives, see which one is the drive
4. type "select volume #" -> # being the letter of your drive
5. type "attributes disk clear readonly" -> removing the protection
6. Then open your SD, you can now edit, delete, move files.
tai
1. Plunge this drive or memory card to a computer. (Of course, you should use a card Reader to connect your memory card.)
2. Click “Start” on the taskbar to open “Run” and type in “regedit”.
3. Hit “HKEY_LOCAL_MACHINE” to expand “System”.
4. Find “Current Control Set” in “System” list to click “Control”.
5. Check whether there is a key named “Storage Device Policies” to change the digit in the “DWORD value” box into "0" and press “OK”.
But, if you cannot find the key named “Storage Device Policies”, you are supposed to create a one: right click “Control” to create a new key and name it as “Storage Device Policies”=> right click this new key to open “DWORD Value” and name it as “write protect”=> Double click it to change number.
kumpikaan naista ei salli kortin formatointia. disk part nayttaa kortin olevan RAW muodossa.
Mita muuta voisin kokeilla?
1. Start > Run > cmd
2. type "diskpart" -> runs diskpart.exe from system folder
3. type "list volume" -> now you see all your connected drives, see which one is the drive
4. type "select volume #" -> # being the letter of your drive
5. type "attributes disk clear readonly" -> removing the protection
6. Then open your SD, you can now edit, delete, move files.
tai
1. Plunge this drive or memory card to a computer. (Of course, you should use a card Reader to connect your memory card.)
2. Click “Start” on the taskbar to open “Run” and type in “regedit”.
3. Hit “HKEY_LOCAL_MACHINE” to expand “System”.
4. Find “Current Control Set” in “System” list to click “Control”.
5. Check whether there is a key named “Storage Device Policies” to change the digit in the “DWORD value” box into "0" and press “OK”.
But, if you cannot find the key named “Storage Device Policies”, you are supposed to create a one: right click “Control” to create a new key and name it as “Storage Device Policies”=> right click this new key to open “DWORD Value” and name it as “write protect”=> Double click it to change number.
kumpikaan naista ei salli kortin formatointia. disk part nayttaa kortin olevan RAW muodossa.
Mita muuta voisin kokeilla?
Vastaukset 1
Vanhimmat
Kokeile kortinvalmistajan omalla ohjelmalla tyhjentää se.