Rekisteröidy

Ilmoitukset

Ladataan…

    Näytä kaikki

    miten sais

    suse 10.1ssä toimimaan.
    Tältä näyttää lspci:n rivi
    01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Unknown device 8168 (rev 01)
    ja yast-network devices-network card
    näkee sen myös.
    Mutta kun yritän ajaa sen ylös sanoo vaan
    eth0: unknown interface: No such device
    7282
    Äänestä

    Muut lukivat myös

    Vastaukset 7

    Vanhimmat

    • jep jep.

      Äänestä

    • ============ start debug info ============
      libhd version 12.29u (x86-64)
      using /var/lib/hardware
      kernel version is 2.6
      ----- /proc/cmdline -----
      root=/dev/hdc4 vga=0x317 resume=/dev/hdc3 splash=silent
      ----- /proc/cmdline end -----
      debug = 0xff7ffff7
      probe = 0x00138fc4aa17fffdfffe ( memory pci isapnp net floppy misc misc.serial misc.par misc.floppy serial cpu bios monitor mouse scsi usb -usb.mods adb modem modem.usb parallel parallel.lp parallel.zip isa isa.isdn isdn kbd prom sbus int braille braille.alva braille.fhp braille.ht -ignx11 sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod braille.baum -manual fb pppoe -scan pcmcia -fork -parallel.imm s390 -cpuemu -sysfs -s390disks udev block block.cdrom block.part edd edd.mod -bios.ddc -bios.fb -bios.mode input block.mods bios.vesa -cpuemu.debug -scsi.noserial wlan -bios.crc -hal -bios.vram -max -lxrc)
      shm: attached segment 524291 at 0x2b8a0237c000
      >> hal.1: read hal data
      hal: connected to: :1.24
      ----- hal device list -----
      0: udi = '/org/freedesktop/Hal/devices/pci_10de_26c_oss_pcm_0_0_0'
      info.callouts.add = { 'hal-resmgr' }
      info.callouts.remove = { 'hal-resmgr' }
      info.capabilities = { 'oss' }
      info.category = 'oss'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c'
      info.product = 'ALC861 Analog OSS PCM Device'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_oss_pcm_0_0_0'
      linux.device_file = '/dev/audio'
      linux.hotplug_type = 2 (0x2)
      linux.subsystem = 'sound'
      linux.sysfs_path = '/sys/class/sound/audio'
      oss.card = 0 (0x0)
      oss.card_id = 'NVidia'
      oss.device = 0 (0x0)
      oss.device_file = '/dev/audio'
      oss.device_id = 'ALC861 Analog'
      oss.physical_device = '/org/freedesktop/Hal/devices/pci_10de_26c'
      oss.type = 'pcm'
      resmgr.class = 'sound'
      resmgr.device = '/dev/audio'

      1: udi = '/org/freedesktop/Hal/devices/pci_10de_26c_oss_pcm_0_0'
      info.callouts.add = { 'hal-resmgr' }
      info.callouts.remove = { 'hal-resmgr' }
      info.capabilities = { 'oss' }
      info.category = 'oss'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c'
      info.product = 'ALC861 Analog OSS PCM Device'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_oss_pcm_0_0'
      linux.device_file = '/dev/dsp'
      linux.hotplug_type = 2 (0x2)
      linux.subsystem = 'sound'
      linux.sysfs_path = '/sys/class/sound/dsp'
      oss.card = 0 (0x0)
      oss.card_id = 'NVidia'
      oss.device = 0 (0x0)
      oss.device_file = '/dev/dsp'
      oss.device_id = 'ALC861 Analog'
      oss.physical_device = '/org/freedesktop/Hal/devices/pci_10de_26c'
      oss.type = 'pcm'
      resmgr.class = 'sound'
      resmgr.device = '/dev/dsp'

      2: udi = '/org/freedesktop/Hal/devices/pci_10de_26c_oss_pcm_0_1'
      info.callouts.add = { 'hal-resmgr' }
      info.callouts.remove = { 'hal-resmgr' }
      info.capabilities = { 'oss' }
      info.category = 'oss'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c'
      info.product = 'ALC861 Analog OSS PCM Device'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_oss_pcm_0_1'
      linux.device_file = '/dev/adsp'
      linux.hotplug_type = 2 (0x2)
      linux.subsystem = 'sound'
      linux.sysfs_path = '/sys/class/sound/adsp'
      oss.card = 0 (0x0)
      oss.card_id = 'NVidia'
      oss.device = 1 (0x1)
      oss.device_file = '/dev/adsp'
      oss.device_id = 'ALC861 Analog'
      oss.physical_device = '/org/freedesktop/Hal/devices/pci_10de_26c'
      oss.type = 'pcm'
      resmgr.class = 'sound'
      resmgr.device = '/dev/adsp'

      3: udi = '/org/freedesktop/Hal/devices/pci_10de_26c_oss_mixer_0__1'
      info.callouts.add = { 'hal-resmgr' }
      info.callouts.remove = { 'hal-resmgr' }
      info.capabilities = { 'oss' }
      info.category = 'oss'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_26c'
      info.product = 'ALC861 Analog OSS Control Device'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_26c_oss_mixer_0__1'
      linux.device_file = '/dev/mixer'
      linux.hotplug_type = 2 (0x2)
      linux.subsystem = 'sound'
      linux.sysfs_path = '/sys/class/sound/mixer'
      oss.card = 0 (0x0)
      oss.card_id = 'NVidia'
      oss.device_file = '/dev/mixer'
      oss.device_id = 'ALC861 Analog'
      oss.physical_device = '/org/freedesktop/Hal/devices/pci_10de_26c'
      oss.type = 'mixer'
      resmgr.class = 'sound'
      resmgr.device = '/dev/mixer'

      4: udi = '/org/freedesktop/Hal/devices/acpi_SLPB'
      button.has_state = false
      button.type = 'sleep'
      info.capabilities = { 'button' }
      info.category = 'button'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'Sleep Button'
      info.udi = '/org/freedesktop/Hal/devices/acpi_SLPB'
      linux.acpi_path = '/proc/acpi/button/sleep/SLPB'
      linux.acpi_type = 9 (0x9)
      linux.hotplug_type = 4 (0x4)

      5: udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
      button.has_state = false
      button.type = 'power'
      info.capabilities = { 'button' }
      info.category = 'button'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'Power Button'
      info.udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
      linux.acpi_path = '/proc/acpi/button/power/PWRF'
      linux.acpi_type = 9 (0x9)
      linux.hotplug_type = 4 (0x4)

      6: udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
      button.has_state = false
      button.type = 'power'
      info.capabilities = { 'button' }
      info.category = 'button'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'Power Button'
      info.udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
      linux.acpi_path = '/proc/acpi/button/power/PWRB'
      linux.acpi_type = 9 (0x9)
      linux.hotplug_type = 4 (0x4)

      7: udi = '/org/freedesktop/Hal/devices/acpi_LID'
      button.has_state = true
      button.state.value = false
      button.type = 'lid'
      info.capabilities = { 'button' }
      info.category = 'button'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'Lid Switch'
      info.udi = '/org/freedesktop/Hal/devices/acpi_LID'
      linux.acpi_path = '/proc/acpi/button/lid/LID'
      linux.acpi_type = 9 (0x9)
      linux.hotplug_type = 4 (0x4)

      8: udi = '/org/freedesktop/Hal/devices/acpi_AC0'
      ac_adapter.present = true
      info.capabilities = { 'ac_adapter' }
      info.category = 'ac_adapter'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'AC Adapter'
      info.udi = '/org/freedesktop/Hal/devices/acpi_AC0'
      linux.acpi_path = '/proc/acpi/ac_adapter/AC0'
      linux.acpi_type = 3 (0x3)
      linux.hotplug_type = 4 (0x4)

      9: udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
      info.capabilities = { 'processor' }
      info.category = 'processor'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'Processor'
      info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
      linux.acpi_path = '/proc/acpi/processor/CPU1'
      linux.acpi_type = 1 (0x1)
      linux.hotplug_type = 4 (0x4)
      processor.can_throttle = true
      processor.number = 0 (0x0)

      10: udi = '/org/freedesktop/Hal/devices/acpi_CPU2'
      info.capabilities = { 'processor' }
      info.category = 'processor'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'Processor'
      info.udi = '/org/freedesktop/Hal/devices/acpi_CPU2'
      linux.acpi_path = '/proc/acpi/processor/CPU2'
      linux.acpi_type = 1 (0x1)
      linux.hotplug_type = 4 (0x4)
      processor.can_throttle = false
      processor.number = 1 (0x1)

      11: udi = '/org/freedesktop/Hal/devices/acpi_BAT0'
      battery.charge_level.capacity_state = 'ok'
      battery.charge_level.current = 71291600 (0x43fd2d0)
      battery.charge_level.design = 68968000 (0x41c5e40)
      battery.charge_level.granularity_1 = 29600 (0x73a0)
      battery.charge_level.granularity_2 = 532800 (0x82140)
      battery.charge_level.last_full = 71572800 (0x4441d40)
      battery.charge_level.low = 3566800 (0x366cd0)
      battery.charge_level.percentage = 99 (0x63)
      battery.charge_level.rate = 0 (0x0)
      battery.charge_level.unit = 'mWh'
      battery.charge_level.warning = 7148400 (0x6d1370)
      battery.is_rechargeable = true
      battery.model = 'A6Tc'
      battery.present = true
      battery.rechargeable.is_charging = false
      battery.rechargeable.is_discharging = false
      battery.reporting.current = 4817 (0x12d1)
      battery.reporting.design = 4660 (0x1234)
      battery.reporting.granularity_1 = 2 (0x2)
      battery.reporting.granularity_2 = 36 (0x24)
      battery.reporting.last_full = 4836 (0x12e4)
      battery.reporting.low = 241 (0xf1)
      battery.reporting.rate = 0 (0x0)
      battery.reporting.unit = 'mAh'
      battery.reporting.warning = 483 (0x1e3)
      battery.technology = 'LION'
      battery.type = 'primary'
      battery.vendor = 'ASUS'
      battery.voltage.current = 16747 (0x416b)
      battery.voltage.design = 14800 (0x39d0)
      battery.voltage.unit = 'mV'
      info.capabilities = { 'battery' }
      info.category = 'battery'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'Battery Bay'
      info.udi = '/org/freedesktop/Hal/devices/acpi_BAT0'
      linux.acpi_path = '/proc/acpi/battery/BAT0'
      linux.acpi_type = 0 (0x0)
      linux.hotplug_type = 4 (0x4)

      12: udi = '/org/freedesktop/Hal/devices/volume_uuid_9877_489A'
      block.device = '/dev/hdc1'
      block.is_volume = true
      block.major = 22 (0x16)
      block.minor = 1 (0x1)
      block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_3PL07RLF'
      info.capabilities = { 'volume', 'block' }
      info.category = 'volume'
      info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
      info.parent = '/org/freedesktop/Hal/devices/storage_serial_3PL07RLF'
      info.product = 'RECOVERY'
      info.udi = '/org/freedesktop/Hal/devices/volume_uuid_9877_489A'
      linux.hotplug_type = 3 (0x3)
      linux.sysfs_path = '/sys/block/hdc/hdc1'
      linux.sysfs_path_device = '/sys/block/hdc/hdc1'
      org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject' }
      org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
      org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
      volume.block_size = 512 (0x200)
      volume.fstype = 'vfat'
      volume.fsusage = 'filesystem'
      volume.fsversion = 'FAT32'
      volume.ignore = true
      volume.is_disc = false
      volume.is_mounted = false
      volume.is_partition = true
      volume.label = 'RECOVERY'
      volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'uid=', 'flush' }
      volume.mount.valid_other_fs = { 'subfs' }
      volume.mount_point = ''
      volume.num_blocks = 3903732 (0x3b90f4)
      volume.partition.msdos_part_table_type = 27 (0x1b)
      volume.partition.number = 1 (0x1)
      volume.policy.desired_mount_point = 'RECOVERY'
      volume.policy.mount_filesystem = 'vfat'
      volume.policy.should_mount = false
      volume.size = 1998710784ull (0x7721e800ull)
      volume.unmount.valid_options = { 'lazy' }
      volume.uuid = '9877-489A'

      13: udi = '/org/freedesktop/Hal/devices/volume_uuid_9CC4_E423'
      block.device = '/dev/hdc2'
      block.is_volume = true
      block.major = 22 (0x16)
      block.minor = 2 (0x2)
      block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_3PL07RLF'
      info.capabilities = { 'volume', 'block' }
      info.category = 'volume'
      info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
      info.parent = '/org/freedesktop/Hal/devices/storage_serial_3PL07RLF'
      info.product = 'Volume (vfat)'
      info.udi = '/org/freedesktop/Hal/devices/volume_uuid_9CC4_E423'
      linux.hotplug_type = 3 (0x3)
      linux.sysfs_path = '/sys/block/hdc/hdc2'
      linux.sysfs_path_device = '/sys/block/hdc/hdc2'
      org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject' }
      org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
      org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
      volume.block_size = 512 (0x200)
      volume.fstype = 'vfat'
      volume.fsusage = 'filesystem'
      volume.fsversion = 'FAT32'
      volume.ignore = true
      volume.is_disc = false
      volume.is_mounted = true
      volume.is_partition = true
      volume.label = ''
      volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'uid=', 'flush' }
      volume.mount.valid_other_fs = { 'subfs' }
      volume.mount_point = '/windows/C'
      volume.num_blocks = 115073595 (0x6dbe23b)
      volume.partition.msdos_part_table_type = 12 (0xc)
      volume.partition.number = 2 (0x2)
      volume.policy.desired_mount_point = 'idedisk'
      volume.policy.mount_filesystem = 'vfat'
      volume.policy.should_mount = true
      volume.size = 58917680640ull (0xdb7c47600ull)
      volume.unmount.valid_options = { 'lazy' }
      volume.uuid = '9CC4-E423'

      14: udi = '/org/freedesktop/Hal/devices/volume_part3_size_509967360'
      block.device = '/dev/hdc3'
      block.is_volume = true
      block.major = 22 (0x16)
      block.minor = 3 (0x3)
      block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_3PL07RLF'
      info.capabilities = { 'volume', 'block' }
      info.category = 'volume'
      info.parent = '/org/freedesktop/Hal/devices/storage_serial_3PL07RLF'
      info.product = 'Volume (swap)'
      info.udi = '/org/freedesktop/Hal/devices/volume_part3_size_509967360'
      linux.hotplug_type = 3 (0x3)
      linux.sysfs_path = '/sys/block/hdc/hdc3'
      linux.sysfs_path_device = '/sys/block/hdc/hdc3'
      volume.block_size = 512 (0x200)
      volume.fstype = 'swap'
      volume.fsusage = 'other'
      volume.fsversion = '2'
      volume.ignore = true
      volume.is_disc = false
      volume.is_mounted = false
      volume.is_partition = true
      volume.label = ''
      volume.mount_point = ''
      volume.num_blocks = 996030 (0xf32be)
      volume.partition.msdos_part_table_type = 130 (0x82)
      volume.partition.number = 3 (0x3)
      volume.size = 509967360ull (0x1e657c00ull)
      volume.uuid = ''

      15: udi = '/org/freedesktop/Hal/devices/volume_uuid_32e7a5b3_f6fa_413f_99ca_1afa7c242a1c'
      block.device = '/dev/hdc4'
      block.is_volume = true
      block.major = 22 (0x16)
      block.minor = 4 (0x4)
      block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_3PL07RLF'
      info.capabilities = { 'volume', 'block' }
      info.category = 'volume'
      info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
      info.parent = '/org/freedesktop/Hal/devices/storage_serial_3PL07RLF'
      info.product = 'Volume (reiserfs)'
      info.udi = '/org/freedesktop/Hal/devices/volume_uuid_32e7a5b3_f6fa_413f_99ca_1afa7c242a1c'
      linux.hotplug_type = 3 (0x3)
      linux.sysfs_path = '/sys/block/hdc/hdc4'
      linux.sysfs_path_device = '/sys/block/hdc/hdc4'
      org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject' }
      org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
      org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
      volume.block_size = 512 (0x200)
      volume.fstype = 'reiserfs'
      volume.fsusage = 'filesystem'
      volume.fsversion = '3.6'
      volume.ignore = true
      volume.is_disc = false
      volume.is_mounted = true
      volume.is_partition = true
      volume.label = ''
      volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet' }
      volume.mount.valid_other_fs = { 'subfs' }
      volume.mount_point = '/'
      volume.num_blocks = 75393045 (0x47e6815)
      volume.partition.msdos_part_table_type = 131 (0x83)
      volume.partition.number = 4 (0x4)
      volume.policy.desired_mount_point = 'idedisk'
      volume.policy.mount_filesystem = 'reiserfs'
      volume.policy.should_mount = true
      volume.size = 38601239040ull (0x8fcd02a00ull)
      volume.unmount.valid_options = { 'lazy' }
      volume.uuid = '32e7a5b3-f6fa-413f-99ca-1afa7c242a1c'

      16: udi = '/org/freedesktop/Hal/devices/storage_serial_3PL07RLF'
      block.device = '/dev/hdc'
      block.is_volume = false
      block.major = 22 (0x16)
      block.minor = 0 (0x0)
      block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_3PL07RLF'
      info.capabilities = { 'storage', 'block' }
      info.category = 'storage'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_265_ide_1_0'
      info.product = 'ST9100824A'
      info.udi = '/org/freedesktop/Hal/devices/storage_serial_3PL07RLF'
      linux.hotplug_type = 3 (0x3)
      linux.sysfs_path = '/sys/block/hdc'
      linux.sysfs_path_device = '/sys/block/hdc'
      storage.automount_enabled_hint = true
      storage.bus = 'ide'
      storage.drive_type = 'disk'
      storage.firmware_version = '3.04'
      storage.hotpluggable = false
      storage.media_check_enabled = false
      storage.model = 'ST9100824A'
      storage.no_partitions_hint = false
      storage.physical_device = '/org/freedesktop/Hal/devices/pci_10de_265_ide_1_0'
      storage.policy.should_mount = false
      storage.removable = false
      storage.requires_eject = false
      storage.serial = '3PL07RLF'
      storage.vendor = ''
      volume.ignore = true

      17: udi = '/org/freedesktop/Hal/devices/storage_serial_K0121B00357'
      block.device = '/dev/hda'
      block.is_volume = false
      block.major = 3 (0x3)
      block.minor = 0 (0x0)
      block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_K0121B00357'
      info.addons = { 'hald-addon-storage' }
      info.callouts.add = { 'hal-resmgr' }
      info.callouts.remove = { 'hal-resmgr' }
      info.capabilities = { 'storage', 'block', 'storage.cdrom' }
      info.category = 'storage'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_265_ide_0_0'
      info.product = 'HL-DT-ST DVDRAM GMA-4082N'
      info.udi = '/org/freedesktop/Hal/devices/storage_serial_K0121B00357'
      linux.hotplug_type = 3 (0x3)
      linux.sysfs_path = '/sys/block/hda'
      linux.sysfs_path_device = '/sys/block/hda'
      resmgr.class = 'cdrom'
      storage.automount_enabled_hint = true
      storage.bus = 'ide'
      storage.cdrom.cdr = true
      storage.cdrom.cdrw = true
      storage.cdrom.dvd = true
      storage.cdrom.dvdplusr = true
      storage.cdrom.dvdplusrdl = true
      storage.cdrom.dvdplusrw = true
      storage.cdrom.dvdplusrwdl = false
      storage.cdrom.dvdr = true
      storage.cdrom.dvdram = true
      storage.cdrom.dvdrw = true
      storage.cdrom.read_speed = 4234 (0x108a)
      storage.cdrom.support_media_changed = true
      storage.cdrom.write_speed = 4234 (0x108a)
      storage.cdrom.write_speeds = { '4234', '2822', '1764', '706' }
      storage.drive_type = 'cdrom'
      storage.firmware_version = 'HJ02'
      storage.hotpluggable = false
      storage.media_check_enabled = true
      storage.model = 'HL-DT-ST DVDRAM GMA-4082N'
      storage.no_partitions_hint = true
      storage.physical_device = '/org/freedesktop/Hal/devices/pci_10de_265_ide_0_0'
      storage.policy.desired_mount_point = 'dvdrecorder'
      storage.policy.mount_filesystem = 'auto'
      storage.policy.should_mount = true
      storage.removable = true
      storage.requires_eject = true
      storage.serial = 'K0121B00357'
      storage.vendor = ''

      18: udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
      alsa.device_file = '/dev/snd/timer'
      alsa.type = 'timer'
      info.callouts.add = { 'hal-resmgr' }
      info.callouts.remove = { 'hal-resmgr' }
      info.capabilities = { 'alsa' }
      info.category = 'alsa'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'ALSA Timer Device'
      info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
      linux.device_file = '/dev/snd/timer'
      linux.hotplug_type = 2 (0x2)
      linux.subsystem = 'sound'
      linux.sysfs_path = '/sys/class/sound/timer'
      resmgr.class = 'sound'
      resmgr.device = '/dev/snd/timer'

      19: udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
      alsa.device_file = '/dev/snd/seq'
      alsa.type = 'sequencer'
      info.callouts.add = { 'hal-resmgr' }
      info.callouts.remove = { 'hal-resmgr' }
      info.capabilities = { 'alsa' }
      info.category = 'alsa'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'ALSA Sequencer Device'
      info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
      linux.device_file = '/dev/snd/seq'
      linux.hotplug_type = 2 (0x2)
      linux.subsystem = 'sound'
      linux.sysfs_path = '/sys/class/sound/seq'
      resmgr.class = 'sound'
      resmgr.device = '/dev/snd/seq'

      20: udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
      info.bus = 'platform'
      info.linux.driver = 'vesafb'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'Platform Device (vesafb.0)'
      info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'platform'
      linux.sysfs_path = '/sys/devices/platform/vesafb.0'
      linux.sysfs_path_device = '/sys/devices/platform/vesafb.0'
      platform.id = 'vesafb.0'

      21: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_0_Port'
      info.bus = 'serio'
      info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
      info.product = 'i8042 Aux-0 Port'
      info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_0_Port'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'serio'
      linux.sysfs_path = '/sys/devices/platform/i8042/serio0'
      linux.sysfs_path_device = '/sys/devices/platform/i8042/serio0'
      serio.description = 'i8042 Aux-0 Port'
      serio.id = 'serio0'

      22: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_1_Port'
      info.bus = 'serio'
      info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
      info.product = 'i8042 Aux-1 Port'
      info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_1_Port'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'serio'
      linux.sysfs_path = '/sys/devices/platform/i8042/serio1'
      linux.sysfs_path_device = '/sys/devices/platform/i8042/serio1'
      serio.description = 'i8042 Aux-1 Port'
      serio.id = 'serio1'

      23: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_2_Port'
      info.bus = 'serio'
      info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
      info.product = 'i8042 Aux-2 Port'
      info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_2_Port'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'serio'
      linux.sysfs_path = '/sys/devices/platform/i8042/serio2'
      linux.sysfs_path_device = '/sys/devices/platform/i8042/serio2'
      serio.description = 'i8042 Aux-2 Port'
      serio.id = 'serio2'

      24: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port_logicaldev_input'
      info.capabilities = { 'input', 'input.tablet' }
      info.category = 'input'
      info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port'
      info.product = 'SynPS/2 Synaptics TouchPad'
      info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port_logicaldev_input'
      input.device = '/dev/input/event2'
      input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port'
      input.product = 'SynPS/2 Synaptics TouchPad'
      linux.device_file = '/dev/input/event2'
      linux.hotplug_type = 2 (0x2)
      linux.subsystem = 'input'
      linux.sysfs_path = '/sys/class/input/input2/event2'

      25: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port'
      info.bus = 'serio'
      info.linux.driver = 'psmouse'
      info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
      info.product = 'i8042 Aux-3 Port'
      info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'serio'
      linux.sysfs_path = '/sys/devices/platform/i8042/serio3'
      linux.sysfs_path_device = '/sys/devices/platform/i8042/serio3'
      serio.description = 'i8042 Aux-3 Port'
      serio.id = 'serio3'

      26: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input'
      info.capabilities = { 'input', 'input.keyboard' }
      info.category = 'input'
      info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
      info.product = 'AT Translated Set 2 keyboard'
      info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input'
      input.device = '/dev/input/event0'
      input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
      input.product = 'AT Translated Set 2 keyboard'
      linux.device_file = '/dev/input/event0'
      linux.hotplug_type = 2 (0x2)
      linux.subsystem = 'input'
      linux.sysfs_path = '/sys/class/input/input0/event0'

      27: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
      info.bus = 'serio'
      info.linux.driver = 'atkbd'
      info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
      info.product = 'i8042 Kbd Port'
      info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'serio'
      linux.sysfs_path = '/sys/devices/platform/i8042/serio4'
      linux.sysfs_path_device = '/sys/devices/platform/i8042/serio4'
      serio.description = 'i8042 Kbd Port'
      serio.id = 'serio4'

      28: udi = '/org/freedesktop/Hal/devices/platform_i8042'
      info.bus = 'platform'
      info.linux.driver = 'i8042'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'Platform Device (i8042)'
      info.udi = '/org/freedesktop/Hal/devices/platform_i8042'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'platform'
      linux.sysfs_path = '/sys/devices/platform/i8042'
      linux.sysfs_path_device = '/sys/devices/platform/i8042'
      platform.id = 'i8042'

      29: udi = '/org/freedesktop/Hal/devices/platform_serial8250'
      info.bus = 'platform'
      info.linux.driver = 'serial8250'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'Platform Device (serial8250)'
      info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'platform'
      linux.sysfs_path = '/sys/devices/platform/serial8250'
      linux.sysfs_path_device = '/sys/devices/platform/serial8250'
      platform.id = 'serial8250'

      30: udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
      info.capabilities = { 'input' }
      info.category = 'input'
      info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'
      info.product = 'PC Speaker'
      info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
      input.device = '/dev/input/event1'
      input.physical_device = '/org/freedesktop/Hal/devices/platform_pcspkr'
      input.product = 'PC Speaker'
      linux.device_file = '/dev/input/event1'
      linux.hotplug_type = 2 (0x2)
      linux.subsystem = 'input'
      linux.sysfs_path = '/sys/class/input/input1/event1'

      31: udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
      info.bus = 'platform'
      info.linux.driver = 'pcspkr'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'Platform Device (pcspkr)'
      info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'platform'
      linux.sysfs_path = '/sys/devices/platform/pcspkr'
      linux.sysfs_path_device = '/sys/devices/platform/pcspkr'
      platform.id = 'pcspkr'

      32: udi = '/org/freedesktop/Hal/devices/pci_10de_2f7'
      info.bus = 'pci'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'C51 Host Bridge'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_2f7'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0'
      pci.device_class = 5 (0x5)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 0 (0x0)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
      pci.product = 'C51 Host Bridge'
      pci.product_id = 759 (0x2f7)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      33: udi = '/org/freedesktop/Hal/devices/pci_10de_2fa'
      info.bus = 'pci'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'C51 Memory Controller 0'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_2fa'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.1'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.1'
      pci.device_class = 5 (0x5)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 0 (0x0)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.1'
      pci.product = 'C51 Memory Controller 0'
      pci.product_id = 762 (0x2fa)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      34: udi = '/org/freedesktop/Hal/devices/pci_10de_2fe'
      info.bus = 'pci'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'C51 Memory Controller 1'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_2fe'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.2'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.2'
      pci.device_class = 5 (0x5)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 0 (0x0)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.2'
      pci.product = 'C51 Memory Controller 1'
      pci.product_id = 766 (0x2fe)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      35: udi = '/org/freedesktop/Hal/devices/pci_10de_2f8'
      info.bus = 'pci'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'C51 Memory Controller 5'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_2f8'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.3'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.3'
      pci.device_class = 5 (0x5)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 0 (0x0)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.3'
      pci.product = 'C51 Memory Controller 5'
      pci.product_id = 760 (0x2f8)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      36: udi = '/org/freedesktop/Hal/devices/pci_10de_2f9'
      info.bus = 'pci'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'C51 Memory Controller 4'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_2f9'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.4'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.4'
      pci.device_class = 5 (0x5)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 0 (0x0)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.4'
      pci.product = 'C51 Memory Controller 4'
      pci.product_id = 761 (0x2f9)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      37: udi = '/org/freedesktop/Hal/devices/pci_10de_2ff'
      info.bus = 'pci'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'C51 Host Bridge'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_2ff'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.5'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.5'
      pci.device_class = 5 (0x5)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 0 (0x0)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.5'
      pci.product = 'C51 Host Bridge'
      pci.product_id = 767 (0x2ff)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      38: udi = '/org/freedesktop/Hal/devices/pci_10de_27f'
      info.bus = 'pci'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'C51 Memory Controller 3'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_27f'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.6'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.6'
      pci.device_class = 5 (0x5)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 0 (0x0)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.6'
      pci.product = 'C51 Memory Controller 3'
      pci.product_id = 639 (0x27f)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      39: udi = '/org/freedesktop/Hal/devices/pci_10de_27e'
      info.bus = 'pci'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'C51 Memory Controller 2'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_27e'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.7'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.7'
      pci.device_class = 5 (0x5)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 0 (0x0)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.7'
      pci.product = 'C51 Memory Controller 2'
      pci.product_id = 638 (0x27e)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      40: udi = '/org/freedesktop/Hal/devices/pci_10ec_8168'
      info.bus = 'pci'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_2fd'
      info.product = 'Unknown (0x8168)'
      info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8168'
      info.vendor = 'Realtek Semiconductor Co., Ltd.'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0'
      pci.device_class = 2 (0x2)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 0 (0x0)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0'
      pci.product = 'Unknown (0x8168)'
      pci.product_id = 33128 (0x8168)
      pci.subsys_product = 'Unknown (0x11f5)'
      pci.subsys_product_id = 4597 (0x11f5)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'Realtek Semiconductor Co., Ltd.'
      pci.vendor_id = 4332 (0x10ec)

      41: udi = '/org/freedesktop/Hal/devices/pci_10de_2fd'
      info.bus = 'pci'
      info.linux.driver = 'pcieport-driver'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'C51 PCI Express Bridge'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_2fd'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0'
      pci.device_class = 6 (0x6)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 4 (0x4)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0'
      pci.product = 'C51 PCI Express Bridge'
      pci.product_id = 765 (0x2fd)
      pci.subsys_product = 'Unknown (0x0000)'
      pci.subsys_product_id = 0 (0x0)
      pci.subsys_vendor = 'Unknown (0x0000)'
      pci.subsys_vendor_id = 0 (0x0)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      42: udi = '/org/freedesktop/Hal/devices/pci_10de_1d7'
      info.bus = 'pci'
      info.linux.driver = 'nvidia'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_2fb'
      info.product = 'Unknown (0x01d7)'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_1d7'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0'
      pci.device_class = 3 (0x3)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 0 (0x0)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0'
      pci.product = 'Unknown (0x01d7)'
      pci.product_id = 471 (0x1d7)
      pci.subsys_product = 'Unknown (0x13a2)'
      pci.subsys_product_id = 5026 (0x13a2)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      43: udi = '/org/freedesktop/Hal/devices/pci_10de_2fb'
      info.bus = 'pci'
      info.linux.driver = 'pcieport-driver'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'C51 PCI Express Bridge'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_2fb'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:04.0'
      pci.device_class = 6 (0x6)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 4 (0x4)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0'
      pci.product = 'C51 PCI Express Bridge'
      pci.product_id = 763 (0x2fb)
      pci.subsys_product = 'Unknown (0x0000)'
      pci.subsys_product_id = 0 (0x0)
      pci.subsys_vendor = 'Unknown (0x0000)'
      pci.subsys_vendor_id = 0 (0x0)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      44: udi = '/org/freedesktop/Hal/devices/pci_10de_270'
      info.bus = 'pci'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'MCP51 Host Bridge'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_270'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:09.0'
      pci.device_class = 5 (0x5)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 0 (0x0)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0'
      pci.product = 'MCP51 Host Bridge'
      pci.product_id = 624 (0x270)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      45: udi = '/org/freedesktop/Hal/devices/pci_10de_260'
      info.bus = 'pci'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'MCP51 LPC Bridge'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_260'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0a.0'
      pci.device_class = 6 (0x6)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 1 (0x1)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0'
      pci.product = 'MCP51 LPC Bridge'
      pci.product_id = 608 (0x260)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      46: udi = '/org/freedesktop/Hal/devices/pci_10de_264'
      info.bus = 'pci'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'MCP51 SMBus'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_264'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.1'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0a.1'
      pci.device_class = 12 (0xc)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 5 (0x5)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.1'
      pci.product = 'MCP51 SMBus'
      pci.product_id = 612 (0x264)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      47: udi = '/org/freedesktop/Hal/devices/pci_10de_271'
      info.bus = 'pci'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'MCP51 PMU'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_271'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.3'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0a.3'
      pci.device_class = 11 (0xb)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 64 (0x40)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.3'
      pci.product = 'MCP51 PMU'
      pci.product_id = 625 (0x271)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      48: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_0_if0'
      info.bus = 'usb'
      info.linux.driver = 'hub'
      info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_0'
      info.product = 'USB Hub Interface'
      info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_0_if0'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'usb'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb1/1-0:1.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0b.0/usb1/1-0:1.0'
      usb.bus_number = 1 (0x1)
      usb.can_wake_up = true
      usb.configuration_value = 1 (0x1)
      usb.device_class = 9 (0x9)
      usb.device_protocol = 0 (0x0)
      usb.device_revision_bcd = 518 (0x206)
      usb.device_subclass = 0 (0x0)
      usb.interface.class = 9 (0x9)
      usb.interface.number = 0 (0x0)
      usb.interface.protocol = 0 (0x0)
      usb.interface.subclass = 0 (0x0)
      usb.is_self_powered = true
      usb.linux.device_number = 1 (0x1)
      usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb1/1-0:1.0'
      usb.max_power = 0 (0x0)
      usb.num_configurations = 1 (0x1)
      usb.num_interfaces = 1 (0x1)
      usb.num_ports = 8 (0x8)
      usb.product = 'USB Hub Interface'
      usb.product_id = 0 (0x0)
      usb.serial = '0000:00:0b.0'
      usb.speed_bcd = 4608 (0x1200)
      usb.vendor = 'Linux 2.6.16.21-0.25-smp ohci_hcd'
      usb.vendor_id = 0 (0x0)
      usb.version_bcd = 272 (0x110)

      49: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0_logicaldev_input'
      info.callouts.add = { 'hal-resmgr' }
      info.callouts.remove = { 'hal-resmgr' }
      info.capabilities = { 'input', 'input.mouse' }
      info.category = 'input'
      info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0'
      info.product = 'Logitech Optical USB Mouse'
      info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0_logicaldev_input'
      input.device = '/dev/input/event3'
      input.physical_device = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0'
      input.product = 'Logitech Optical USB Mouse'
      linux.device_file = '/dev/input/event3'
      linux.hotplug_type = 2 (0x2)
      linux.subsystem = 'input'
      linux.sysfs_path = '/sys/class/input/input3/event3'
      resmgr.class = 'input'
      resmgr.device = '/dev/input/event3'

      50: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0'
      info.bus = 'usb'
      info.linux.driver = 'usbhid'
      info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial'
      info.product = 'USB HID Interface'
      info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'usb'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb1/1-2/1-2:1.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0b.0/usb1/1-2/1-2:1.0'
      usb.bus_number = 1 (0x1)
      usb.can_wake_up = true
      usb.configuration_value = 1 (0x1)
      usb.device_class = 0 (0x0)
      usb.device_protocol = 0 (0x0)
      usb.device_revision_bcd = 832 (0x340)
      usb.device_subclass = 0 (0x0)
      usb.interface.class = 3 (0x3)
      usb.interface.number = 0 (0x0)
      usb.interface.protocol = 2 (0x2)
      usb.interface.subclass = 1 (0x1)
      usb.is_self_powered = false
      usb.linux.device_number = 2 (0x2)
      usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb1/1-2/1-2:1.0'
      usb.max_power = 100 (0x64)
      usb.num_configurations = 1 (0x1)
      usb.num_interfaces = 1 (0x1)
      usb.num_ports = 0 (0x0)
      usb.product = 'USB HID Interface'
      usb.product_id = 49174 (0xc016)
      usb.speed_bcd = 336 (0x150)
      usb.vendor = 'Logitech, Inc.'
      usb.vendor_id = 1133 (0x46d)
      usb.version_bcd = 512 (0x200)

      51: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_usbraw'
      info.capabilities = { 'usbraw' }
      info.category = 'usbraw'
      info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial'
      info.product = 'USB Raw Device Access'
      info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_usbraw'
      linux.device_file = '/dev/bus/usb/001/002'
      linux.hotplug_type = 2 (0x2)
      linux.subsystem = 'usb_device'
      linux.sysfs_path = '/sys/class/usb_device/usbdev1.2'
      usbraw.device = '/dev/bus/usb/001/002'

      52: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial'
      info.bus = 'usb_device'
      info.linux.driver = 'usb'
      info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_0'
      info.product = 'M-UV69a Optical Wheel Mouse'
      info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial'
      info.vendor = 'Logitech, Inc.'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'usb'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb1/1-2'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0b.0/usb1/1-2'
      usb_device.bus_number = 1 (0x1)
      usb_device.can_wake_up = true
      usb_device.configuration_value = 1 (0x1)
      usb_device.device_class = 0 (0x0)
      usb_device.device_protocol = 0 (0x0)
      usb_device.device_revision_bcd = 832 (0x340)
      usb_device.device_subclass = 0 (0x0)
      usb_device.is_self_powered = false
      usb_device.linux.device_number = 2 (0x2)
      usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb1/1-2'
      usb_device.max_power = 100 (0x64)
      usb_device.num_configurations = 1 (0x1)
      usb_device.num_interfaces = 1 (0x1)
      usb_device.num_ports = 0 (0x0)
      usb_device.product = 'M-UV69a Optical Wheel Mouse'
      usb_device.product_id = 49174 (0xc016)
      usb_device.speed_bcd = 336 (0x150)
      usb_device.vendor = 'Logitech, Inc.'
      usb_device.vendor_id = 1133 (0x46d)
      usb_device.version_bcd = 512 (0x200)

      53: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_0_usbraw'
      info.capabilities = { 'usbraw' }
      info.category = 'usbraw'
      info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_0'
      info.product = 'USB Raw Device Access'
      info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_0_usbraw'
      linux.device_file = '/dev/bus/usb/001/001'
      linux.hotplug_type = 2 (0x2)
      linux.subsystem = 'usb_device'
      linux.sysfs_path = '/sys/class/usb_device/usbdev1.1'
      usbraw.device = '/dev/bus/usb/001/001'

      54: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_0'
      info.bus = 'usb_device'
      info.linux.driver = 'usb'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_26d'
      info.product = 'OHCI Host Controller'
      info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_0'
      info.vendor = 'Linux 2.6.16.21-0.25-smp ohci_hcd'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'usb'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb1'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0b.0/usb1'
      usb_device.bus_number = 1 (0x1)
      usb_device.can_wake_up = true
      usb_device.configuration_value = 1 (0x1)
      usb_device.device_class = 9 (0x9)
      usb_device.device_protocol = 0 (0x0)
      usb_device.device_revision_bcd = 518 (0x206)
      usb_device.device_subclass = 0 (0x0)
      usb_device.is_self_powered = true
      usb_device.linux.device_number = 1 (0x1)
      usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0/usb1'
      usb_device.max_power = 0 (0x0)
      usb_device.num_configurations = 1 (0x1)
      usb_device.num_interfaces = 1 (0x1)
      usb_device.num_ports = 8 (0x8)
      usb_device.product = 'OHCI Host Controller'
      usb_device.product_id = 0 (0x0)
      usb_device.serial = '0000:00:0b.0'
      usb_device.speed_bcd = 4608 (0x1200)
      usb_device.vendor = 'Linux 2.6.16.21-0.25-smp ohci_hcd'
      usb_device.vendor_id = 0 (0x0)
      usb_device.version_bcd = 272 (0x110)

      55: udi = '/org/freedesktop/Hal/devices/pci_10de_26d'
      info.bus = 'pci'
      info.linux.driver = 'ohci_hcd'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'MCP51 USB Controller'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_26d'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0b.0'
      pci.device_class = 12 (0xc)
      pci.device_protocol = 16 (0x10)
      pci.device_subclass = 3 (0x3)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0'
      pci.product = 'MCP51 USB Controller'
      pci.product_id = 621 (0x26d)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      56: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_1_if0'
      info.bus = 'usb'
      info.linux.driver = 'hub'
      info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_1'
      info.product = 'USB Hub Interface'
      info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_1_if0'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'usb'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb2/2-0:1.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0b.1/usb2/2-0:1.0'
      usb.bus_number = 2 (0x2)
      usb.can_wake_up = false
      usb.configuration_value = 1 (0x1)
      usb.device_class = 9 (0x9)
      usb.device_protocol = 1 (0x1)
      usb.device_revision_bcd = 518 (0x206)
      usb.device_subclass = 0 (0x0)
      usb.interface.class = 9 (0x9)
      usb.interface.number = 0 (0x0)
      usb.interface.protocol = 0 (0x0)
      usb.interface.subclass = 0 (0x0)
      usb.is_self_powered = true
      usb.linux.device_number = 1 (0x1)
      usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb2/2-0:1.0'
      usb.max_power = 0 (0x0)
      usb.num_configurations = 1 (0x1)
      usb.num_interfaces = 1 (0x1)
      usb.num_ports = 8 (0x8)
      usb.product = 'USB Hub Interface'
      usb.product_id = 0 (0x0)
      usb.serial = '0000:00:0b.1'
      usb.speed_bcd = 294912 (0x48000)
      usb.vendor = 'Linux 2.6.16.21-0.25-smp ehci_hcd'
      usb.vendor_id = 0 (0x0)
      usb.version_bcd = 512 (0x200)

      57: udi = '/org/freedesktop/Hal/devices/usb_device_174f_a311_noserial_if0'
      info.bus = 'usb'
      info.parent = '/org/freedesktop/Hal/devices/usb_device_174f_a311_noserial'
      info.product = 'USB Vendor Specific Interface'
      info.udi = '/org/freedesktop/Hal/devices/usb_device_174f_a311_noserial_if0'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'usb'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb2/2-5/2-5:1.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0b.1/usb2/2-5/2-5:1.0'
      usb.bus_number = 2 (0x2)
      usb.can_wake_up = false
      usb.configuration_value = 1 (0x1)
      usb.device_class = 0 (0x0)
      usb.device_protocol = 0 (0x0)
      usb.device_revision_bcd = 5 (0x5)
      usb.device_subclass = 0 (0x0)
      usb.interface.class = 255 (0xff)
      usb.interface.number = 0 (0x0)
      usb.interface.protocol = 255 (0xff)
      usb.interface.subclass = 255 (0xff)
      usb.is_self_powered = false
      usb.linux.device_number = 3 (0x3)
      usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb2/2-5/2-5:1.0'
      usb.max_power = 500 (0x1f4)
      usb.num_configurations = 1 (0x1)
      usb.num_interfaces = 1 (0x1)
      usb.num_ports = 0 (0x0)
      usb.product = 'USB Vendor Specific Interface'
      usb.product_id = 41745 (0xa311)
      usb.speed_bcd = 294912 (0x48000)
      usb.vendor = 'Syntek'
      usb.vendor_id = 5967 (0x174f)
      usb.version_bcd = 512 (0x200)

      58: udi = '/org/freedesktop/Hal/devices/usb_device_174f_a311_noserial_usbraw'
      info.callouts.add = { 'hal-resmgr' }
      info.callouts.remove = { 'hal-resmgr' }
      info.capabilities = { 'usbraw' }
      info.category = 'usbraw'
      info.parent = '/org/freedesktop/Hal/devices/usb_device_174f_a311_noserial'
      info.product = 'USB Raw Device Access'
      info.udi = '/org/freedesktop/Hal/devices/usb_device_174f_a311_noserial_usbraw'
      linux.device_file = '/dev/bus/usb/002/003'
      linux.hotplug_type = 2 (0x2)
      linux.subsystem = 'usb_device'
      linux.sysfs_path = '/sys/class/usb_device/usbdev2.3'
      resmgr.class = 'scanner'
      resmgr.flags = { 'usb' }
      usbraw.device = '/dev/bus/usb/002/003'

      59: udi = '/org/freedesktop/Hal/devices/usb_device_174f_a311_noserial'
      info.bus = 'usb_device'
      info.linux.driver = 'usb'
      info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_1'
      info.product = 'USB2.0'
      info.udi = '/org/freedesktop/Hal/devices/usb_device_174f_a311_noserial'
      info.vendor = 'Syntek'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'usb'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb2/2-5'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0b.1/usb2/2-5'
      usb_device.bus_number = 2 (0x2)
      usb_device.can_wake_up = false
      usb_device.configuration_value = 1 (0x1)
      usb_device.device_class = 0 (0x0)
      usb_device.device_protocol = 0 (0x0)
      usb_device.device_revision_bcd = 5 (0x5)
      usb_device.device_subclass = 0 (0x0)
      usb_device.is_self_powered = false
      usb_device.linux.device_number = 3 (0x3)
      usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb2/2-5'
      usb_device.max_power = 500 (0x1f4)
      usb_device.num_configurations = 1 (0x1)
      usb_device.num_interfaces = 1 (0x1)
      usb_device.num_ports = 0 (0x0)
      usb_device.product = 'USB2.0'
      usb_device.product_id = 41745 (0xa311)
      usb_device.speed_bcd = 294912 (0x48000)
      usb_device.vendor = 'Syntek'
      usb_device.vendor_id = 5967 (0x174f)
      usb_device.version_bcd = 512 (0x200)

      60: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_1_usbraw'
      info.capabilities = { 'usbraw' }
      info.category = 'usbraw'
      info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_1'
      info.product = 'USB Raw Device Access'
      info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_1_usbraw'
      linux.device_file = '/dev/bus/usb/002/001'
      linux.hotplug_type = 2 (0x2)
      linux.subsystem = 'usb_device'
      linux.sysfs_path = '/sys/class/usb_device/usbdev2.1'
      usbraw.device = '/dev/bus/usb/002/001'

      61: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_1'
      info.bus = 'usb_device'
      info.linux.driver = 'usb'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_26e'
      info.product = 'EHCI Host Controller'
      info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0b_1'
      info.vendor = 'Linux 2.6.16.21-0.25-smp ehci_hcd'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'usb'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb2'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0b.1/usb2'
      usb_device.bus_number = 2 (0x2)
      usb_device.can_wake_up = false
      usb_device.configuration_value = 1 (0x1)
      usb_device.device_class = 9 (0x9)
      usb_device.device_protocol = 1 (0x1)
      usb_device.device_revision_bcd = 518 (0x206)
      usb_device.device_subclass = 0 (0x0)
      usb_device.is_self_powered = true
      usb_device.linux.device_number = 1 (0x1)
      usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1/usb2'
      usb_device.max_power = 0 (0x0)
      usb_device.num_configurations = 1 (0x1)
      usb_device.num_interfaces = 1 (0x1)
      usb_device.num_ports = 8 (0x8)
      usb_device.product = 'EHCI Host Controller'
      usb_device.product_id = 0 (0x0)
      usb_device.serial = '0000:00:0b.1'
      usb_device.speed_bcd = 294912 (0x48000)
      usb_device.vendor = 'Linux 2.6.16.21-0.25-smp ehci_hcd'
      usb_device.vendor_id = 0 (0x0)
      usb_device.version_bcd = 512 (0x200)

      62: udi = '/org/freedesktop/Hal/devices/pci_10de_26e'
      info.bus = 'pci'
      info.linux.driver = 'ehci_hcd'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'MCP51 USB Controller'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_26e'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0b.1'
      pci.device_class = 12 (0xc)
      pci.device_protocol = 32 (0x20)
      pci.device_subclass = 3 (0x3)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.1'
      pci.product = 'MCP51 USB Controller'
      pci.product_id = 622 (0x26e)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      63: udi = '/org/freedesktop/Hal/devices/pci_10de_265_ide_0_0'
      ide.channel = 0 (0x0)
      ide.host = 0 (0x0)
      info.bus = 'ide'
      info.linux.driver = 'ide-cdrom'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_265'
      info.product = 'IDE device (master)'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_265_ide_0_0'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'ide'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0/ide0/0.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0d.0/ide0/0.0'

      64: udi = '/org/freedesktop/Hal/devices/pci_10de_265_ide_1_0'
      ide.channel = 0 (0x0)
      ide.host = 1 (0x1)
      info.bus = 'ide'
      info.linux.driver = 'ide-disk'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_265'
      info.product = 'IDE device (master)'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_265_ide_1_0'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'ide'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0/ide1/1.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0d.0/ide1/1.0'

      65: udi = '/org/freedesktop/Hal/devices/pci_10de_265'
      info.bus = 'pci'
      info.linux.driver = 'AMD_IDE'
      info.parent = '/org/freedesktop/Hal/devices/computer'
      info.product = 'MCP51 IDE'
      info.udi = '/org/freedesktop/Hal/devices/pci_10de_265'
      info.vendor = 'nVidia Corporation'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0d.0'
      pci.device_class = 1 (0x1)
      pci.device_protocol = 138 (0x8a)
      pci.device_subclass = 1 (0x1)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0'
      pci.product = 'MCP51 IDE'
      pci.product_id = 613 (0x265)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'nVidia Corporation'
      pci.vendor_id = 4318 (0x10de)

      66: udi = '/org/freedesktop/Hal/devices/pci_1180_476'
      info.bus = 'pci'
      info.linux.driver = 'yenta_cardbus'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_26f'
      info.product = 'RL5c476 II'
      info.udi = '/org/freedesktop/Hal/devices/pci_1180_476'
      info.vendor = 'Ricoh Co Ltd'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/0000:03:01.0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.0/0000:03:01.0'
      pci.device_class = 6 (0x6)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 7 (0x7)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/0000:03:01.0'
      pci.product = 'RL5c476 II'
      pci.product_id = 1142 (0x476)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'Ricoh Co Ltd'
      pci.vendor_id = 4480 (0x1180)

      67: udi = '/org/freedesktop/Hal/devices/ieee1394_guid_e01800035fbf2d'
      ieee1394.guid = 63076783118860077ull (0xe01800035fbf2dull)
      ieee1394.product = 'Unknown (0x00e018)'
      ieee1394.product_id = 0 (0x0)
      ieee1394.specifier_id = 94 (0x5e)
      ieee1394.vendor = 'Unknown (0x00e018)'
      ieee1394.vendor_id = 57368 (0xe018)
      ieee1394.version = 1 (0x1)
      info.bus = 'ieee1394'
      info.parent = '/org/freedesktop/Hal/devices/pci_1180_552'
      info.product = 'Unknown (0x00e018)'
      info.udi = '/org/freedesktop/Hal/devices/ieee1394_guid_e01800035fbf2d'
      info.vendor = 'Unknown (0x00e018)'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'ieee1394'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/0000:03:01.1/fw-host0/00e01800035fbf2d/00e01800035fbf2d-0'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.0/0000:03:01.1/fw-host0/00e01800035fbf2d/00e01800035fbf2d-0'

      68: udi = '/org/freedesktop/Hal/devices/pci_1180_552'
      info.bus = 'pci'
      info.linux.driver = 'ohci1394'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_26f'
      info.product = 'R5C552 IEEE 1394 Controller'
      info.udi = '/org/freedesktop/Hal/devices/pci_1180_552'
      info.vendor = 'Ricoh Co Ltd'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/0000:03:01.1'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.0/0000:03:01.1'
      pci.device_class = 12 (0xc)
      pci.device_protocol = 16 (0x10)
      pci.device_subclass = 0 (0x0)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/0000:03:01.1'
      pci.product = 'R5C552 IEEE 1394 Controller'
      pci.product_id = 1362 (0x552)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'Ricoh Co Ltd'
      pci.vendor_id = 4480 (0x1180)

      69: udi = '/org/freedesktop/Hal/devices/pci_1180_822'
      info.bus = 'pci'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_26f'
      info.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter'
      info.udi = '/org/freedesktop/Hal/devices/pci_1180_822'
      info.vendor = 'Ricoh Co Ltd'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/0000:03:01.2'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.0/0000:03:01.2'
      pci.device_class = 8 (0x8)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 5 (0x5)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/0000:03:01.2'
      pci.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter'
      pci.product_id = 2082 (0x822)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'Ricoh Co Ltd'
      pci.vendor_id = 4480 (0x1180)

      70: udi = '/org/freedesktop/Hal/devices/pci_1180_592'
      info.bus = 'pci'
      info.parent = '/org/freedesktop/Hal/devices/pci_10de_26f'
      info.product = 'R5C592 Memory Stick Bus Host Adapter'
      info.udi = '/org/freedesktop/Hal/devices/pci_1180_592'
      info.vendor = 'Ricoh Co Ltd'
      linux.hotplug_type = 1 (0x1)
      linux.subsystem = 'pci'
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/0000:03:01.3'
      linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.0/0000:03:01.3'
      pci.device_class = 8 (0x8)
      pci.device_protocol = 0 (0x0)
      pci.device_subclass = 128 (0x80)
      pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/0000:03:01.3'
      pci.product = 'R5C592 Memory Stick Bus Host Adapter'
      pci.product_id = 1426 (0x592)
      pci.subsys_product = 'Unknown (0x1367)'
      pci.subsys_product_id = 4967 (0x1367)
      pci.subsys_vendor = 'ASUSTeK Computer Inc.'
      pci.subsys_vendor_id = 4163 (0x1043)
      pci.vendor = 'Ricoh Co Ltd'
      pci.vendor_id = 4480 (0x1180)

      71: udi = '/org/freedesktop/Hal/devices/net_00

      Äänestä

    • ohjeiden mukaan uusinta v1.04 ajuria, mutta antaa seuraavan herjan

      turionx2:/home/pöllöpää/Eth0_ajurit/r1000_v1.04 # make clean modules
      make -C src/ clean
      make[1]: Entering directory `/home/pöllöpää/Eth0_ajurit/r1000_v1.04/src'
      rm -f *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags
      make[1]: Leaving directory `/home/pöllöpää/Eth0_ajurit/r1000_v1.04/src'
      make -C src/ modules
      make[1]: Entering directory `/home/pöllöpää/Eth0_ajurit/r1000_v1.04/src'
      make -C /lib/modules/2.6.16.21-0.25-smp/build SUBDIRS=/home/pöllöpää/Eth0_ajurit/r1000_v1.04/src modules
      make[2]: Entering directory `/usr/src/linux-2.6.16.21-0.25-obj/x86_64/smp'
      make -C ../../../linux-2.6.16.21-0.25 O=../linux-2.6.16.21-0.25-obj/x86_64/smp modules
      /home/pöllöpää/Eth0_ajurit/r1000_v1.04/src/Makefile:28: /usr/src/linux-2.6.16.21-0.25/src/Makefile_linux26x: No such file or directory
      make[5]: *** No rule to make target `/usr/src/linux-2.6.16.21-0.25/src/Makefile_linux26x'. Stop.
      make[4]: *** [_module_/home/pöllöpää/Eth0_ajurit/r1000_v1.04/src] Error 2
      make[3]: *** [modules] Error 2
      make[2]: *** [modules] Error 2
      make[2]: Leaving directory `/usr/src/linux-2.6.16.21-0.25-obj/x86_64/smp'
      make[1]: *** [modules] Error 2
      make[1]: Leaving directory `/home/pöllöpää/Eth0_ajurit/r1000_v1.04/src'
      make: *** [modules] Error 2

      pää solmussa tällä hetkellä. Ei juokse ajatus.

      Äänestä

    • ja yritin asentaa kirjoitti:

      ohjeiden mukaan uusinta v1.04 ajuria, mutta antaa seuraavan herjan

      turionx2:/home/pöllöpää/Eth0_ajurit/r1000_v1.04 # make clean modules
      make -C src/ clean
      make[1]: Entering directory `/home/pöllöpää/Eth0_ajurit/r1000_v1.04/src'
      rm -f *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags
      make[1]: Leaving directory `/home/pöllöpää/Eth0_ajurit/r1000_v1.04/src'
      make -C src/ modules
      make[1]: Entering directory `/home/pöllöpää/Eth0_ajurit/r1000_v1.04/src'
      make -C /lib/modules/2.6.16.21-0.25-smp/build SUBDIRS=/home/pöllöpää/Eth0_ajurit/r1000_v1.04/src modules
      make[2]: Entering directory `/usr/src/linux-2.6.16.21-0.25-obj/x86_64/smp'
      make -C ../../../linux-2.6.16.21-0.25 O=../linux-2.6.16.21-0.25-obj/x86_64/smp modules
      /home/pöllöpää/Eth0_ajurit/r1000_v1.04/src/Makefile:28: /usr/src/linux-2.6.16.21-0.25/src/Makefile_linux26x: No such file or directory
      make[5]: *** No rule to make target `/usr/src/linux-2.6.16.21-0.25/src/Makefile_linux26x'. Stop.
      make[4]: *** [_module_/home/pöllöpää/Eth0_ajurit/r1000_v1.04/src] Error 2
      make[3]: *** [modules] Error 2
      make[2]: *** [modules] Error 2
      make[2]: Leaving directory `/usr/src/linux-2.6.16.21-0.25-obj/x86_64/smp'
      make[1]: *** [modules] Error 2
      make[1]: Leaving directory `/home/pöllöpää/Eth0_ajurit/r1000_v1.04/src'
      make: *** [modules] Error 2

      pää solmussa tällä hetkellä. Ei juokse ajatus.

      "ohjeiden mukaan uusinta v1.04 ajuria,"

      Tuon ohjeen mukaan siis vanhempi versio kääntyy?
      Mutta oletko, ennen ajurin noutamista ja kääntämisyritystä, tarkistanut, ettei ko. moduli olisi jo tarjolla SuSE:ssa.
      SuSE:ssa on yleensä aika kattavasti ajureita.

      Eiköhän tuo kääntäminen katkea virheeseen:
      "/usr/src/linux-2.6.16.21-0.25/src/Makefile_linux26x: No such file or directory "

      Äänestä

    • lsmod... kirjoitti:

      "ohjeiden mukaan uusinta v1.04 ajuria,"

      Tuon ohjeen mukaan siis vanhempi versio kääntyy?
      Mutta oletko, ennen ajurin noutamista ja kääntämisyritystä, tarkistanut, ettei ko. moduli olisi jo tarjolla SuSE:ssa.
      SuSE:ssa on yleensä aika kattavasti ajureita.

      Eiköhän tuo kääntäminen katkea virheeseen:
      "/usr/src/linux-2.6.16.21-0.25/src/Makefile_linux26x: No such file or directory "

      piti vaan siitä puretusta ajuripaketista kopioda tuo src hakemisto tonne , mistä virhettä herjaa. Ja sitten loppu olikin helppoa.
      make clean modules
      make install
      depmod -a
      niin ja ennen tota piti yhtä tiedostoo muuttaa(r1000_n.c) - riville 51-53 piti lisätä DESC--näin MODULE_PARM_DESC jne jne.

      Äänestä

    Odottaa vastausta

    Näihin keskusteluihin ei ole vielä vastattu. Ole ensimmäinen.

    Luetuimmat keskustelut

    Kommentoi aloitusta

    verkkokortin kirjoitti:

    suse 10.1ssä toimimaan.
    Tältä näyttää lspci:n rivi
    01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Unknown device 8168 (rev 01)
    ja yast-network devices-network card
    näkee sen myös.
    Mutta kun yritän ajaa sen ylös sanoo vaan
    eth0: unknown interface: No such device

    Anonyymi
    5000

    Ilmoita asiaton sisältö

    • Sisältää materiaalia, joka on loukkaavaa, herjaavaa, rasistista, uhkailevaa tai ahdistelevaa.

    • Materiaali sisältää nimiä, yhteystietoja tai muita henkilökohtaisia tietoja. Julkisuuden henkilöistä, julkisissa viroissa toimivista ihmisistä sekä yritysten vastuuhenkilöistä saa keskustella työhön liittyen. Myös yksityiselämään liittyvistä asioista voi keskustella siltä osin, kuin niistä on julkisesti kerrottu.

    • Sisältää lapsille haitallista tai heiltä kiellettyä materiaalia. Seksuaalinen sisältö on sallittua aiheeseen tarkoitetuilla palstoilla, joiden ikäraja on 18 vuotta.

    • Lainvastaista sisältöä voi olla mm. yksityiselämää loukkaavan tiedon levitys, kiihottaminen kansanryhmää vastaan, laiton uhkaaminen, alaikäisiin liittyvä seksuaalinen sisältö/grooming, petokset, identiteettivarkaudet, kunnianloukkaukset ja tekijänoikeusrikkomukset.

    • Sisältö ei liity palstan tai keskusteluketjun aiheeseen.

    • Viesti ei ole suomea tai ruotsia (pl. International Forums), se sisältää mainontaa, se sisältää tekijänoikeuksin suojattua materiaalia, se on massapostitus tai jokin muu syy.

    Jaa keskustelu