DVD-soitin?

sähel..

Mulla on keskusyksikössä cd-soitin ja DVD-soitin, eli polttava soitin, CD-soitin pelaa hyvin, mutta DVD-soitin ei inahdakkaan, vaikka laitat levyn sisään, ei tapahdu kuin pari valon vilkahdusta soittimessa, elokuvia en pysty katselemaan ja kun laitan CD-soittimeen samaisen elokuvan, tulee herja:Internal GSteamer error:Pad problem, file a bug
Jakelu on Ubuntu 5,10 beeze ja totem näkyis olevan elokuvasoitin, mutta mitä oikein puuttuu?
Pitääkö audiopiuha olla kiinni koneessa ja kummassa soittimessa CD vai DVD, onko se välttämätöntä, kun se ei ole ennenkään ollut kiinni, kun oli wintukka?
En tiedä tulinko ymmärretyksi, mutta laittakaa kysymyksiä, niin koitan selvittää mitä ohjelmia on, no yksi jonka latasin on ogle, mutta ei auttanut.

6

458

Äänestä

    Vastaukset

    Anonyymi (Kirjaudu / Rekisteröidy)
    5000
    • asetukset?

      onko sulla nuo molemmat soittimet samassa ide-kaapelissa? eli toinen master ja toinen slave?
      jos on, niin onko biosista noille asemille määritetty lba-moodi vaiko jotain muuta?
      mulla nimittäin oli samantapainen ongelma kun rakensin uuden koneen, niin piti olla biosissa se lba päällä.

      >Pitääkö audiopiuha olla kiinni koneessa ja kummassa soittimessa CD vai DVD,

      sitä audiopiuhaa tarvitaan vain silloin, jos toistat audio-cd levyjä. muuten siitä ei ole hyötyä.

      • sähel..

        Toinen on master ja toinen slave, mutta tosta biossista en tiedä, en ole katsonut, mutta wintukassa toimivat molemmat samoilla asetuksilla kuin nytkin, koska en ole muuttanut asetuksia milläänlailla fyysisesti.

    • soittimissa

      Pitää olla oikeat pluginit/codecit asennettuna, esim. mplayer tarvitaan usein, ehkä kannattaa etsiä omasta jakelusta tarvittavat palikat, kuten libdvdcss2, win32 codecit jne. Mandriva/kaffeine yhdistelmässä soi kaikki (cd,vcd,avi,wmv,divx,xvid,itunes,mpg, jne) pienillä säädöillä, tuo Ubuntu/totem on minulle täysin vieras.

    • digitaalinen suorasoitto

      "Pitääkö audiopiuha olla kiinni koneessa ja kummassa soittimessa CD vai DVD, onko se välttämätöntä, kun se ei ole ennenkään ollut kiinni, kun oli wintukka?"

      Joo ei tarvitse audiopiuhaa, pitää vain soittaa audiolevyt ohjelmalla joka tukee digitaalista suorasoittoa, esimerkiksi KsCD tai vastaava.

      Katsoppas mitä konsolissa kirjoitettu dmesg komento kertoo, tunnistaako kernel edes sitä asemaa. Copy/pasteat sen dmesg tulosteen vaikka tänne tai ubuntu foorumille.

      • sähl..

        c3fbff 00000000 00000000 00000000 00000000 00000000
        [4294667.387000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
        [4294667.387000] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
        [4294667.387000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
        [4294667.387000] CPU: L2 Cache: 256K (64 bytes/line)
        [4294667.387000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
        [4294667.387000] Intel machine check architecture supported.
        [4294667.387000] Intel machine check reporting enabled on CPU#0.
        [4294667.387000] CPU: AMD Athlon(tm) XP 2200 stepping 01
        [4294667.387000] Enabling fast FPU save and restore... done.
        [4294667.387000] Enabling unmasked SIMD FPU exception support... done.
        [4294667.387000] Checking 'hlt' instruction... OK.
        [4294667.391000] checking if image is initramfs... it is
        [4294667.915000] Freeing initrd memory: 5513k freed
        [4294667.917000] ACPI: Looking for DSDT in initrd... not found!
        [4294667.981000] not found!
        [4294667.988000] ENABLING IO-APIC IRQs
        [4294667.988000] ..TIMER: vector=0x31 pin1=2 pin2=-1
        [4294668.099000] NET: Registered protocol family 16
        [4294668.099000] ACPI: bus type pci registered
        [4294668.100000] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
        [4294668.100000] PCI: Using configuration type 1
        [4294668.100000] mtrr: v2.0 (20020519)
        [4294668.100000] ACPI: Subsystem revision 20050729
        [4294668.108000] ACPI: Interpreter enabled
        [4294668.108000] ACPI: Using IOAPIC for interrupt routing
        [4294668.108000] ACPI: PCI Root Bridge [PCI0] (0000:00)
        [4294668.108000] PCI: Probing PCI hardware (bus 00)
        [4294668.108000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
        [4294668.112000] Boot video device is 0000:01:00.0
        [4294668.133000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
        [4294668.136000] ACPI: Power Resource [URP1] (off)
        [4294668.136000] ACPI: Power Resource [URP2] (off)
        [4294668.136000] ACPI: Power Resource [FDDP] (off)
        [4294668.136000] ACPI: Power Resource [LPTP] (off)
        [4294668.138000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 *12 14 15)
        [4294668.139000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
        [4294668.139000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
        [4294668.139000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
        [4294668.139000] Linux Plug and Play Support v0.97 (c) Adam Belay
        [4294668.139000] pnp: PnP ACPI init
        [4294668.144000] pnp: PnP ACPI: found 12 devices
        [4294668.144000] PnPBIOS: Disabled by ACPI PNP
        [4294668.144000] PCI: Using ACPI for IRQ routing
        [4294668.144000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
        [4294668.154000] audit: initializing netlink socket (disabled)
        [4294668.154000] audit: initialized
        [4294668.154000] VFS: Disk quotas dquot_6.5.1
        [4294668.154000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
        [4294668.154000] devfs: 2004-01-31 Richard Gooch ([email protected])
        [4294668.154000] devfs: boot_options: 0x0
        [4294668.154000] Initializing Cryptographic API
        [4294668.154000] isapnp: Scanning for PnP cards...
        [4294668.507000] isapnp: No Plug & Play device found
        [4294668.524000] PNP: PS/2 controller doesn't have AUX irq; using default 0xc
        [4294668.524000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
        [4294668.524000] serio: i8042 AUX port at 0x60,0x64 irq 12
        [4294668.524000] serio: i8042 KBD port at 0x60,0x64 irq 1
        [4294668.524000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
        [4294668.524000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
        [4294668.524000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
        [4294668.526000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
        [4294668.526000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
        [4294668.526000] io scheduler noop registered
        [4294668.526000] io scheduler anticipatory registered
        [4294668.526000] io scheduler deadline registered
        [4294668.526000] io scheduler cfq registered
        [4294668.527000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
        [4294668.527000] NET: Registered protocol family 2
        [4294668.537000] IP: routing cache hash table of 4096 buckets, 32Kbytes
        [4294668.537000] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
        [4294668.537000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
        [4294668.538000] TCP: Hash tables configured (established 32768 bind 32768)
        [4294668.538000] NET: Registered protocol family 8
        [4294668.538000] NET: Registered protocol family 20
        [4294668.538000] ACPI wakeup devices:
        [4294668.538000] PCI0 UAR1 USB4 USB5 PS2K USB USB1 AC9 MC9
        [4294668.538000] ACPI: (supports S0 S1 S4 S5)
        [4294668.538000] Freeing unused kernel memory: 168k freed
        [4294668.554000] vga16fb: initializing
        [4294668.554000] vga16fb: mapped to 0xc00a0000
        [4294668.618000] Console: switching to colour frame buffer device 80x30
        [4294668.618000] fb0: VGA16 VGA frame buffer device
        [4294668.645000] input: AT Translated Set 2 keyboard on isa0060/serio0
        [4294669.757000] Capability LSM initialized
        [4294669.769000] NET: Registered protocol family 1
        [4294669.783000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
        [4294669.783000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
        [4294669.783000] ACPI: bus type ide registered
        [4294669.789000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
        [4294669.789000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
        [4294669.789000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
        [4294669.789000] VP_IDE: chipset revision 6
        [4294669.789000] VP_IDE: not 100% native mode: will probe irqs later
        [4294669.789000] VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
        [4294669.790000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
        [4294669.790000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
        [4294669.790000] Probing IDE interface ide0...
        [4294670.173000] hda: HDS728080PLAT20, ATA DISK drive
        [4294670.785000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
        [4294670.785000] Probing IDE interface ide1...
        [4294671.577000] hdc: SONY CDU4811, ATAPI CD/DVD-ROM drive
        [4294672.291000] hdd: LITE-ON COMBO SOHC-5232K, ATAPI CD/DVD-ROM drive
        [4294672.342000] ide1 at 0x170-0x177,0x376 on irq 15
        [4294672.342000] Probing IDE interface ide2...
        [4294672.855000] Probing IDE interface ide3...
        [4294673.367000] Probing IDE interface ide4...
        [4294673.879000] Probing IDE interface ide5...
        [4294674.394000] hda: max request size: 1024KiB
        [4294674.402000] hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(133)
        [4294674.403000] hda: cache flushes supported
        [4294674.403000] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
        [4294674.431000] hdc: ATAPI 48X CD-ROM drive, 120kB Cache
        [4294674.431000] Uniform CD-ROM driver Revision: 3.20
        [4294674.433000] hdd: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache
        [4294674.783000] Attempting manual resume
        [4294674.785000] swsusp: Suspend partition has wrong signature?
        [4294674.826000] PDC20276: IDE controller at PCI slot 0000:00:0f.0
        [4294674.826000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 19 (level, low) -> IRQ 19
        [4294674.826000] PDC20276: chipset revision 1
        [4294674.826000] PDC20276: 100% native mode on irq 19
        [4294674.826000] ide2: BM-DMA at 0xd800-0xd807, BIOS settings: hde:pio, hdf:pio
        [4294674.826000] ide3: BM-DMA at 0xd808-0xd80f, BIOS settings: hdg:pio, hdh:pio
        [4294674.826000] Probing IDE interface ide2...
        [4294675.345000] Probing IDE interface ide3...
        [4294675.890000] usbcore: registered new driver usbfs
        [4294675.890000] usbcore: registered new driver hub
        [4294675.891000] USB Universal Host Controller Interface driver v2.2
        [4294675.891000] ACPI: PCI Interrupt 0000:00:11.2[D] -> GSI 21 (level, low) -> IRQ 21
        [4294675.891000] PCI: Via IRQ fixup for 0000:00:11.2, from 10 to 5
        [4294675.891000] uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
        [4294675.953000] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
        [4294675.953000] uhci_hcd 0000:00:11.2: irq 21, io base 0x0000cc00
        [4294675.953000] hub 1-0:1.0: USB hub found
        [4294675.953000] hub 1-0:1.0: 2 ports detected
        [4294675.956000] ACPI: PCI Interrupt 0000:00:11.3[D] -> GSI 21 (level, low) -> IRQ 21
        [4294675.956000] PCI: Via IRQ fixup for 0000:00:11.3, from 10 to 5
        [4294675.956000] uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
        [4294676.018000] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
        [4294676.018000] uhci_hcd 0000:00:11.3: irq 21, io base 0x0000c800
        [4294676.018000] hub 2-0:1.0: USB hub found
        [4294676.018000] hub 2-0:1.0: 2 ports detected
        [4294676.021000] ACPI: PCI Interrupt 0000:00:14.0[A] -> GSI 16 (level, low) -> IRQ 16
        [4294676.021000] PCI: Via IRQ fixup for 0000:00:14.0, from 12 to 0
        [4294676.021000] uhci_hcd 0000:00:14.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
        [4294676.083000] uhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
        [4294676.083000] uhci_hcd 0000:00:14.0: irq 16, io base 0x0000c000
        [4294676.083000] hub 3-0:1.0: USB hub found
        [4294676.083000] hub 3-0:1.0: 2 ports detected
        [4294676.086000] ACPI: PCI Interrupt 0000:00:14.1[B] -> GSI 17 (level, low) -> IRQ 17
        [4294676.086000] PCI: Via IRQ fixup for 0000:00:14.1, from 12 to 1
        [4294676.086000] uhci_hcd 0000:00:14.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
        [4294676.122000] usb 1-1: new low speed USB device using uhci_hcd and address 2
        [4294676.148000] uhci_hcd 0000:00:14.1: new USB bus registered, assigned bus number 4
        [4294676.148000] uhci_hcd 0000:00:14.1: irq 17, io base 0x0000bc00
        [4294676.148000] hub 4-0:1.0: USB hub found
        [4294676.148000] hub 4-0:1.0: 2 ports detected
        [4294676.169000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
        [4294676.169000] 8139cp: pci dev 0000:00:13.0 (id 10ec:8139 rev 10) is not an 8139C compatible chip
        [4294676.169000] 8139cp: Try the "8139too" driver instead.
        [4294676.171000] 8139too Fast Ethernet driver 0.9.27
        [4294676.171000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18
        [4294676.171000] eth0: RealTek RTL8139 at 0xc400, 00:20:ed:2e:24:af, IRQ 18
        [4294676.171000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
        [4294676.197000] ACPI: PCI Interrupt 0000:00:14.2[C] -> GSI 18 (level, low) -> IRQ 18
        [4294676.197000] PCI: Via IRQ fixup for 0000:00:14.2, from 12 to 2
        [4294676.197000] ehci_hcd 0000:00:14.2: VIA Technologies, Inc. USB 2.0
        [4294676.197000] ehci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 5
        [4294676.197000] ehci_hcd 0000:00:14.2: irq 18, io mem 0xdfff7e00
        [4294676.198000] ehci_hcd 0000:00:14.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004
        [4294676.198000] hub 5-0:1.0: USB hub found
        [4294676.198000] hub 5-0:1.0: 4 ports detected
        [4294678.252000] usbcore: registered new driver hiddev
        [4294678.270000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:11.2-1
        [4294678.270000] usbcore: registered new driver usbhid
        [4294678.270000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
        [4294678.763000] ACPI: CPU0 (power states: C1[C1])
        [4294678.763000] ACPI: Processor [CPU1] (supports 16 throttling states)
        [4294678.942000] Attempting manual resume
        [4294678.942000] swsusp: Suspend partition has wrong signature?
        [4294678.954000] kjournald starting. Commit interval 5 seconds
        [4294678.954000] EXT3-fs: mounted filesystem with ordered data mode.
        [4294679.984000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
        [4294683.414000] Adding 1510068k swap on /dev/hda5. Priority:-1 extents:1
        [4294683.677000] EXT3 FS on hda1, internal journal
        [4294688.542000] parport: PnPBIOS parport detected.
        [4294688.543000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
        [4294688.629000] lp0: using parport0 (interrupt-driven).
        [4294688.671000] mice: PS/2 mouse device common for all mice
        [4294691.455000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected]
        [4294696.696000] cdrom: open failed.
        [4294696.700000] cdrom: open failed.
        [4294698.821000] Linux agpgart interface v0.101 (c) Dave Jones
        [4294698.832000] agpgart: Detected VIA KT266/KY266x/KT333 chipset
        [4294698.861000] agpgart: AGP aperture is 128M @ 0xe0000000
        [4294698.965000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
        [4294698.981000] shpchp: shpc_init : shpc_cap_offset == 0
        [4294698.981000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
        [4294699.224000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
        [4294700.107000] gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xd000, speed 1217kHz
        [4294700.298000] irda_init()
        [4294700.298000] NET: Registered protocol family 23
        [4294702.188000] Floppy drive(s): fd0 is 1.44M
        [4294702.203000] FDC 0 is a post-1991 82077
        [4294702.809000] Real Time Clock Driver v1.12
        [4294702.929000] input: PC Speaker
        [4294703.277000] ts: Compaq touchscreen protocol output
        [4294704.712000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
        [4294704.724000] NET: Registered protocol family 17
        [4294715.611000] NET: Registered protocol family 10
        [4294715.611000] Disabled Privacy Extensions on device c0321b80(lo)
        [4294715.611000] IPv6 over IPv4 tunneling driver
        [4294717.083000] ACPI: Power Button (FF) [PWRF]
        [4294717.083000] ACPI: Power Button (CM) [PWRB]
        [4294717.204000] ibm_acpi: ec object not found
        [4294724.464000] [drm] Initialized drm 1.0.0 20040925
        [4294724.468000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
        [4294724.470000] [drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 PRO]
        [4294724.471000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
        [4294724.471000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
        [4294724.471000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
        [4294724.551000] [drm] Loading R200 Microcode
        [4294725.754000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
        [4294725.754000] apm: overridden by ACPI.
        [4294726.058000] eth0: no IPv6 routers present
        [4294726.451000] Bluetooth: Core ver 2.7
        [4294726.451000] NET: Registered protocol family 31
        [4294726.451000] Bluetooth: HCI device and connection manager initialized
        [4294726.451000] Bluetooth: HCI socket layer initialized
        [4294726.528000] Bluetooth: L2CAP ver 2.7
        [4294726.528000] Bluetooth: L2CAP socket layer initialized
        [4294726.544000] Bluetooth: RFCOMM ver 1.5
        [4294726.544000] Bluetooth: RFCOMM socket layer initialized
        [4294726.544000] Bluetooth: RFCOMM TTY layer initialized
        [4295074.813000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
        [4295074.813000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
        [4295076.082000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
        [4295076.082000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
        [4295076.860000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
        [4295076.860000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
        [4295076.927000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
        [4295076.927000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
        [4295078.995000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
        [4295078.995000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
        [4295079.108000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
        [4295079.108000] atkbd.c: Use 'setkeycodes e02a ' to make it known.

      • ubuntu foorumi
        sähl.. kirjoitti:

        c3fbff 00000000 00000000 00000000 00000000 00000000
        [4294667.387000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
        [4294667.387000] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
        [4294667.387000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
        [4294667.387000] CPU: L2 Cache: 256K (64 bytes/line)
        [4294667.387000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
        [4294667.387000] Intel machine check architecture supported.
        [4294667.387000] Intel machine check reporting enabled on CPU#0.
        [4294667.387000] CPU: AMD Athlon(tm) XP 2200 stepping 01
        [4294667.387000] Enabling fast FPU save and restore... done.
        [4294667.387000] Enabling unmasked SIMD FPU exception support... done.
        [4294667.387000] Checking 'hlt' instruction... OK.
        [4294667.391000] checking if image is initramfs... it is
        [4294667.915000] Freeing initrd memory: 5513k freed
        [4294667.917000] ACPI: Looking for DSDT in initrd... not found!
        [4294667.981000] not found!
        [4294667.988000] ENABLING IO-APIC IRQs
        [4294667.988000] ..TIMER: vector=0x31 pin1=2 pin2=-1
        [4294668.099000] NET: Registered protocol family 16
        [4294668.099000] ACPI: bus type pci registered
        [4294668.100000] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
        [4294668.100000] PCI: Using configuration type 1
        [4294668.100000] mtrr: v2.0 (20020519)
        [4294668.100000] ACPI: Subsystem revision 20050729
        [4294668.108000] ACPI: Interpreter enabled
        [4294668.108000] ACPI: Using IOAPIC for interrupt routing
        [4294668.108000] ACPI: PCI Root Bridge [PCI0] (0000:00)
        [4294668.108000] PCI: Probing PCI hardware (bus 00)
        [4294668.108000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
        [4294668.112000] Boot video device is 0000:01:00.0
        [4294668.133000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
        [4294668.136000] ACPI: Power Resource [URP1] (off)
        [4294668.136000] ACPI: Power Resource [URP2] (off)
        [4294668.136000] ACPI: Power Resource [FDDP] (off)
        [4294668.136000] ACPI: Power Resource [LPTP] (off)
        [4294668.138000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 *12 14 15)
        [4294668.139000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
        [4294668.139000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
        [4294668.139000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
        [4294668.139000] Linux Plug and Play Support v0.97 (c) Adam Belay
        [4294668.139000] pnp: PnP ACPI init
        [4294668.144000] pnp: PnP ACPI: found 12 devices
        [4294668.144000] PnPBIOS: Disabled by ACPI PNP
        [4294668.144000] PCI: Using ACPI for IRQ routing
        [4294668.144000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
        [4294668.154000] audit: initializing netlink socket (disabled)
        [4294668.154000] audit: initialized
        [4294668.154000] VFS: Disk quotas dquot_6.5.1
        [4294668.154000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
        [4294668.154000] devfs: 2004-01-31 Richard Gooch ([email protected])
        [4294668.154000] devfs: boot_options: 0x0
        [4294668.154000] Initializing Cryptographic API
        [4294668.154000] isapnp: Scanning for PnP cards...
        [4294668.507000] isapnp: No Plug & Play device found
        [4294668.524000] PNP: PS/2 controller doesn't have AUX irq; using default 0xc
        [4294668.524000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
        [4294668.524000] serio: i8042 AUX port at 0x60,0x64 irq 12
        [4294668.524000] serio: i8042 KBD port at 0x60,0x64 irq 1
        [4294668.524000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
        [4294668.524000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
        [4294668.524000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
        [4294668.526000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
        [4294668.526000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
        [4294668.526000] io scheduler noop registered
        [4294668.526000] io scheduler anticipatory registered
        [4294668.526000] io scheduler deadline registered
        [4294668.526000] io scheduler cfq registered
        [4294668.527000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
        [4294668.527000] NET: Registered protocol family 2
        [4294668.537000] IP: routing cache hash table of 4096 buckets, 32Kbytes
        [4294668.537000] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
        [4294668.537000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
        [4294668.538000] TCP: Hash tables configured (established 32768 bind 32768)
        [4294668.538000] NET: Registered protocol family 8
        [4294668.538000] NET: Registered protocol family 20
        [4294668.538000] ACPI wakeup devices:
        [4294668.538000] PCI0 UAR1 USB4 USB5 PS2K USB USB1 AC9 MC9
        [4294668.538000] ACPI: (supports S0 S1 S4 S5)
        [4294668.538000] Freeing unused kernel memory: 168k freed
        [4294668.554000] vga16fb: initializing
        [4294668.554000] vga16fb: mapped to 0xc00a0000
        [4294668.618000] Console: switching to colour frame buffer device 80x30
        [4294668.618000] fb0: VGA16 VGA frame buffer device
        [4294668.645000] input: AT Translated Set 2 keyboard on isa0060/serio0
        [4294669.757000] Capability LSM initialized
        [4294669.769000] NET: Registered protocol family 1
        [4294669.783000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
        [4294669.783000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
        [4294669.783000] ACPI: bus type ide registered
        [4294669.789000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
        [4294669.789000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
        [4294669.789000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
        [4294669.789000] VP_IDE: chipset revision 6
        [4294669.789000] VP_IDE: not 100% native mode: will probe irqs later
        [4294669.789000] VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
        [4294669.790000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
        [4294669.790000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
        [4294669.790000] Probing IDE interface ide0...
        [4294670.173000] hda: HDS728080PLAT20, ATA DISK drive
        [4294670.785000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
        [4294670.785000] Probing IDE interface ide1...
        [4294671.577000] hdc: SONY CDU4811, ATAPI CD/DVD-ROM drive
        [4294672.291000] hdd: LITE-ON COMBO SOHC-5232K, ATAPI CD/DVD-ROM drive
        [4294672.342000] ide1 at 0x170-0x177,0x376 on irq 15
        [4294672.342000] Probing IDE interface ide2...
        [4294672.855000] Probing IDE interface ide3...
        [4294673.367000] Probing IDE interface ide4...
        [4294673.879000] Probing IDE interface ide5...
        [4294674.394000] hda: max request size: 1024KiB
        [4294674.402000] hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(133)
        [4294674.403000] hda: cache flushes supported
        [4294674.403000] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
        [4294674.431000] hdc: ATAPI 48X CD-ROM drive, 120kB Cache
        [4294674.431000] Uniform CD-ROM driver Revision: 3.20
        [4294674.433000] hdd: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache
        [4294674.783000] Attempting manual resume
        [4294674.785000] swsusp: Suspend partition has wrong signature?
        [4294674.826000] PDC20276: IDE controller at PCI slot 0000:00:0f.0
        [4294674.826000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 19 (level, low) -> IRQ 19
        [4294674.826000] PDC20276: chipset revision 1
        [4294674.826000] PDC20276: 100% native mode on irq 19
        [4294674.826000] ide2: BM-DMA at 0xd800-0xd807, BIOS settings: hde:pio, hdf:pio
        [4294674.826000] ide3: BM-DMA at 0xd808-0xd80f, BIOS settings: hdg:pio, hdh:pio
        [4294674.826000] Probing IDE interface ide2...
        [4294675.345000] Probing IDE interface ide3...
        [4294675.890000] usbcore: registered new driver usbfs
        [4294675.890000] usbcore: registered new driver hub
        [4294675.891000] USB Universal Host Controller Interface driver v2.2
        [4294675.891000] ACPI: PCI Interrupt 0000:00:11.2[D] -> GSI 21 (level, low) -> IRQ 21
        [4294675.891000] PCI: Via IRQ fixup for 0000:00:11.2, from 10 to 5
        [4294675.891000] uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
        [4294675.953000] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
        [4294675.953000] uhci_hcd 0000:00:11.2: irq 21, io base 0x0000cc00
        [4294675.953000] hub 1-0:1.0: USB hub found
        [4294675.953000] hub 1-0:1.0: 2 ports detected
        [4294675.956000] ACPI: PCI Interrupt 0000:00:11.3[D] -> GSI 21 (level, low) -> IRQ 21
        [4294675.956000] PCI: Via IRQ fixup for 0000:00:11.3, from 10 to 5
        [4294675.956000] uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
        [4294676.018000] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
        [4294676.018000] uhci_hcd 0000:00:11.3: irq 21, io base 0x0000c800
        [4294676.018000] hub 2-0:1.0: USB hub found
        [4294676.018000] hub 2-0:1.0: 2 ports detected
        [4294676.021000] ACPI: PCI Interrupt 0000:00:14.0[A] -> GSI 16 (level, low) -> IRQ 16
        [4294676.021000] PCI: Via IRQ fixup for 0000:00:14.0, from 12 to 0
        [4294676.021000] uhci_hcd 0000:00:14.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
        [4294676.083000] uhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
        [4294676.083000] uhci_hcd 0000:00:14.0: irq 16, io base 0x0000c000
        [4294676.083000] hub 3-0:1.0: USB hub found
        [4294676.083000] hub 3-0:1.0: 2 ports detected
        [4294676.086000] ACPI: PCI Interrupt 0000:00:14.1[B] -> GSI 17 (level, low) -> IRQ 17
        [4294676.086000] PCI: Via IRQ fixup for 0000:00:14.1, from 12 to 1
        [4294676.086000] uhci_hcd 0000:00:14.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
        [4294676.122000] usb 1-1: new low speed USB device using uhci_hcd and address 2
        [4294676.148000] uhci_hcd 0000:00:14.1: new USB bus registered, assigned bus number 4
        [4294676.148000] uhci_hcd 0000:00:14.1: irq 17, io base 0x0000bc00
        [4294676.148000] hub 4-0:1.0: USB hub found
        [4294676.148000] hub 4-0:1.0: 2 ports detected
        [4294676.169000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
        [4294676.169000] 8139cp: pci dev 0000:00:13.0 (id 10ec:8139 rev 10) is not an 8139C compatible chip
        [4294676.169000] 8139cp: Try the "8139too" driver instead.
        [4294676.171000] 8139too Fast Ethernet driver 0.9.27
        [4294676.171000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18
        [4294676.171000] eth0: RealTek RTL8139 at 0xc400, 00:20:ed:2e:24:af, IRQ 18
        [4294676.171000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
        [4294676.197000] ACPI: PCI Interrupt 0000:00:14.2[C] -> GSI 18 (level, low) -> IRQ 18
        [4294676.197000] PCI: Via IRQ fixup for 0000:00:14.2, from 12 to 2
        [4294676.197000] ehci_hcd 0000:00:14.2: VIA Technologies, Inc. USB 2.0
        [4294676.197000] ehci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 5
        [4294676.197000] ehci_hcd 0000:00:14.2: irq 18, io mem 0xdfff7e00
        [4294676.198000] ehci_hcd 0000:00:14.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004
        [4294676.198000] hub 5-0:1.0: USB hub found
        [4294676.198000] hub 5-0:1.0: 4 ports detected
        [4294678.252000] usbcore: registered new driver hiddev
        [4294678.270000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:11.2-1
        [4294678.270000] usbcore: registered new driver usbhid
        [4294678.270000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
        [4294678.763000] ACPI: CPU0 (power states: C1[C1])
        [4294678.763000] ACPI: Processor [CPU1] (supports 16 throttling states)
        [4294678.942000] Attempting manual resume
        [4294678.942000] swsusp: Suspend partition has wrong signature?
        [4294678.954000] kjournald starting. Commit interval 5 seconds
        [4294678.954000] EXT3-fs: mounted filesystem with ordered data mode.
        [4294679.984000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
        [4294683.414000] Adding 1510068k swap on /dev/hda5. Priority:-1 extents:1
        [4294683.677000] EXT3 FS on hda1, internal journal
        [4294688.542000] parport: PnPBIOS parport detected.
        [4294688.543000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
        [4294688.629000] lp0: using parport0 (interrupt-driven).
        [4294688.671000] mice: PS/2 mouse device common for all mice
        [4294691.455000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected]
        [4294696.696000] cdrom: open failed.
        [4294696.700000] cdrom: open failed.
        [4294698.821000] Linux agpgart interface v0.101 (c) Dave Jones
        [4294698.832000] agpgart: Detected VIA KT266/KY266x/KT333 chipset
        [4294698.861000] agpgart: AGP aperture is 128M @ 0xe0000000
        [4294698.965000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
        [4294698.981000] shpchp: shpc_init : shpc_cap_offset == 0
        [4294698.981000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
        [4294699.224000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
        [4294700.107000] gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xd000, speed 1217kHz
        [4294700.298000] irda_init()
        [4294700.298000] NET: Registered protocol family 23
        [4294702.188000] Floppy drive(s): fd0 is 1.44M
        [4294702.203000] FDC 0 is a post-1991 82077
        [4294702.809000] Real Time Clock Driver v1.12
        [4294702.929000] input: PC Speaker
        [4294703.277000] ts: Compaq touchscreen protocol output
        [4294704.712000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
        [4294704.724000] NET: Registered protocol family 17
        [4294715.611000] NET: Registered protocol family 10
        [4294715.611000] Disabled Privacy Extensions on device c0321b80(lo)
        [4294715.611000] IPv6 over IPv4 tunneling driver
        [4294717.083000] ACPI: Power Button (FF) [PWRF]
        [4294717.083000] ACPI: Power Button (CM) [PWRB]
        [4294717.204000] ibm_acpi: ec object not found
        [4294724.464000] [drm] Initialized drm 1.0.0 20040925
        [4294724.468000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
        [4294724.470000] [drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 PRO]
        [4294724.471000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
        [4294724.471000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
        [4294724.471000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
        [4294724.551000] [drm] Loading R200 Microcode
        [4294725.754000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
        [4294725.754000] apm: overridden by ACPI.
        [4294726.058000] eth0: no IPv6 routers present
        [4294726.451000] Bluetooth: Core ver 2.7
        [4294726.451000] NET: Registered protocol family 31
        [4294726.451000] Bluetooth: HCI device and connection manager initialized
        [4294726.451000] Bluetooth: HCI socket layer initialized
        [4294726.528000] Bluetooth: L2CAP ver 2.7
        [4294726.528000] Bluetooth: L2CAP socket layer initialized
        [4294726.544000] Bluetooth: RFCOMM ver 1.5
        [4294726.544000] Bluetooth: RFCOMM socket layer initialized
        [4294726.544000] Bluetooth: RFCOMM TTY layer initialized
        [4295074.813000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
        [4295074.813000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
        [4295076.082000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
        [4295076.082000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
        [4295076.860000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
        [4295076.860000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
        [4295076.927000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
        [4295076.927000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
        [4295078.995000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
        [4295078.995000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
        [4295079.108000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
        [4295079.108000] atkbd.c: Use 'setkeycodes e02a ' to make it known.

        " [4294671.577000] hdc: SONY CDU4811, ATAPI CD/DVD-ROM drive
        [4294672.291000] hdd: LITE-ON COMBO SOHC-5232K, ATAPI CD/DVD-ROM drive
        [4294674.431000] hdc: ATAPI 48X CD-ROM drive, 120kB Cache
        [4294674.431000] Uniform CD-ROM driver Revision: 3.20
        [4294674.433000] hdd: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache "

        Jeps eli ei nähtävästi ole laitteesta kiinni vaan jostain muusta, kysäiseppä ubuntufoorumilta, siellä varmaan tiedetään paremmin:
        http://forum.ubuntu-fi.org/

    Ketjusta on poistettu 0 sääntöjenvastaista viestiä.

    Takaisin ylös

    Luetuimmat keskustelut

    1. Virkamiehille tarvitaan tuntuvat palkankorotukset

      Naistenpäivänä on syytä muistuttaa, että virkamiehen euro on vain 80 senttiä. Palkat tulee saattaa samalle tasolle yksi
      Maailman menoa
      38
      3672

    2. Riikka Purran kaudella nousi bensan hinta yli 2 euron

      Muistatteko kuinka edellisen vasemmistohallituksen aikana, ns. Marinin aikakaudella, bensiiniä sai 1,3 euron litrahinnal
      Maailman menoa
      28
      3232

    3. Jäikö meidän välit

      Mielestäsi Kesken?
      Ikävä
      69
      2878

    4. Olisipa saanut sinuun

      Tutustua paremmin. Harmi että aloin lopulta jännittämään kun näytit tunteesi niin voimakkaasti ja lähestyit niin voimaak
      Ikävä
      91
      2720

    5. Miks tän meidän

      Rakkauden on pitänyt olla näin vaikeaa?
      Ikävä
      35
      1748

    6. Mitäs nyt sijoittajat?

      Pörssit laskevat maailmalla Iranin sodan takia ja muutenkin ovat olleet Trumpin vallan alla epävarmat. Ainoa, mikä on no
      Maailman menoa
      81
      1699

    7. muista olla

      VAROVAINEN! m
      Ikävä
      22
      1518

    8. Elän vastoin

      Kaikkia arvoja kun en pysy sinusta erossa.
      Ikävä
      28
      1507

    9. Onneksi on edes yksi kuva

      Susta mitä voin välillä ihastella ja kaipailla sua😔
      Ikävä
      28
      1478

    10. Olisitpa se hellä

      Ja herkkä minkä kuvan sain sinusta irl. Haluaisin että elämässäni olisi sellainen joka arvostaa minua juuri sellaisena k
      Ikävä
      23
      1474
    Aihe
    TietosuojaselosteKäyttöehdotEvästeasetuksetSäännöt