To install your HP Photosmart 7350 printer on Windows Vista, follow these steps:
1) If your printer is connected to your computer, disconnect it by disconnecting the USB cable from the back of the computer.
2) Go Start > Control Panel > Hardware & Sounds
3) Then click on "Printers"
4) Click "Add a Printer"
5) Click on "Add a Local Printer"
6) Check off the "Use an Existing Port" check box
7) In the drop down list, select "LPT1: (Printer Port)" as your existing port.
8) Click the Next button
9) Under "Manufacturer", select "HP"
10) Under "Printers" choose "Deskjet 5550"
11) Click the Next button
12) In the "Printer Name" text box, type "Photosmart 7350" (without the double quotes)
13) Click the next button
14) You should get a message saying that the printer was successfully added. At this point, you can reconnect your printer to your computer by plugging the USB cable back into the port on your computer.
15) A "Found New Hardware" box should show up. Click on the "Cancel" button to close the box. If more than one box shows up, click Cancel on all of them.
16) Go back to the printers folder. If you closed it, you can get back to it by going Start > Control Panel > Hardware & Sounds > Printers
17) Right click on the Photosmart 7350 printer icon and select "Properties" from the context menu that appears.
18) Select the "Ports" tab.
19) Change the port from "LPT1" to "DOT4"
20) Click the "Apply" button.
1) If your printer is connected to your computer, disconnect it by disconnecting the USB cable from the back of the computer.
2) Go Start > Control Panel > Hardware & Sounds
3) Then click on "Printers"
4) Click "Add a Printer"
5) Click on "Add a Local Printer"
6) Check off the "Use an Existing Port" check box
7) In the drop down list, select "LPT1: (Printer Port)" as your existing port.
8) Click the Next button
9) Under "Manufacturer", select "HP"
10) Under "Printers" choose "Deskjet 5550"
11) Click the Next button
12) In the "Printer Name" text box, type "Photosmart 7350" (without the double quotes)
13) Click the next button
14) You should get a message saying that the printer was successfully added. At this point, you can reconnect your printer to your computer by plugging the USB cable back into the port on your computer.
15) A "Found New Hardware" box should show up. Click on the "Cancel" button to close the box. If more than one box shows up, click Cancel on all of them.
16) Go back to the printers folder. If you closed it, you can get back to it by going Start > Control Panel > Hardware & Sounds > Printers
17) Right click on the Photosmart 7350 printer icon and select "Properties" from the context menu that appears.
18) Select the "Ports" tab.
19) Change the port from "LPT1" to "DOT4"
20) Click the "Apply" button.
Vastaukset 5
Vanhimmat
Linuxissa vastaava ohje olisi 200 riviä pitkä ja vaatisi koodailua komentorivillä.
Kuka sinä niistä penteistä lienetkin, annan silti pikkuisen vihjeen: Luulo ei ole tiedon väärti. Flaskaat itsesi, jos sinulla ei ole asiaa sanottavana hölötyksen sijaan.
cups, jos ei se lähtenyt automaattisesti.
tulostimella tekee, tulostin kuluttaa kallista paperia ja eihän köyhällä linkku-urpolla ole varaa paperia ostella ..
Linuxissa olisin
a) kytkenyt tulostimen
b) tulostanut
Ai että on vaikeaa. Ihan pahaa tekee miettiä winkura rumbaa,
Vaimo usein ihmettelee kun oheislaitteen mukana tullutta asennuslevyä en edes tarvitse. Yleensä sanon hänelle: "heitä se roskikseen, linuxissa ei mitään asennuslevykkeitä tarvita oheislaitteille."