Uusi ZoneAlarm ei toimi.

Tulla alempana jo kyseltiin. Ensin latasin ja asensin 5.6. tulleen version 6.5.700 000 download.com:ista - ei edes avautunut ohjelmavalikosta, ja alapalkkiin ei tullut kuvaketta, eikä päässyt nettiin.
Sitten latasin ja asensin sen zonelabs.com:ista, ja versionumerokin näkyy vasta latauksessa - aivan sama tulos.
Mistä saan sen vanhan toimivan takaisin? Eikö mistään enää?
Ilmaista Sygateakaan ei enää löydy. Eipä haluttaisi jäädä Windowsin risupalomuurin varaan.
92069
Äänestä

Muut lukivat myös

Vastaukset 9

Vanhimmat

itelles kotimainen ja hyvä palomuuri mullakin oli koneessa tämä vnahempi ja sitten uudempi versio on vielä parempi!

http://netti-kilpi.fleasome.com/

En ikinä tykänny ko. ZONE ALARMISTA!

Äänestä

Otinpa ZA:n tilalle Kerion. Millaisia käyttökokemuksia?

Äänestä

Täältä löytyy sekä ZoneAlarm että Sygate, joka minusta on paras palomuuri.

http://www.oldversion.com/

Muista ennen kummankaan version asentamista, että poistat Zonen kaikki mahdolliset ylijäämätiedot. Niitä löytyy satoja ja ne vain sotkevat muiden palomuurien käyttöä. Ohjeet niiden poistamiseen löytyy ZoneAlarmin omilta sivuilta.

Äänestä
  • Vaikka joku ohjelma poistaa itsensä, ja ilmoittaa, että poisto suoritettu, niin rekisteriin jää roippeita niin paljon, että edes CCleanerin virheet-ajo ei riitä. Perään pitää ajaa vielä RegCleanerilla, että saa loputkin rojut pois.
    Tämä on tullut eteen joka ohjelman poistossa.

    Äänestä

  • Jep. kirjoitti:

    Vaikka joku ohjelma poistaa itsensä, ja ilmoittaa, että poisto suoritettu, niin rekisteriin jää roippeita niin paljon, että edes CCleanerin virheet-ajo ei riitä. Perään pitää ajaa vielä RegCleanerilla, että saa loputkin rojut pois.
    Tämä on tullut eteen joka ohjelman poistossa.

    Ei löytänyt nuo rekisterinpuhdistusohjelmat kaikkia niitä tiedostoja, jotka piti poistaa ennenkuin sain Zonen asennettua uudestaan.

    Zonen sivuilta kopioin nämä ohjeet, jonka avulla sain homman pelaamaan:

    Virheilmoitus:

    This application has failed to start because zpy.dll was not found. Re-installing the application may fix this problem.

    Korjausohjeet:

    Now click Start -> Programs -> Zone Labs -> Uninstall. Be sure to say YES to the security check.

    WARNING - Do NOT run the ZoneAlarm Uninstall program while in Safe Mode unless absolutely necessary. The program may not be able to make the proper registry changes in Safe Mode, thus generating errors after a reboot.

    REBOOT.

    To make sure that you can see the ZoneAlarm system files, if they are still on your computer:
    a. Right-click on Start, then left-click on Explore. When the Windows Explorer panel appears:

    - In Windows 95, 98, 98SE: Click View -> Options (in Windows 98/98SE, this will be called "Folder Options"). Click the "View" tab, then click the "Show all files" radio button.

    - In Windows ME, XP, 2000: Click Tools -> Folder Options. Click the "View" tab, then click the "Show hidden files and folders" radio button.

    b. Make sure you also UNcheck the box to "Hide Protected Operating System Files" if you have one.

    c. When searching, be sure it searches ALL hidden files and folders (in XP: check Advanced search settings)

    d. Click OK.

    IMPORTANT NOTE: Making modifications to system files may disable crucial functions of your Windows operating system. We strongly suggest re-enabling the "Hide files and folders" feature once all ZoneAlarm files have been removed.

    Click on Start, then Search or Find, and select Files. Make sure that the location box is set to search your local hard drive (usually C :) or All Local Drives.

    Type the following exactly and delete the folder:

    zonelabs (under your SYSTEM or SYSTEM32 folder)
    "zone labs" (under your Program Files folder)
    "Internet logs" (under your Windows or WINNT folder)

    Type the following exactly - delete files found in \Windows or any subfolder below it, in your \Temp folder, or in the Windows "Pre-Fetch" folder):

    vsconfig.xml
    vsdata.dll
    vsdata95.vxd
    vsdatant.sys
    vsmon.*
    vsmonapi.dll
    vsnetutils.dll
    vspubapi.dll
    zaplus.*
    zapro.*
    zllictbl.dat
    zlparser.dll
    zonealarm.exe
    zoneband.dll
    vsutil.dll (please right-click, Properties -> Version to be sure it is a ZA file. Do NOT delete this file unless it is a Zone Labs file!)

    Make sure your Recycle Bin is empty (right-click and select Empty).

    REBOOT

    Äänestä

  • Pete. kirjoitti:

    Ei löytänyt nuo rekisterinpuhdistusohjelmat kaikkia niitä tiedostoja, jotka piti poistaa ennenkuin sain Zonen asennettua uudestaan.

    Zonen sivuilta kopioin nämä ohjeet, jonka avulla sain homman pelaamaan:

    Virheilmoitus:

    This application has failed to start because zpy.dll was not found. Re-installing the application may fix this problem.

    Korjausohjeet:

    Now click Start -> Programs -> Zone Labs -> Uninstall. Be sure to say YES to the security check.

    WARNING - Do NOT run the ZoneAlarm Uninstall program while in Safe Mode unless absolutely necessary. The program may not be able to make the proper registry changes in Safe Mode, thus generating errors after a reboot.

    REBOOT.

    To make sure that you can see the ZoneAlarm system files, if they are still on your computer:
    a. Right-click on Start, then left-click on Explore. When the Windows Explorer panel appears:

    - In Windows 95, 98, 98SE: Click View -> Options (in Windows 98/98SE, this will be called "Folder Options"). Click the "View" tab, then click the "Show all files" radio button.

    - In Windows ME, XP, 2000: Click Tools -> Folder Options. Click the "View" tab, then click the "Show hidden files and folders" radio button.

    b. Make sure you also UNcheck the box to "Hide Protected Operating System Files" if you have one.

    c. When searching, be sure it searches ALL hidden files and folders (in XP: check Advanced search settings)

    d. Click OK.

    IMPORTANT NOTE: Making modifications to system files may disable crucial functions of your Windows operating system. We strongly suggest re-enabling the "Hide files and folders" feature once all ZoneAlarm files have been removed.

    Click on Start, then Search or Find, and select Files. Make sure that the location box is set to search your local hard drive (usually C :) or All Local Drives.

    Type the following exactly and delete the folder:

    zonelabs (under your SYSTEM or SYSTEM32 folder)
    "zone labs" (under your Program Files folder)
    "Internet logs" (under your Windows or WINNT folder)

    Type the following exactly - delete files found in \Windows or any subfolder below it, in your \Temp folder, or in the Windows "Pre-Fetch" folder):

    vsconfig.xml
    vsdata.dll
    vsdata95.vxd
    vsdatant.sys
    vsmon.*
    vsmonapi.dll
    vsnetutils.dll
    vspubapi.dll
    zaplus.*
    zapro.*
    zllictbl.dat
    zlparser.dll
    zonealarm.exe
    zoneband.dll
    vsutil.dll (please right-click, Properties -> Version to be sure it is a ZA file. Do NOT delete this file unless it is a Zone Labs file!)

    Make sure your Recycle Bin is empty (right-click and select Empty).

    REBOOT

    tolvana löytää nuo poistettavat tiedostot, kun vanhan ZA:n roippeet on yhtä tiukassa, kuin paksa Junttilan tuvan seinässä?
    Miksi tehty poisto niiiiiiiin vaikeaksi?

    Äänestä

  • Mutta mistä... kirjoitti:

    tolvana löytää nuo poistettavat tiedostot, kun vanhan ZA:n roippeet on yhtä tiukassa, kuin paksa Junttilan tuvan seinässä?
    Miksi tehty poisto niiiiiiiin vaikeaksi?

    Etsitoiminnolla löytyy ja system32 kansiosta taitaa löytyä ainakon suurin osa.

    C:\WINDOWS\system32

    Äänestä

  • Pete. kirjoitti:

    Ei löytänyt nuo rekisterinpuhdistusohjelmat kaikkia niitä tiedostoja, jotka piti poistaa ennenkuin sain Zonen asennettua uudestaan.

    Zonen sivuilta kopioin nämä ohjeet, jonka avulla sain homman pelaamaan:

    Virheilmoitus:

    This application has failed to start because zpy.dll was not found. Re-installing the application may fix this problem.

    Korjausohjeet:

    Now click Start -> Programs -> Zone Labs -> Uninstall. Be sure to say YES to the security check.

    WARNING - Do NOT run the ZoneAlarm Uninstall program while in Safe Mode unless absolutely necessary. The program may not be able to make the proper registry changes in Safe Mode, thus generating errors after a reboot.

    REBOOT.

    To make sure that you can see the ZoneAlarm system files, if they are still on your computer:
    a. Right-click on Start, then left-click on Explore. When the Windows Explorer panel appears:

    - In Windows 95, 98, 98SE: Click View -> Options (in Windows 98/98SE, this will be called "Folder Options"). Click the "View" tab, then click the "Show all files" radio button.

    - In Windows ME, XP, 2000: Click Tools -> Folder Options. Click the "View" tab, then click the "Show hidden files and folders" radio button.

    b. Make sure you also UNcheck the box to "Hide Protected Operating System Files" if you have one.

    c. When searching, be sure it searches ALL hidden files and folders (in XP: check Advanced search settings)

    d. Click OK.

    IMPORTANT NOTE: Making modifications to system files may disable crucial functions of your Windows operating system. We strongly suggest re-enabling the "Hide files and folders" feature once all ZoneAlarm files have been removed.

    Click on Start, then Search or Find, and select Files. Make sure that the location box is set to search your local hard drive (usually C :) or All Local Drives.

    Type the following exactly and delete the folder:

    zonelabs (under your SYSTEM or SYSTEM32 folder)
    "zone labs" (under your Program Files folder)
    "Internet logs" (under your Windows or WINNT folder)

    Type the following exactly - delete files found in \Windows or any subfolder below it, in your \Temp folder, or in the Windows "Pre-Fetch" folder):

    vsconfig.xml
    vsdata.dll
    vsdata95.vxd
    vsdatant.sys
    vsmon.*
    vsmonapi.dll
    vsnetutils.dll
    vspubapi.dll
    zaplus.*
    zapro.*
    zllictbl.dat
    zlparser.dll
    zonealarm.exe
    zoneband.dll
    vsutil.dll (please right-click, Properties -> Version to be sure it is a ZA file. Do NOT delete this file unless it is a Zone Labs file!)

    Make sure your Recycle Bin is empty (right-click and select Empty).

    REBOOT

    niin eli suomeks jos saisi kyseiseen ongelmaan korjaus ohjeet :D

    Äänestä

Kommentoi aloitusta


Ei ei. kirjoitti:

Tulla alempana jo kyseltiin. Ensin latasin ja asensin 5.6. tulleen version 6.5.700 000 download.com:ista - ei edes avautunut ohjelmavalikosta, ja alapalkkiin ei tullut kuvaketta, eikä päässyt nettiin.
Sitten latasin ja asensin sen zonelabs.com:ista, ja versionumerokin näkyy vasta latauksessa - aivan sama tulos.
Mistä saan sen vanhan toimivan takaisin? Eikö mistään enää?
Ilmaista Sygateakaan ei enää löydy. Eipä haluttaisi jäädä Windowsin risupalomuurin varaan.

Anonyymi
5000

Ilmoita asiaton sisältö

  • Sisältää materiaalia, joka on loukkaavaa, herjaavaa, rasistista, uhkailevaa tai ahdistelevaa.

  • Materiaali sisältää nimiä, yhteystietoja tai muita henkilökohtaisia tietoja. Julkisuuden henkilöistä, julkisissa viroissa toimivista ihmisistä sekä yritysten vastuuhenkilöistä saa keskustella työhön liittyen. Myös yksityiselämään liittyvistä asioista voi keskustella siltä osin, kuin niistä on julkisesti kerrottu.

  • Sisältää lapsille haitallista tai heiltä kiellettyä materiaalia. Seksuaalinen sisältö on sallittua aiheeseen tarkoitetuilla palstoilla, joiden ikäraja on 18 vuotta.

  • Lainvastaista sisältöä voi olla mm. yksityiselämää loukkaavan tiedon levitys, kiihottaminen kansanryhmää vastaan, laiton uhkaaminen, alaikäisiin liittyvä seksuaalinen sisältö/grooming, petokset, identiteettivarkaudet, kunnianloukkaukset ja tekijänoikeusrikkomukset.

  • Sisältö ei liity palstan tai keskusteluketjun aiheeseen.

  • Viesti ei ole suomea tai ruotsia (pl. International Forums), se sisältää mainontaa, se sisältää tekijänoikeuksin suojattua materiaalia, se on massapostitus tai jokin muu syy.

Jaa keskustelu