häiriköt mahdollista hiljentää!

Tilatkaapa näitä joka paikkaan pikavauhtia.......


GSM-Jammer SPYTEC
Mobile Phone Blocker
Functional Description
This system is based on a unique transmission method which interferes with the decoding circuits of mobile phones.
The GSM-Jammmer SPYTEC is radiating small- signal radiowaves, similar to those of base- stations. As soon as the GSM-Jammmer SPYTEC goes into operation, it will supress the logg- in of the mobile phone and no further connection to the base station will be possible.
Calls cannot be received and activated any more. All active calls will be interupted immediately within the active radius of the unit.

This system is the ultimative solution for areas where mobile phones are disturbing by ringing signals or conversations.

Addionally a security lack can be caused by unwanted radiocommunications. The GSM-Jammmer SPYTEC enables users to eleminate this security lacks in different instituions as for example military bases, banks, prisons, governmential buildings, embassies etc.
For adjustment to the local environment the unit has two different switchable output levels.


Applications
Meeting- and Conference rooms
Museums
Hospitals
Galeries
Theater
Concert Halls
Churches
Restaurants
Training Centres
Factories
Banks
and many other...


Technical Data:
Operational band: GSM 900 MHz and 1800 MHz
Power consumption: 12 V DC, 300 mA
Power supply: Included external plug-type power supply
Output power: Switchable, Norm / 10 Times
Effective radius: 8 - 50 Meter
Dimensions: 170 x 103 x 50 mm incl. Antennas ( H x W x D )
Weight: Unit: 200 grs
Housing: Metal

Instruction 1. Activate a mobile GSM phone.
2. Insert the power supply jack to the 12 V socket of the blocker.
3. Connect power supply to mains socket.
4. Turn on the switch to Norm ( normal output power level, LED color= green ).
5. Try the function at the selected blocker position. After some time (depending on the type of phone ) the mobile phone should not work any more ( „No Network“ ).
6. Move around with the mobile phone to find out the size of covered area
7. If the coverage is not sufficient enough, try to find a better position for the blocker.
8. If more covered area should be needed, switch to High ( LED color= red ), which will increase the output power to 10 times more. The size of the covered area should be double at least after this.
9. For mobile applications the blocker can be powered via the 12 V DC socket by an external battery ( please watch the polary ! ).

General
The unit is designed for indoor use only!
The effective covered area is always depending on the signal strength of the closest cellular base station.
Although the unit was tested carefully under very different environmental conditions, it is not possible to fix a guaranteed area of coverage.
The minimum area, that could be tested, was 8 meters radius at Norm position, the maximum area 50 meters at High position.

In your specific place this values may vary slightly from the above mentioned figures, which is absolutely normal.

Please check your law! Exportpreis: DM 1.870,-- (ohne MwSt.)

Made in Germany!

Keine Auslieferung in Deutschland!

Bitte prüfen Sie bei der Einfuhr in Ihr Land, die Gesetzlichen Bestimmungen!


GSM Jammer Handy Blocker Mobil Telefon Blocker Gsmjammer handyblocker störgerät für handys störgerät gegen handys störsender störgenerator handystörgerät handystörsender

linkki:

http://www.alarm.de/system/handyblocker.htm

(tuolta näkee kuvan ja lisäksi saksaksi myös ohjeet)