Windows:
1. Lataa valmistajan sivuilta ajurit
2. Asenna ne
3. Olet valmis
Linux-kone Atin näytönohjaimella:
1. Identify whether you have the linux kernel sources installed. In root shell type emerge kernelname-sources -pv , if already installed go to next step otherwise type emerge =sys-kernel/kernelname-sources-2.6.kernelversion (kernel version can be identified by typing uname -r or uname -a)
2. If not using genkernel ensure your kernel configuration supports your video card (gentoo-wiki.com has more information)
3. In a root shell type emerge ati-drivers
4. Optionally install the ati control panel by typing emerge ati-drivers-extra on x86 systems.
5. In a root shell type env-update && source /etc/profile
6. Load the ATI module and change configuration by typing (still in a root shell) modprobe fglrx && eselect opengl set ati
7. Update your xorg.conf file manually (change Driver "radeon" or "vesa" to "fglrx") or by typing /opt/ati/bin/aticonfig --initial --input=/etc/X11/xorg.conf (still in a root shell)
8. Restart X (Press Ctrl-Alt-Backspace)
9. If X doesn't work please pastebin the contents of /var/log/Xorg.0.log and possibly /etc/X11/xorg.conf and check #Sabayon, the Sabayon Forums or gentoo-wiki.com, If it does, in root shell type glxinfo | grep direct , if this says Yes then continue to next step
10. Using Google or other means identify whether your card works best with XGL or AIGLX or neither.
11. Using accel-manager which will need to be emerged by typing (still in a root shell) emerge accel-manager ), choose your preferred method XGL or AIGLX. Or if neither ignore this step.
12. Repeat Step 8
13. You should now have a working ATI card with DRI and if you choose XGL or AIGLX. If you some reason you don't please use the resources in the Forum Usage & Resources Post in Sabayon Forums to remedy the problem. These resouces include http://gentoo-wiki.com/Ati . It would be beneficial if you repeat Step 9 as part of the troubleshooting process.
Linux-kone Nvidian näytönohjaimella:
1. In root shell emerge kernelname-sources -pv , if already installed go to next step otherwise type emerge =kernelname-sources-2.6.kernelversion (kernel version can be identified by typing uname -r or uname -a )
2. If not using genkernel ensure your kernel configuration supports your video card (gentoo-wiki.com has more information)
3. In root shell type emerge nvidia-drivers (Most older cards need a version that is 97.00 or lower. Add >=x11-drivers/nvidia-drivers-97.00 to your /etc/portage/package.mask file before emerging. i.e. echo \>=x11-drivers/nvidia-drivers-97.00 >> /etc/portage/package.mask before you emerge nvidia-drivers) --Megaman5 01:58, 24 March 2008 (UTC)
4. Edit etc/X11/xorg.conf and change the Driver option under Device from nv or vesa to nvidia, also ensure the the Load glx line is uncommented in the Module Section
5. In a root shell type eselect opengl set nvidia
6. Make sure your user is in the video group by typing gpasswd -a youruser video in a root shell.
7. Restart X
8. If X doesn't work please pastebin the contents of /var/log/Xorg.0.log and possibly /etc/X11/xorg.conf and check #Sabayon, the Sabayon Forums or gentoo-wiki.com, If it does, in root shell type glxinfo | grep direct, if this says Yes then continue to next step
9. Using Google or other means identify whether your card works best with XGL or AIGLX or neither.
10. Using accel-manager which will need to be emerged by typing (still in a root shell) emerge accel-manager, choose your preferred method XGL or AIGLX. Or if neither ignore this step.
11. Repeat Step 7
12. You should now have a working NVIDIA card with DRI and if you choose XGL or AIGLX. If you some reason you don't please use the resources in the Forum Usage & Resources Post in Sabayon Forums to remedy the problem.These resouces include http://gentoo-wiki.com/HOWTO_nVidia_Drivers. It would be beneficial if you repeat Step 8 as part of the troubleshooting process.
Entäpä resoluution vaihtaminen Linuxissa?
1. Open a terminal (Terminal in Gnome, Konsole in KDE or your terminal of choice)
2. Enter your root password.
3. gedit /etc/X11/xorg.conf
4. Under the Screen & Monitor section find the resolution modes Line (the default lines are 190, 196,202) which normal looks like: Modes "1280x1024" "1024x768" "800x600" "640x480"
5. Add the resolution you want after the Modes before the first resolution in this case, before "1280x1024". The format of a resolution is widthxheight, eg 1400x1050, 1280x800, etc
6. Save your xorg.conf file using File > Save or Ctrl-S
7. Close your editor.
10. Restart X, by using Ctrl-Alt-Backspace (save all Work first)
Linux ei osaa edes vaihtaa resoluutiota ilman uudelleenkäynnistämistä.
1. Lataa valmistajan sivuilta ajurit
2. Asenna ne
3. Olet valmis
Linux-kone Atin näytönohjaimella:
1. Identify whether you have the linux kernel sources installed. In root shell type emerge kernelname-sources -pv , if already installed go to next step otherwise type emerge =sys-kernel/kernelname-sources-2.6.kernelversion (kernel version can be identified by typing uname -r or uname -a)
2. If not using genkernel ensure your kernel configuration supports your video card (gentoo-wiki.com has more information)
3. In a root shell type emerge ati-drivers
4. Optionally install the ati control panel by typing emerge ati-drivers-extra on x86 systems.
5. In a root shell type env-update && source /etc/profile
6. Load the ATI module and change configuration by typing (still in a root shell) modprobe fglrx && eselect opengl set ati
7. Update your xorg.conf file manually (change Driver "radeon" or "vesa" to "fglrx") or by typing /opt/ati/bin/aticonfig --initial --input=/etc/X11/xorg.conf (still in a root shell)
8. Restart X (Press Ctrl-Alt-Backspace)
9. If X doesn't work please pastebin the contents of /var/log/Xorg.0.log and possibly /etc/X11/xorg.conf and check #Sabayon, the Sabayon Forums or gentoo-wiki.com, If it does, in root shell type glxinfo | grep direct , if this says Yes then continue to next step
10. Using Google or other means identify whether your card works best with XGL or AIGLX or neither.
11. Using accel-manager which will need to be emerged by typing (still in a root shell) emerge accel-manager ), choose your preferred method XGL or AIGLX. Or if neither ignore this step.
12. Repeat Step 8
13. You should now have a working ATI card with DRI and if you choose XGL or AIGLX. If you some reason you don't please use the resources in the Forum Usage & Resources Post in Sabayon Forums to remedy the problem. These resouces include http://gentoo-wiki.com/Ati . It would be beneficial if you repeat Step 9 as part of the troubleshooting process.
Linux-kone Nvidian näytönohjaimella:
1. In root shell emerge kernelname-sources -pv , if already installed go to next step otherwise type emerge =kernelname-sources-2.6.kernelversion (kernel version can be identified by typing uname -r or uname -a )
2. If not using genkernel ensure your kernel configuration supports your video card (gentoo-wiki.com has more information)
3. In root shell type emerge nvidia-drivers (Most older cards need a version that is 97.00 or lower. Add >=x11-drivers/nvidia-drivers-97.00 to your /etc/portage/package.mask file before emerging. i.e. echo \>=x11-drivers/nvidia-drivers-97.00 >> /etc/portage/package.mask before you emerge nvidia-drivers) --Megaman5 01:58, 24 March 2008 (UTC)
4. Edit etc/X11/xorg.conf and change the Driver option under Device from nv or vesa to nvidia, also ensure the the Load glx line is uncommented in the Module Section
5. In a root shell type eselect opengl set nvidia
6. Make sure your user is in the video group by typing gpasswd -a youruser video in a root shell.
7. Restart X
8. If X doesn't work please pastebin the contents of /var/log/Xorg.0.log and possibly /etc/X11/xorg.conf and check #Sabayon, the Sabayon Forums or gentoo-wiki.com, If it does, in root shell type glxinfo | grep direct, if this says Yes then continue to next step
9. Using Google or other means identify whether your card works best with XGL or AIGLX or neither.
10. Using accel-manager which will need to be emerged by typing (still in a root shell) emerge accel-manager, choose your preferred method XGL or AIGLX. Or if neither ignore this step.
11. Repeat Step 7
12. You should now have a working NVIDIA card with DRI and if you choose XGL or AIGLX. If you some reason you don't please use the resources in the Forum Usage & Resources Post in Sabayon Forums to remedy the problem.These resouces include http://gentoo-wiki.com/HOWTO_nVidia_Drivers. It would be beneficial if you repeat Step 8 as part of the troubleshooting process.
Entäpä resoluution vaihtaminen Linuxissa?
1. Open a terminal (Terminal in Gnome, Konsole in KDE or your terminal of choice)
2. Enter your root password.
3. gedit /etc/X11/xorg.conf
4. Under the Screen & Monitor section find the resolution modes Line (the default lines are 190, 196,202) which normal looks like: Modes "1280x1024" "1024x768" "800x600" "640x480"
5. Add the resolution you want after the Modes before the first resolution in this case, before "1280x1024". The format of a resolution is widthxheight, eg 1400x1050, 1280x800, etc
6. Save your xorg.conf file using File > Save or Ctrl-S
7. Close your editor.
10. Restart X, by using Ctrl-Alt-Backspace (save all Work first)
Linux ei osaa edes vaihtaa resoluutiota ilman uudelleenkäynnistämistä.
Vastaukset 8
Vanhimmat
Esim. Ubuntussa järjestelmä kysyy haluatko avoimen vai valmistajan näytönohjainajurin! Ja se on yksi klikkaus!
Resoluution saa vaihdettua graafisella ohjelmalla ihan kuin Windowsissa!
EIKÖ JOKU VOISI JÄLJITTÄÄ JA LAITTAA KYLMÄKSI TÄTÄ PENTTI NELOSTA?
Kysy rohkeasti apua ongelmiisi tietokoneen ja ohjelmien kanssa. Kokeneemmat käyttäjät jakavat mielellään neuvoja.
Tuossahan oli apuja, nyt osaa Windows ja Linux-käyttäjät asentaa näytönohjaimen ajurit.
Ububtu 9.04 ATI Radeon 9200 40-tuumainen full-HD-tv = Asenna Ubuntu, ajurit ja resoluutio kohdallaan ihan ensimmäisestä käynnistyksestä lähtien. Ei tarvinnut ladata itse eikä asentaa yhtään mitään.
Aloittelijan pahimmat mokat ovat nyt ohitse.
Ei mun vaan ole tarvinnut käännellä mitään lähdekoodeista ym. shittiä mitä koitat väittää eikä resoluution vaihtaminen ole koskaan vaatinut uudelleen käynnistystä!
JOTEN VÄITTÄMÄSI ON SILKKAA PASKAA!
Jospa sulla onkin mäkki, koita tarkistaa tuo jostakin, ennen vastaamista.
Kaikenlaiset aloittelijat täällä taas kirjoittelevat.
Normaali PC ja Ubuntu. Mitään Penan esittämää väitettä en ole huomannut todeksi, Pena siis valehtelee!