Chrysler Voyager -05 kaukosäätimen ohjelmointi ?

Tilasin uuden avaimen, niin Chrysler liikkeessä ohjelmoitiin. Hinnasta ei tietoa, kun avain maksoi 430 e. jos sinulla on joku nörtti kaveri, niin varmaan osaa ohjelmoida. Täytyy tietenkin olla chryslerin ohjelma ja niitä saa netistä tilattua.

Mutta rahaa on ihan liikaa....

Voi olla vuosimallikohtaista, mutta yksi ohje;

Customer Key Programming
You can program new keys to the system if you have two
valid keys by doing the following:
1. Insert the first valid key into the ignition and turn the
ignition to the ON position for at least 3 seconds but no
longer than 15 seconds. Turn the ignition back to the OFF
position and remove the first key.
2. Insert the second valid key and switch the ignition to
the ON position within 15 seconds. After 10 seconds the
Security Light will begin to flash. Turn the ignition back
to the OFF position and remove the second key.
3. Insert a blank Sentry Key into the ignition and switch
the ignition to the ON position within 60 seconds of
having removed the second key. After 10 seconds the
Security Light will stop flashing, then turn on for 3
seconds; then turn off.
The new Sentry Key has been programmed. The Keyless
Entry Transmitter will also be programmed during this
procedure. Repeat this process to program up to an
additional 6 keys. A maximum of 8 keys can be programmed
to the system, including the original keys
provided with the vehicle.