Joo elikkä tuli eräältä trackerilta uuden F-Secure päivityksen asennettuani tällainen huomautus:
The tracker has determined that you are firewalled or NATed and cannot accept incoming connections.
This means that other peers in the swarm will be unable to connect to you, only you to them. Even worse, if two peers are both in this state they will not be able to connect at all. This has obviously a detrimental effect on the overall speed.
The way to solve the problem involves opening the ports used for incoming connections (the same range you defined in your client) on the firewall and/or configuring your NAT server to use a basic form of NAT for that range instead of NAPT (the actual process differs widely between different router models. Check your router documentation and/or support forum. You will also find lots of information on the subject at PortForward).
Eli kysymys yksinkertaisesti kuuluu miten saan Palomuurin ja F-securen asetuksista värkättyä jotenkin noiden tiettyjen uTorrent porttien aukaisun? yritin jo oman avun mukaan eikä tietenkään missään ole mitään mukavan yksinkertaista paneelia mistä voisin vain hiirtä klikkaamalla "open ports "this and that" from this program etc..."
The tracker has determined that you are firewalled or NATed and cannot accept incoming connections.
This means that other peers in the swarm will be unable to connect to you, only you to them. Even worse, if two peers are both in this state they will not be able to connect at all. This has obviously a detrimental effect on the overall speed.
The way to solve the problem involves opening the ports used for incoming connections (the same range you defined in your client) on the firewall and/or configuring your NAT server to use a basic form of NAT for that range instead of NAPT (the actual process differs widely between different router models. Check your router documentation and/or support forum. You will also find lots of information on the subject at PortForward).
Eli kysymys yksinkertaisesti kuuluu miten saan Palomuurin ja F-securen asetuksista värkättyä jotenkin noiden tiettyjen uTorrent porttien aukaisun? yritin jo oman avun mukaan eikä tietenkään missään ole mitään mukavan yksinkertaista paneelia mistä voisin vain hiirtä klikkaamalla "open ports "this and that" from this program etc..."
Vastaukset 2
Vanhimmat
Tuossa on ohjeet -> http://portforward.com/english/routers/p...D1/BitComet. htm
Tämän se linkki sisälsi:
You have reached this page in error. We update PortForward.com very often, so old links sometimes become invalid. If you are sure that this page should exist or encounter a broken link, please let us know by visiting our forum.