Kompressorin hankinta

Kuinka tehokkaan kompuran uskaltaa 3x16A sulakkeille hankkia? Liekö 4kW lähellä maksimia niin ettei sulakkeet kärvähdä startatessa? Käyttöä olis lähinnä maalaukseen, plasmaleikkaukseen ja satunnaiseen renkaanvaihteluun.

http://www.aflatek.eu/piston-air-compressors/1504-aflatek-airpro100v-air-compressor.html
Mielipiteitä tästä Latvialaisesta 100 litran 12.5bar 4kW koneesta? Ei ainakaan hinnan kiroissa olisi :rolleyes: Tuo ilmoitettu 310l/min ilmantuotto ihmetytti kun saman valmistajan 2.2kW kompuralla tuo oli 330l/min, heitin viestiä ja sain vastaukseksi tämän. Eli ilmeisesti ilmantuottoa olis 300 litraa minuutissa 12.5 barin vastapaineella.

"the values on our website are correct. It might be closer to 360-400l/min for the Air100V but we have dispalyed lower rates than the factory ones because tests are usually done at perfect conditions and these values can seem infalted compared to the real values. All of the values are at max. pressure so 330l/min at 8bar for Air100V and 300l/min at 12,5bar for the AirPro100V. Our ''Pro'' models have lower air delivery rate than the regular once because they are working at much higher pressure. To be honest these values do not seem low at all considering they are at the maximum pressure. As you can see Air100V has 2,2kW and AirPro100V has 4,0kW motor power. Checking other manufacturers, i can say that mos likely higher numbers than about 350l/min are either not at 8bar or are just inflated.
If you have any other questions, feel free to ask any time.
Also from Saturday till Tuesday included we have holidays here in Latvia so i won't be able to answer you in the nearest days."