Kukaan kokeillut tätä kikkaa vielä, miten mahtaa toimia???
JosephBeam
My Garage Join Date: Oct 2005
Posts: 3
RE: How to Disable the Seat Belt Alarm
--------------------------------------------------------------------------------
Here is what it says in the manual. This is from the 05 but I assume 06 is the same also.
NOTE: The following steps must occur within the first 60 seconds of the ignition swith being turned to the ON or Start position. DaimlerChrysler does not recommend deactivating the Enhanced Warning System (BeltAlert).
1. Turn the ignition swith to the OFF position and buckle the driver's seat belt.
2. Start the engine and wait for the Seat Belt Warning Light to turn off.
3. Within 60 seconds of starting the vehicle, unbuckle and then re-buckle the driver's seat belt at least three times within 10 seconds, ending with the seat belt buckled.
4. Turn off the engine. A single chime will sound to signify that you have successfully completed the programming.
The Enhanced Warning System (BeltAlert) can be reactivated by repeating this procedure.
JosephBeam
My Garage Join Date: Oct 2005
Posts: 3
RE: How to Disable the Seat Belt Alarm
--------------------------------------------------------------------------------
Here is what it says in the manual. This is from the 05 but I assume 06 is the same also.
NOTE: The following steps must occur within the first 60 seconds of the ignition swith being turned to the ON or Start position. DaimlerChrysler does not recommend deactivating the Enhanced Warning System (BeltAlert).
1. Turn the ignition swith to the OFF position and buckle the driver's seat belt.
2. Start the engine and wait for the Seat Belt Warning Light to turn off.
3. Within 60 seconds of starting the vehicle, unbuckle and then re-buckle the driver's seat belt at least three times within 10 seconds, ending with the seat belt buckled.
4. Turn off the engine. A single chime will sound to signify that you have successfully completed the programming.
The Enhanced Warning System (BeltAlert) can be reactivated by repeating this procedure.
Vastaukset 3
Vanhimmat
-06 Caliberissa kaikki meni niinkuin ohjeessa sanotaan ja viimeinen piippauskin kuului. Mutta ääni kuuluu kyllä edelleen siinä vaiheessa kun laittaa virrat päälle eikä turvavyö ole käytössä.
Ehkä tuo toimii sitten vain ajon aikana, itse haluaisin mieluummin eroon siitä piippauksesta kun käynnistelet autoa eikä vyö vielä kytketty.
se myös silloin kun moottori on käynnissä mutta auto ei liiku ja kuskilla ei ole vyö laitettuna?
ekan kerran kun laittaa virrat päälle. Ei se sen jälkeen piippaile jos istuskelet autossa auto käynnissä paikallaan.