Puhallin toimii, mutta ilmaa ei tule

Vinkkejä otetaan yhä vastaan. Kaikki osat uusittiin, mutta vika ei poistunut. Loppulasku oli aika mehevää luokkaa...

En tiedä toimiiko alla oleva vikakoodin luku mutta kannattaa kokeilla:

Check for trouble codes:
The HVAC control unit has a self-diagnostic function for heating, ventilation, and air conditioning system. To run the self-diagnostic function, do the following:

1. Turn the ignittion switch OFF.

2. Press and hold the recirculation control and rear window defogger buttons, and turn the ignition switch ON (II).

3. Recirculation indicator turns on for 2 seconds, then self-diagnostic function begins.

NOTE:
•The blower motor will run at any speed during the self-test regardless of the dial positioning.
•In the case of multiple problems, the recirculation indicator will blink the lowest number DTC only.
•If no DTCs are found, the indicator will not blink.

DTC (Recirculation Indicator Blinks) Detection Item
1 An open in the air mix control motor circuit
2 A short in the air mix control motor circuit
3 A problem in the air mix control linkage, door, or motor
4 An open or short in the mode control motor circuit
5 A problem in the mode control linkage, doors, or motor
6 A problem in the blower motor circuit
7 HVAC control unit internal error
8 An open in the evaporator temperature sensor circuit
9 A short in the evaporator temperature sensor circuit