d-link id-624+ ja päivtykset

WARNING: DO NOT upgrade the firmware with a wireless connection. You will damage the router. Also, your current settings may be lost after upgrading.

Step 1 Download the firmware at (esim. http://www.dlink.fi) and save the file to your computer. Do NOT run or try to open the .bin or .tfp file. It will not work. You will load the file through the router interface.

Step 2 Open your browser, enter the IP address of your router (192.168.0.1) and click OK.

Step 3 Enter your username (admin) and leave the password field blank, which is the default password. Click OK to enter the web configuration for the device.

Step 4 Click on the Tools tab and then the Firmware button on the left side. Click on the Browse button and browse to the .bin file you downloaded in Step 1. Highlight the file by clicking on it once and click Open. Click Apply. It will take a few seconds for the upgrade to complete. Click on the Continue button.

Step 5 After the router reboots, close your web browser and reopen it. Enter 192.168.0.1 to reconnect with the web configuration. Enter username admin and again leave the password blank. Click OK. The firmware upgrade is now complete.

Step 6 If you have problems with the web configuration at this point, unplug the power to the router, wait 10 seconds, and plug back in. Repeat step 5. If this did not help, perform a hard reset on the router. To perform a hard reset, use a paperclip and hold down the reset button on the back of the unit for 10 seconds while the device is powered on. Release it and the router will reboot, the lights will blink, and then stabilize. Repeat Step 5.