Kiintolevy hukassa?

Ekasta:
CPU 0 attaching NULL schead-domain
CPU 1 attaching NULL schead-domain
CPU 0 attaching NULL schead-domain:
domain 0: span 0-1
level CPU groups: 01

Tokasta:
Usage:
fdisk [-b SSZ] [-u] DISK Change partition table
fdisk -l [-b SSZ] [-u] disk List partition table(s)
fdisk -s PARTITION Give partition size(s) in bl(ja sitten jäi valokuvasta poijes...)
fdisk -v Give fdisk version

Ja näiden jälkeen tuli jotain ohjeita. Pitää kyllä olla aika viisas, jos noista ymmärtää mitään :) Sano jos jotain tärkeää jäi puuttumaan niin katon uudelleen.

Eetu95 kirjoitti:

Ekasta:
CPU 0 attaching NULL schead-domain
CPU 1 attaching NULL schead-domain
CPU 0 attaching NULL schead-domain:
domain 0: span 0-1
level CPU groups: 01

Tokasta:
Usage:
fdisk [-b SSZ] [-u] DISK Change partition table
fdisk -l [-b SSZ] [-u] disk List partition table(s)
fdisk -s PARTITION Give partition size(s) in bl(ja sitten jäi valokuvasta poijes...)
fdisk -v Give fdisk version

Ja näiden jälkeen tuli jotain ohjeita. Pitää kyllä olla aika viisas, jos noista ymmärtää mitään :) Sano jos jotain tärkeää jäi puuttumaan niin katon uudelleen.

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-19) ([email protected]) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Aug 19 22:33:18 UTC 2009
[ 0.000000] Command line: root=/dev/mapper/sala-juuri ro vga=792 quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
[ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 851824) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200 used
[ 0.000000] max_pfn_mapped = 2293760
[ 0.000000] init_memory_mapping
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000FAFF0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT CFF70000, 0040 (r1 A_M_I_ OEMRSDT 4000906 MSFT 97)
[ 0.000000] ACPI: FACP CFF70200, 0084 (r2 A_M_I_ OEMFACP 4000906 MSFT 97)
[ 0.000000] ACPI: DSDT CFF70440, 9721 (r1 A0986 A0986000 0 INTL 20060113)
[ 0.000000] ACPI: FACS CFF7E000, 0040
[ 0.000000] ACPI: APIC CFF70390, 006C (r1 A_M_I_ OEMAPIC 4000906 MSFT 97)
[ 0.000000] ACPI: MCFG CFF70400, 003C (r1 A_M_I_ OEMMCFG 4000906 MSFT 97)
[ 0.000000] ACPI: OEMB CFF7E040, 0089 (r1 A_M_I_ AMI_OEM 4000906 MSFT 97)
[ 0.000000] ACPI: HPET CFF79B70, 0038 (r1 A_M_I_ OEMHPET 4000906 MSFT 97)
[ 0.000000] ACPI: OSFR CFF79BB0, 00B0 (r1 A_M_I_ OEMOSFR 4000906 MSFT 97)
[ 0.000000] ACPI: SSDT CFF7E5D0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20060113)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 851824) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff]
[ 0.000000] bootmap [0000000000017000 - 000000000005cfff] pages 46
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS
[ 0.000000] early res: 3 [37860000-37fef753] RAMDISK
[ 0.000000] early res: 4 [9ec00-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-11fff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0
[ 0.000000] [ffffe20003800000-ffffe20007bfffff] PMD -> [ffff81000c000000-ffff8100103fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 2293760
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 158
[ 0.000000] 0: 256 -> 851824
[ 0.000000] 0: 1048576 -> 2293760
[ 0.000000] On node 0 totalpages: 2096910
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1253 pages reserved
[ 0.000000] DMA zone: 2689 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833448 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff70000 - 00000000cff7e000
[ 0.000000] PM: Registered nosave memory: 00000000cff7e000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064297
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/sala-juuri ro vga=792 quiet
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] time.c: Detected 2999.671 MHz processor.
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x4000000 - 0x8000000
[ 0.004000] Memory: 8192108k/9175040k available (2228k kernel code, 195532k reserved, 1081k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083909] Calibrating delay using timer specific routine.. 6003.33 BogoMIPS (lpj=12006664)
[ 0.083939] Security Framework initialized
[ 0.083943] SELinux: Disabled at boot.
[ 0.083945] Capability LSM initialized
[ 0.084005] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.084005] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.085502] Mount-cache hash table entries: 256
[ 0.085620] Initializing cgroup subsys ns
[ 0.085622] Initializing cgroup subsys cpuacct
[ 0.085624] Initializing cgroup subsys devices
[ 0.085640] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.085641] CPU: L2 cache: 6144K
[ 0.085643] CPU 0/0 -> Node 0
[ 0.085644] CPU: Physical Processor ID: 0
[ 0.085645] CPU: Processor Core ID: 0
[ 0.085650] CPU0: Thermal monitoring enabled (TM2)
[ 0.085651] using mwait in idle threads.
[ 0.086369] ACPI: Core revision 20080321
[ 0.144009] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
[ 0.144009] Using local APIC timer interrupts.
[ 0.148009] APIC timer calibration result 20831050
[ 0.148009] Detected 20.831 MHz APIC timer.
[ 0.148009] Booting processor 1/1 ip 6000
[ 0.156009] Initializing CPU#1
[ 0.156009] Calibrating delay using timer specific routine.. 5999.38 BogoMIPS (lpj=11998766)
[ 0.156009] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.156009] CPU: L2 cache: 6144K
[ 0.156009] CPU 1/1 -> Node 0
[ 0.156009] CPU: Physical Processor ID: 0
[ 0.156009] CPU: Processor Core ID: 1
[ 0.156009] CPU1: Thermal monitoring enabled (TM2)
[ 0.236014] CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
[ 0.236014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.240015] Brought up 2 CPUs
[ 0.240015] Total of 2 processors activated (12002.71 BogoMIPS).
[ 0.240015] CPU0 attaching sched-domain:
[ 0.240015] domain 0: span 0-1
[ 0.240015] groups: 0 1
[ 0.240015] domain 1: span 0-1
[ 0.240015] groups: 0-1
[ 0.240015] CPU1 attaching sched-domain:
[ 0.240015] domain 0: span 0-1
[ 0.240015] groups: 1 0
[ 0.240015] domain 1: span 0-1
[ 0.240015] groups: 0-1
[ 0.240015] net_namespace: 1224 bytes
[ 0.240015] Booting paravirtualized kernel on bare hardware
[ 0.240015] NET: Registered protocol family 16
[ 0.240015] ACPI: bus type pci registered
[ 0.240015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.240015] PCI: Not using MMCONFIG.
[ 0.240015] PCI: Using configuration type 1 for base access
[ 0.240015] ACPI: EC: Look up EC in DSDT
[ 0.252015] ACPI: Interpreter enabled
[ 0.252015] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.252015] ACPI: Using IOAPIC for interrupt routing
[ 0.252015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.254349] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.263521] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.272017] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.272017] PCI: Transparent bridge - 0000:00:1e.0
[ 0.272017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.272017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.272017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.272017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.272017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.288018] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.288018] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.288018] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.288018] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.288018] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.288018] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.288018] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.288018] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.288018] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - F3, should be F2 [20080321]
[ 0.288018] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.288018] pnp: PnP ACPI init
[ 0.288018] ACPI: bus type pnp registered
[ 0.288018] pnp 00:00: parse allocated resources
[ 0.288018] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.288018] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.288018] pnp 00:01: parse allocated resources
[ 0.288018] pnp 00:01: add mem 0xfed14000-0xfed19fff flags 0x1
[ 0.288018] pnp 00:01: PNP0c01: calling quirk_system_pci_resources 0x0/0x15c
[ 0.288018] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.288018] pnp 00:02: parse allocated resources
[ 0.288018] pnp 00:02: add dma 4 flags 0x4
[ 0.288018] pnp 00:02: add io 0x0-0xf flags 0x1
[ 0.288018] pnp 00:02: add io 0x81-0x83 flags 0x1
[ 0.288018] pnp 00:02: add io 0x87-0x87 flags 0x1
[ 0.288018] pnp 00:02: add io 0x89-0x8b flags 0x1
[ 0.288018] pnp 00:02: add io 0x8f-0x8f flags 0x1
[ 0.288018] pnp 00:02: add io 0xc0-0xdf flags 0x1
[ 0.288018] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.288018] pnp 00:03: parse allocated resources
[ 0.288018] pnp 00:03: add io 0x70-0x71 flags 0x1
[ 0.288018] pnp 00:03: add irq 8 flags 0x1
[ 0.288018] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.288018] pnp 00:04: parse allocated resources
[ 0.288018] pnp 00:04: add io 0x61-0x61 flags 0x1
[ 0.288018] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.288018] pnp 00:05: parse allocated resources
[ 0.288018] pnp 00:05: add io 0xf0-0xff flags 0x1
[ 0.288018] pnp 00:05: add irq 13 flags 0x1
[ 0.288018] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.288018] pnp 00:06: parse allocated resources
[ 0.288018] pnp 00:06: add io 0x0-0xffffffffffffffff flags 0x10000001
[ 0.288018] pnp 00:06: add io 0x0-0xffffffffffffffff flags 0x10000001
[ 0.288018] pnp 00:06: add io 0x290-0x29f flags 0x1
[ 0.288018] pnp 00:06: PNP0c02: calling quirk_system_pci_resources 0x0/0x15c
[ 0.288018] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.288018] pnp 00:07: parse allocated resources
[ 0.288018] pnp 00:07: add io 0x10-0x1f flags 0x1
[ 0.288018] pnp 00:07: add io 0x22-0x3f flags 0x1
[ 0.288018] pnp 00:07: add io 0x44-0x4d flags 0x1
[ 0.288018] pnp 00:07: add io 0x50-0x5f flags 0x1
[ 0.288018] pnp 00:07: add io 0x62-0x63 flags 0x1
[ 0.288018] pnp 00:07: add io 0x65-0x6f flags 0x1
[ 0.288018] pnp 00:07: add io 0x72-0x7f flags 0x1
[ 0.288018] pnp 00:07: add io 0x80-0x80 flags 0x1
[ 0.288018] pnp 00:07: add io 0x84-0x86 flags 0x1
[ 0.288018] pnp 00:07: add io 0x88-0x88 flags 0x1
[ 0.288018] pnp 00:07: add io 0x8c-0x8e flags 0x1
[ 0.288018] pnp 00:07: add io 0x90-0x9f flags 0x1
[ 0.288018] pnp 00:07: add io 0xa2-0xbf flags 0x1
[ 0.288018] pnp 00:07: add io 0xe0-0xef flags 0x1
[ 0.288018] pnp 00:07: add io 0x4d0-0x4d1 flags 0x1
[ 0.288018] pnp 00:07: add io 0x800-0x87f flags 0x1
[ 0.288018] pnp 00:07: add io 0x400-0x3ff flags 0x10000001
[ 0.288018] pnp 00:07: add io 0x500-0x57f flags 0x1
[ 0.288018] pnp 00:07: add mem 0xfed08000-0xfed08fff flags 0x1
[ 0.288018] pnp 00:07: add mem 0xfed1c000-0xfed1ffff flags 0x1
[ 0.288018] pnp 00:07: add mem 0xfed20000-0xfed3ffff flags 0x1
[ 0.288018] pnp 00:07: add mem 0xfed50000-0xfed8ffff flags 0x1
[ 0.288018] pnp 00:07: PNP0c02: calling quirk_system_pci_resources 0x0/0x15c
[ 0.288018] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.288018] pnp 00:08: parse allocated resources
[ 0.288018] pnp 00:08: add mem 0xfed00000-0xfed003ff flags 0x0
[ 0.288018] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.288018] pnp 00:09: parse allocated resources
[ 0.288018] pnp 00:09: add mem 0xffa00000-0xffbfffff flags 0x0
[ 0.288018] pnp 00:09: add mem 0xffe00000-0xffffffff flags 0x0
[ 0.288018] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.288018] pnp 00:0a: parse allocated resources
[ 0.288018] pnp 00:0a: add mem 0xffc00000-0xffdfffff flags 0x0
[ 0.288018] pnp 00:0a: PNP0c02: calling quirk_system_pci_resources 0x0/0x15c
[ 0.288018] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.288018] pnp 00:0b: parse allocated resources
[ 0.288018] pnp 00:0b: add io 0x3f8-0x3ff flags 0x1
[ 0.288018] pnp 00:0b: add irq 4 flags 0x1
[ 0.288018] pnp 00:0b: parse resource options
[ 0.288018] pnp 00:0b: new independent option
[ 0.288018] pnp 00:0b: new dependent option (priority 0x0)
[ 0.288018] pnp 00:0b: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.288018] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.288018] pnp 00:0b: new dependent option (priority 0x1)
[ 0.288018] pnp 00:0b: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.288018] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.288018] pnp 00:0b: new dependent option (priority 0x1)
[ 0.288018] pnp 00:0b: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.288018] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.288018] pnp 00:0b: new dependent option (priority 0x1)
[ 0.288018] pnp 00:0b: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.288018] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.288018] pnp 00:0b: new dependent option (priority 0x1)
[ 0.288018] pnp 00:0b: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.288018] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.288018] pnp 00:0b: end dependent options
[ 0.288018] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.288018] pnp 00:0c: parse allocated resources
[ 0.288018] pnp 00:0c: add io 0x0-0xffffffffffffffff flags 0x10000001
[ 0.288018] pnp 00:0c: add io 0x0-0xffffffffffffffff flags 0x10000001
[ 0.288018] pnp 00:0c: add mem 0xfec00000-0xfec00fff flags 0x0
[ 0.288018] pnp 00:0c: add mem 0xfee00000-0xfee00fff flags 0x0
[ 0.288018] pnp 00:0c: PNP0c02: calling quirk_system_pci_resources 0x0/0x15c
[ 0.288018] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.288018] pnp 00:0d: parse allocated resources
[ 0.288018] pnp 00:0d: add io 0x60-0x60 flags 0x1
[ 0.288018] pnp 00:0d: add io 0x64-0x64 flags 0x1
[ 0.288018] pnp 00:0d: add irq 1 flags 0x1
[ 0.288018] pnp 00:0d: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.288018] pnp 00:0e: parse allocated resources
[ 0.288018] pnp 00:0e: add mem 0xe0000000-0xefffffff flags 0x0
[ 0.288018] pnp 00:0e: PNP0c02: calling quirk_system_pci_resources 0x0/0x15c
[ 0.288018] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.288018] pnp 00:0f: parse allocated resources
[ 0.288199] pnp 00:0f: add mem 0x0-0x9ffff flags 0x1
[ 0.288201] pnp 00:0f: add mem 0xc0000-0xcffff flags 0x0
[ 0.288202] pnp 00:0f: add mem 0xe0000-0xfffff flags 0x0
[ 0.288203] pnp 00:0f: add mem 0x100000-0xcfffffff flags 0x1
[ 0.288205] pnp 00:0f: add mem 0xe0000000-0xffffffff flags 0x0
[ 0.288207] pnp 00:0f: PNP0c01: calling quirk_system_pci_resources 0x0/0x15c
[ 0.292018] pnp 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.292018] pnp: PnP ACPI: found 16 devices
[ 0.292018] ACPI: ACPI bus type pnp unregistered
[ 0.292018] usbcore: registered new interface driver usbfs
[ 0.292018] usbcore: registered new interface driver hub
[ 0.292018] usbcore: registered new device driver usb
[ 0.292018] PCI: Using ACPI for IRQ routing
[ 0.311275] PCI-GART: No AMD northbridge found.
[ 0.311280] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.311284] hpet0: 4 64-bit timers, 14318180 Hz
[ 0.312019] ACPI: RTC can wake from S4
[ 0.322950] pnp: the driver 'system' has been registered
[ 0.322960] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.322962] system 00:01: driver attached
[ 0.322969] system 00:06: ioport range 0x290-0x29f has been reserved
[ 0.322971] system 00:06: driver attached
[ 0.322976] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.322979] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.322981] system 00:07: ioport range 0x500-0x57f has been reserved
[ 0.322984] system 00:07: iomem range 0xfed08000-0xfed08fff has been reserved
[ 0.322987] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.322989] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.322992] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.322994] system 00:07: driver attached
[ 0.323000] system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved
[ 0.323002] system 00:0a: driver attached
[ 0.323007] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.323010] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.323012] system 00:0c: driver attached
[ 0.323017] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.323019] system 00:0e: driver attached
[ 0.323025] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.323027] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 0.323030] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.323032] system 00:0f: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.323035] system 00:0f: iomem range 0xe0000000-0xffffffff could not be reserved
[ 0.323037] system 00:0f: driver attached
[ 0.324020] PCI: Bridge: 0000:00:01.0
[ 0.324020] IO window: c000-cfff
[ 0.324020] MEM window: 0xfa000000-0xfe9fffff
[ 0.324020] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.324020] PCI: Bridge: 0000:00:1c.0
[ 0.324020] IO window: disabled.
[ 0.324020] MEM window: disabled.
[ 0.324020] PREFETCH window: 0x00000000f8f00000-0x00000000f8ffffff
[ 0.324020] PCI: Bridge: 0000:00:1c.5
[ 0.324020] IO window: d000-dfff
[ 0.324020] MEM window: 0xfea00000-0xfeafffff
[ 0.324020] PREFETCH window: disabled.
[ 0.324020] PCI: Bridge: 0000:00:1e.0
[ 0.324020] IO window: e000-efff
[ 0.324020] MEM window: 0xfeb00000-0xfebfffff
[ 0.324020] PREFETCH window: 0x00000000f0000000-0x00000000f00fffff
[ 0.324020] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.324020] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.324020] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.324020] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.324020] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.324020] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.324020] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.324020] NET: Registered protocol family 2
[ 0.359706] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.360759] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.360759] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.360759] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.360759] TCP reno registered
[ 0.372866] NET: Registered protocol family 1
[ 0.372944] checking if image is initramfs...Switched to high resolution mode on CPU 1
[ 0.504762] Switched to high resolution mode on CPU 0
[ 0.584736] it is
[ 0.808176] Freeing initrd memory: 7741k freed
[ 0.808501] audit: initializing netlink socket (disabled)
[ 0.808501] type=2000 audit(1252380591.800:1): initialized
[ 0.808501] Total HugeTLB memory allocated, 0
[ 0.808527] VFS: Disk quotas dquot_6.5.1
[ 0.808527] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.808527] msgmni has been set to 16015
[ 0.808527] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.808527] io scheduler noop registered
[ 0.808527] io scheduler anticipatory registered
[ 0.808527] io scheduler deadline registered
[ 0.808527] io scheduler cfq registered (default)
[ 0.808527] pci 0000:01:00.0: Boot video device
[ 0.808527] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.808527] assign_interrupt_mode Found MSI capability
[ 0.808527] Allocate Port Service[0000:00:01.0:pcie00]
[ 0.808527] Allocate Port Service[0000:00:01.0:pcie03]
[ 0.808527] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.808527] assign_interrupt_mode Found MSI capability
[ 0.808527] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.808527] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.809536] Allocate Port Service[0000:00:1c.0:pcie03]
[ 0.810582] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.810604] assign_interrupt_mode Found MSI capability
[ 0.810626] Allocate Port Service[0000:00:1c.5:pcie00]
[ 0.811639] Allocate Port Service[0000:00:1c.5:pcie02]
[ 0.812501] Allocate Port Service[0000:00:1c.5:pcie03]
[ 0.812501] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc20011800000, using 6144k, total 14336k
[ 0.812501] vesafb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.812501] vesafb: scrolling: redraw
[ 0.812501] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.832246] Console: switching to colour frame buffer device 128x48
[ 0.851426] fb0: VESA VGA frame buffer device
[ 0.854068] hpet_resources: 0xfed00000 is busy
[ 0.854068] Linux agpgart interface v0.103
[ 0.854068] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.854068] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.854068] pnp: the driver 'serial' has been registered
[ 0.854068] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.854068] serial 00:0b: driver attached
[ 0.854069] brd: module loaded
[ 0.854069] input: Macintosh mouse button emulation as /class/input/input0
[ 0.854069] pnp: the driver 'i8042 kbd' has been registered
[ 0.854069] i8042 kbd 00:0d: driver attached
[ 0.854069] pnp: the driver 'i8042 aux' has been registered
[ 0.854069] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.854069] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.854406] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.871733] mice: PS/2 mouse device common for all mice
[ 0.872765] pnp: the driver 'rtc_cmos' has been registered
[ 0.873352] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.873352] rtc0: alarms up to one month, y3k
[ 0.873352] rtc_cmos 00:03: driver attached
[ 0.873352] cpuidle: using governor ladder
[ 0.873352] cpuidle: using governor menu
[ 0.873352] No iBFT detected.
[ 0.873352] TCP cubic registered
[ 0.873352] NET: Registered protocol family 17
[ 0.873352] registered taskstats version 1
[ 0.873352] rtc_cmos 00:03: setting system clock to 2009-09-08 03:29:52 UTC (1252380592)
[ 0.873352] Freeing unused kernel memory: 392k freed
[ 0.898126] input: AT Translated Set 2 keyboard as /class/input/input1
[ 0.927049] No dock devices found.
[ 0.931049] SCSI subsystem initialized
[ 0.935049] libata version 3.00 loaded.
[ 0.938537] ahci 0000:00:1f.2: version 3.0
[ 0.938537] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.938568] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.938571] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part
[ 1.938576] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1.942537] scsi0 : ahci
[ 1.942537] scsi1 : ahci
[ 1.942537] scsi2 : ahci
[ 1.942537] scsi3 : ahci
[ 1.942537] scsi4 : ahci
[ 1.942537] scsi5 : ahci
[ 1.942537] ata1: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe900 irq 1276
[ 1.942537] ata2: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe980 irq 1276
[ 1.942537] ata3: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea00 irq 1276
[ 1.942537] ata4: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea80 irq 1276
[ 1.942537] ata5: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb00 irq 1276
[ 1.942537] ata6: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb80 irq 1276
[ 2.433799] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.445315] ata1.00: ATA-8: WDC WD6400AAKS-00A7B0, 01.03B01, max UDMA/133
[ 2.445315] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.445315] ata1.00: configured for UDMA/133
[ 3.025303] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.026358] ata2.00: ATAPI: PLEXTOR DVDR PX-820SA, 1.00, max UDMA/100
[ 3.027702] ata2.00: configured for UDMA/100
[ 3.364732] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.263574] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.599784] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.935859] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.951832] scsi 0:0:0:0: Direct-Access ATA WDC WD6400AAKS-0 01.0 PQ: 0 ANSI: 5
[ 4.951832] scsi 1:0:0:0: CD-ROM PLEXTOR DVDR PX-820SA 1.00 PQ: 0 ANSI: 5
[ 5.152079] ACPI: SSDT CFF7E0D0, 0277 (r1 DpgPmm P001Ist 11 INTL 20060113)
[ 5.153318] ACPI: ACPI0007:00 is registered as cooling_device0
[ 5.153637] ACPI: SSDT CFF7E350, 0277 (r1 DpgPmm P002Ist 12 INTL 20060113)
[ 5.154861] ACPI: ACPI0007:01 is registered as cooling_device1
[ 5.218538] Driver 'sd' needs updating - please use bus_type methods
[ 5.218538] sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB)
[ 5.218538] sd 0:0:0:0: [sda] Write Protect is off
[ 5.218538] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.218538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.218538] sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB)
[ 5.218538] sd 0:0:0:0: [sda] Write Protect is off
[ 5.218538] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.218538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.218538] sda:Driver 'sr' needs updating - please use bus_type methods
[ 5.220402] sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 5.250342] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.255465] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.255465] Uniform CD-ROM driver Revision: 3.20
[ 5.255465] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.258342] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.258342] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.326342] USB Universal Host Controller Interface driver v3.0
[ 5.326342] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 5.326342] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 5.326342] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.326342] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 5.326342] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 5.326342] usb usb1: configuration #1 chosen from 1 choice
[ 5.326342] hub 1-0:1.0: USB hub found
[ 5.326342] hub 1-0:1.0: 2 ports detected
[ 5.439552] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.439552] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.439552] usb usb1: Product: UHCI Host Controller
[ 5.439552] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 5.439552] usb usb1: SerialNumber: 0000:00:1a.0
[ 5.439552] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 5.439552] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 5.439552] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 5.439552] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 5.439552] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 5.439552] usb usb2: configuration #1 chosen from 1 choice
[ 5.439552] hub 2-0:1.0: USB hub found
[ 5.439552] hub 2-0:1.0: 2 ports detected
[ 5.536290] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.536293] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.536296] usb usb2: Product: UHCI Host Controller
[ 5.536297] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 5.536305] usb usb2: SerialNumber: 0000:00:1a.1
[ 5.540191] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 5.540191] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 5.540191] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 5.540191] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 5.540191] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 5.540191] usb usb3: configuration #1 chosen from 1 choice
[ 5.540191] hub 3-0:1.0: USB hub found
[ 5.540191] hub 3-0:1.0: 2 ports detected
[ 5.643807] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.643810] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.643813] usb usb3: Product: UHCI Host Controller
[ 5.643814] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 5.643816] usb usb3: SerialNumber: 0000:00:1a.2
[ 5.644323] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 5.644323] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 5.644323] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 5.644323] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
[ 5.651002] ehci_hcd 0000:00:1a.7: debug port 1
[ 5.651002] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 5.651002] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[ 5.679001] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 5.691008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.691056] usb usb4: configuration #1 chosen from 1 choice
[ 5.691080] hub 4-0:1.0: USB hub found
[ 5.691086] hub 4-0:1.0: 6 ports detected
[ 5.751037] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 5.799025] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.799027] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.799029] usb usb4: Product: EHCI Host Controller
[ 5.799031] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 5.799033] usb usb4: SerialNumber: 0000:00:1a.7
[ 5.798956] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 5.798957] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 5.798957] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.798957] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 5.798957] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 5.798957] usb usb5: configuration #1 chosen from 1 choice
[ 5.798957] hub 5-0:1.0: USB hub found
[ 5.798957] hub 5-0:1.0: 2 ports detected
[ 5.938951] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.938954] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.938956] usb usb5: Product: UHCI Host Controller
[ 5.938958] usb usb5: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 5.938959] usb usb5: SerialNumber: 0000:00:1d.0
[ 5.942880] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 5.942880] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 5.942880] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.942880] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 5.942880] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 5.942880] usb usb6: configuration #1 chosen from 1 choice
[ 5.942880] hub 6-0:1.0: USB hub found
[ 5.942880] hub 6-0:1.0: 2 ports detected
[ 6.050946] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.050949] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.050951] usb usb6: Product: UHCI Host Controller
[ 6.050953] usb usb6: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 6.050954] usb usb6: SerialNumber: 0000:00:1d.1
[ 6.050992] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 6.050997] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 6.050999] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.051026] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 6.051044] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 6.051086] usb usb7: configuration #1 chosen from 1 choice
[ 6.051101] hub 7-0:1.0: USB hub found
[ 6.051105] hub 7-0:1.0: 2 ports detected
[ 6.182722] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.182724] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.182727] usb usb7: Product: UHCI Host Controller
[ 6.182728] usb usb7: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 6.182730] usb usb7: SerialNumber: 0000:00:1d.2
[ 6.182722] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 6.182722] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 6.182722] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.182722] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 6.189548] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.189548] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 6.189548] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 6.201553] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.201606] usb usb8: configuration #1 chosen from 1 choice
[ 6.201631] hub 8-0:1.0: USB hub found
[ 6.201636] hub 8-0:1.0: 6 ports detected
[ 6.305576] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.305579] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.305581] usb usb8: Product: EHCI Host Controller
[ 6.305583] usb usb8: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 6.305585] usb usb8: SerialNumber: 0000:00:1d.7
[ 6.309049] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 6.309049] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 6.309049] sky2 0000:02:00.0: v1.21 addr 0xfeafc000 irq 17 Yukon-EC Ultra (0xb4) rev 3
[ 6.309049] sky2 eth0: addr 00:22:15:32:fb:bb
[ 6.309049] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 6.329021] usb 4-2: new high speed USB device using ehci_hcd and address 2
[ 6.505462] usb 4-2: configuration #1 chosen from 1 choice
[ 6.509461] usb 4-2: New USB device found, idVendor=0424, idProduct=2228
[ 6.509461] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.509461] usb 4-2: Product: Flash Card Reader
[ 6.509461] usb 4-2: Manufacturer: Generic
[ 6.509461] usb 4-2: SerialNumber: 000022272228
[ 6.517728] Initializing USB Mass Storage driver...
[ 6.752775] usb 4-3: new high speed USB device using ehci_hcd and address 3
[ 7.014216] usb 4-3: configuration #1 chosen from 1 choice
[ 7.017264] usb 4-3: New USB device found, idVendor=0411, idProduct=0105
[ 7.017264] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 7.017264] usb 4-3: Product: USB-SATA Bridge
[ 7.017264] usb 4-3: Manufacturer: BUFFALO
[ 7.017264] usb 4-3: SerialNumber: 0000141043FF
[ 7.749270] usb 8-3: new high speed USB device using ehci_hcd and address 2
[ 7.881677] usb 8-3: configuration #1 chosen from 1 choice
[ 7.885264] hub 8-3:1.0: USB hub found
[ 7.885264] hub 8-3:1.0: 4 ports detected
[ 7.985323] usb 8-3: New USB device found, idVendor=0543, idProduct=1169
[ 7.985326] usb 8-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.225134] scsi7 : SCSI emulation for USB Mass Storage devices
[ 8.225134] usb-storage: device found at 2
[ 8.225134] usb-storage: waiting for device to settle before scanning
[ 8.225134] scsi8 : SCSI emulation for USB Mass Storage devices
[ 8.225134] usbcore: registered new interface driver usb-storage
[ 8.225134] USB Mass Storage support registered.
[ 8.225776] usb-storage: device found at 3
[ 8.225777] usb-storage: waiting for device to settle before scanning
[ 8.477632] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 8.636410] usb 2-2: configuration #1 chosen from 1 choice
[ 8.687474] usb 2-2: New USB device found, idVendor=067b, idProduct=2305
[ 8.687474] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.687474] usb 2-2: Product: IEEE-1284 Controller
[ 8.687474] usb 2-2: Manufacturer: Prolific Technology Inc.
[ 8.897321] usb 8-3.1: new low speed USB device using ehci_hcd and address 4
[ 8.999653] usb 8-3.1: configuration #1 chosen from 1 choice
[ 9.001051] usb 8-3.1: New USB device found, idVendor=040b, idProduct=6510
[ 9.001053] usb 8-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.001054] usb 8-3.1: Product: Bar Code Reader
[ 9.001055] usb 8-3.1: Manufacturer: Weltrend
[ 9.227854] usb 8-3.3: new low speed USB device using ehci_hcd and address 5
[ 9.328613] usb 8-3.3: configuration #1 chosen from 1 choice
[ 9.331826] usb 8-3.3: New USB device found, idVendor=046d, idProduct=c016
[ 9.331826] usb 8-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.331826] usb 8-3.3: Product: Optical USB Mouse
[ 9.331826] usb 8-3.3: Manufacturer: Logitech
[ 9.331826] usbcore: registered new interface driver hiddev
[ 9.587834] usb 6-2: new full speed USB device using uhci_hcd and address 2
[ 9.865416] usb 6-2: configuration #1 chosen from 1 choice
[ 9.905374] usb 6-2: New USB device found, idVendor=0471, idProduct=0329
[ 9.905376] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 9.905377] usb 6-2: SerialNumber: 016900000A7500A1
[ 9.911828] input: Weltrend Bar Code Reader as /class/input/input2
[ 9.927928] input,hidraw0: USB HID v1.10 Keyboard [Weltrend Bar Code Reader] on usb-0000:00:1d.7-3.1
[ 9.931829] input: Logitech Optical USB Mouse as /class/input/input3
[ 9.957772] input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.7-3.3
[ 9.957788] usbcore: registered new interface driver usbhid
[ 9.957791] usbhid: v2.6:USB HID core driver
[ 13.532327] usb-storage: device scan complete
[ 13.532487] scsi 8:0:0:0: Direct-Access BUFFALO External HDD PQ: 0 ANSI: 2 CCS
[ 13.536826] usb-storage: device scan complete
[ 13.558513] scsi 7:0:0:0: Direct-Access Generic Flash HS-CF 3.95 PQ: 0 ANSI: 0
[ 13.563130] scsi 7:0:0:1: Direct-Access Generic Flash HS-MS 3.95 PQ: 0 ANSI: 0
[ 13.567446] scsi 7:0:0:2: Direct-Access Generic Flash HS-SM 3.95 PQ: 0 ANSI: 0
[ 13.568387] scsi 7:0:0:3: Direct-Access Generic Flash HS-SD/MMC 3.95 PQ: 0 ANSI: 0
[ 21.873924] scsi6 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 21.873925]
[ 21.873926] aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
[ 21.873927]
[ 21.877913] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 21.877913] skge 1.13 addr 0xfebf8000 irq 18 chip Yukon-Lite rev 9
[ 21.877913] skge eth1: addr 00:22:15:33:13:66
[ 21.877913] ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 21.930422] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febfe000-febfe7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 21.987746] scsi: waiting for bus probes to complete ...
[ 22.414513] scsi 6:0:2:0: Processor HP C5110A 3638 PQ: 0 ANSI: 2
[ 22.414513] target6:0:2: Beginning Domain Validation
[ 22.422413] target6:0:2: Ending Domain Validation
[ 23.211015] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c00015780fd]
[ 23.700282] sd 8:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 23.700282] sd 8:0:0:0: [sdb] Write Protect is off
[ 23.700282] sd 8:0:0:0: [sdb] Mode Sense: 34 00 00 00
[ 23.700282] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 23.700282] sd 8:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 23.700282] sd 8:0:0:0: [sdb] Write Protect is off
[ 23.700282] sd 8:0:0:0: [sdb] Mode Sense: 34 00 00 00
[ 23.700282] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 23.700282] sdb: sdb1
[ 23.700282] sd 8:0:0:0: [sdb] Attached SCSI disk
[ 23.700282] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 23.708780] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 23.708780] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 23.713586] sd 7:0:0:1: [sdd] Attached SCSI removable disk
[ 23.713609] sd 7:0:0:1: Attached scsi generic sg4 type 0
[ 23.719832] sd 7:0:0:2: [sde] Attached SCSI removable disk
[ 23.719857] sd 7:0:0:2: Attached scsi generic sg5 type 0
[ 23.770286] sd 7:0:0:3: [sdf] Attached SCSI removable disk
[ 23.770286] sd 7:0:0:3: Attached scsi generic sg6 type 0
[ 23.771824] scsi 6:0:2:0: Attached scsi generic sg7 type 3
[ 23.832393] device-mapper: uevent: version 1.0.3
[ 23.832393] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [email protected]
[ 34.139851] PM: Starting manual resume from disk
[ 34.148402] ReiserFS: dm-2: found reiserfs format "3.6" with standard journal
[ 34.148402] ReiserFS: dm-2: using ordered data mode
[ 34.152403] ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 34.152403] ReiserFS: dm-2: checking transaction log (dm-2)
[ 34.202262] ReiserFS: dm-2: Using r5 hash to sort names
[ 36.215567] udevd version 125 started
[ 36.977789] input: Power Button (FF) as /class/input/input4
[ 37.038099] ACPI: Power Button (FF) [PWRF]
[ 37.038099] input: Power Button (CM) as /class/input/input5
[ 37.095081] ACPI: Power Button (CM) [PWRB]
[ 37.125540] usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
[ 37.125540] usbcore: registered new interface driver usblp
[ 37.253032] Linux video capture interface: v2.00
[ 37.361408] input: PC Speaker as /class/input/input6
[ 37.488907] pwc: Philips webcam module version 10.0.13 loaded.
[ 37.488907] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
[ 37.488907] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
[ 37.488907] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
[ 37.488907] pwc: Philips SPC 900NC USB webcam detected.
[ 37.509636] pwc: Registered as /dev/video0.
[ 37.512906] usbcore: registered new interface driver Philips webcam
[ 37.544906] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
[ 37.708801] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 37.708801] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 37.773538] usbcore: registered new interface driver snd-usb-audio
[ 78.886662] loop: module loaded
[ 79.070954] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 79.070954] vboxdrv: Successfully done.
[ 79.070954] vboxdrv: Found 2 processor cores.
[ 79.070954] VBoxDrv: dbg - g_abExecMemory=ffffffffa034b980
[ 79.079032] vboxdrv: fAsync=0 offMin=0x321 offMax=0xab9
[ 79.088129] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 79.097492] vboxdrv: Successfully loaded version 3.0.4 (interface 0x000e0000).
[ 79.171399] coretemp coretemp.0: Using relative temperature scale!
[ 79.183550] coretemp coretemp.1: Using relative temperature scale!
[ 79.239542] w83627ehf: Found W83627EHG chip at 0x290
[ 86.046803] fuse init (API version 7.9)
[ 86.086471] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
[ 86.094760] ReiserFS: sda1: using ordered data mode
[ 86.113482] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 86.125754] ReiserFS: sda1: checking transaction log (sda1)
[ 86.151256] ReiserFS: sda1: Using r5 hash to sort names
[ 86.417782] Adding 5242872k swap on /dev/mapper/sala-swappi. Priority:-1 extents:1 across:5242872k
[ 87.244028] skge eth1: enabling interface
[ 87.347997] sky2 eth0: enabling interface
[ 88.978416] skge eth1: Link is up at 100 Mbps, full duplex, flow control both
[ 89.090496] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 93.600094] lp: driver loaded but no devices found
[ 93.652155] ppdev: user-space parallel port driver
[ 97.943890] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0534900
[ 97.972869] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa054c5e0
[ 99.031324] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 101.123523] Bluetooth: Core ver 2.11
[ 101.134038] NET: Registered protocol family 31
[ 101.143102] Bluetooth: HCI device and connection manager initialized
[ 101.151268] Bluetooth: HCI socket layer initialized
[ 101.178957] Bluetooth: L2CAP ver 2.9
[ 101.186950] Bluetooth: L2CAP socket layer initialized
[ 101.291268] Bluetooth: RFCOMM socket layer initialized
[ 101.298401] Bluetooth: RFCOMM TTY layer initialized
[ 101.312603] Bluetooth: RFCOMM ver 1.8
[ 107.879584] nvidia: module license 'NVIDIA' taints kernel.
[ 108.131814] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 108.131825] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 108.131904] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed Jun 4 23:40:50 PDT 2008
[ 108.271686] ip_tables: (C) 2000-2006 Netfilter Core Team

Eetu95 kirjoitti:

Ekasta:
CPU 0 attaching NULL schead-domain
CPU 1 attaching NULL schead-domain
CPU 0 attaching NULL schead-domain:
domain 0: span 0-1
level CPU groups: 01

Tokasta:
Usage:
fdisk [-b SSZ] [-u] DISK Change partition table
fdisk -l [-b SSZ] [-u] disk List partition table(s)
fdisk -s PARTITION Give partition size(s) in bl(ja sitten jäi valokuvasta poijes...)
fdisk -v Give fdisk version

Ja näiden jälkeen tuli jotain ohjeita. Pitää kyllä olla aika viisas, jos noista ymmärtää mitään :) Sano jos jotain tärkeää jäi puuttumaan niin katon uudelleen.

Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000676c4

Device Boot Start End Blocks Id System
/dev/sda1 * 1 12 96358 83 Linux
/dev/sda2 13 24 96390 83 Linux
/dev/sda3 25 77825 624936532 5 Extended
/dev/sda5 25 60812 488279578 83 Linux
/dev/sda6 61421 77825 131773131 83 Linux
/dev/sda7 60813 61420 4883728 82 Linux swap / Solaris

Partition table entries are not in disk order

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xda70f604

Device Boot Start End Blocks Id System
/dev/sdb1 1 121601 976760001 c W95 FAT32 (LBA)

Disk /dev/dm-0: 499.9 GB, 499997235712 bytes
255 heads, 63 sectors/track, 60787 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000

Disk /dev/dm-0 doesn't contain a valid partition table

Disk /dev/dm-1: 5368 MB, 5368709120 bytes
255 heads, 63 sectors/track, 652 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000

Disk /dev/dm-1 doesn't contain a valid partition table

Disk /dev/dm-2: 494.6 GB, 494625882112 bytes
255 heads, 63 sectors/track, 60134 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000

Disk /dev/dm-2 doesn't contain a valid partition table

Disk /dev/sdg: 2021 MB, 2021654016 bytes
62 heads, 62 sectors/track, 1027 cylinders
Units = cylinders of 3844 * 512 = 1968128 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/sdg1 1 1016 1952721 83 Linux

Eetu95 kirjoitti:

Ekasta:
CPU 0 attaching NULL schead-domain
CPU 1 attaching NULL schead-domain
CPU 0 attaching NULL schead-domain:
domain 0: span 0-1
level CPU groups: 01

Tokasta:
Usage:
fdisk [-b SSZ] [-u] DISK Change partition table
fdisk -l [-b SSZ] [-u] disk List partition table(s)
fdisk -s PARTITION Give partition size(s) in bl(ja sitten jäi valokuvasta poijes...)
fdisk -v Give fdisk version

Ja näiden jälkeen tuli jotain ohjeita. Pitää kyllä olla aika viisas, jos noista ymmärtää mitään :) Sano jos jotain tärkeää jäi puuttumaan niin katon uudelleen.

hwinfo --disk