salasana unohtunut

kysyjänä

Mä olen unohtanut windowsin kirjautumiseen tarvittavan salasanan? En pääse sisään, koska se on unohtunut? Miten selvitä tilanteesta?

15

4397

    Vastaukset

    Anonyymi (Kirjaudu / Rekisteröidy)
    5000
    • Basso

      Nollaamalla bios. Emolevyllä on sellanen jumpperi jonka avulla voit nollata biossin. Kato vaikka emolevyn manuaalista missä se jumpperi sijaitsee.
      Itselläni se sijaitsee emolevyn pariston/patterin ylä puolella, Pci paikkojen vieressä.
      Homman pitäisi toimia 100 % varmuudella.

      • tumppu1st

        ...tuubaa. Ei vaikuta käyttöjärjestelmän salasanoihin.

        -T


    • tumppu1st

      ...pääkäyttäjältä resetointia salasanallesi...

      -T

      • Windows NT/2000

        Mä olen yrittänyt siis sisälle omaan tietsikkaani, jossa suomalainen käyttis (Windows NT/2000)... tosi kurjaa, että sinne ei pääse sisään millään ilveellä. Salasanaa en muista.


    • exergy

      Win2000 luo oletusarvoisesti käyttäjän "Järjestelmänvalvoja". Mikäli olet luonut toisen Admin-tilin niin ehkäpä et ole laittanut oletukselle salasanaa? Tämä selviää helposti jos käynnistät F8 Vikasietotilaan ja kirjoitat itsesi sisään nimellä "Järjestelmänvalvoja" etkä kirjoita salasanaruutuun mitään. Huomaa että isoilla ja pienillä kirjaimilla saattaa olla merkitystä (J, j) tai sitten ei. Mikäli nykyinen käyttäjätunnuksesi on samainen "Järjestelmänvalvoja" niin vaikuttaa huonolta, kynä ja paperia ja kaikki oletukset kokeilet ja kirjoitat yhdistelmät samalla paperille ylös. Mikäli salasanasi oli jokin käsittämätöm yhdistelmä niin se on uudelleenasennus. Jos on paljon tarpeellista dataa katoamassa niin viet kovon kaverin koneeseen ja poltat datan CD:lle ennen uudelleenasennusta.

      • tietsikka

      • atkkkk

        Käyttäjätunnukseni ei ole "Järjestelmänvalvoja", mutta toi f8 & vikasietotilajuttu ei oikein noviisille aukene. Miten se tehdään käytännössä? KIITOS muuten näistäkin tiedoista jo. Toivo kasvaa: salasanakyselyn voi ohittaa?


      • -"-

      • -"-
        -"- kirjoitti:

        Kokeilin f8 vikasietotilaa antamillasi ohjeilla, mutta en onnistunut kirjautumaa. Kyseessä on läptoppi enkä pysty kovoa irrottamaan. Mitä tehdä. Auttaisiko:
        http://www.loginrecovery.com/

        tuota http://home.eunet.no/~pnordahl/ntpasswd en ole vielä kokeillut mahdollisten kämien takia.

        http://www.loginrecovery.net/

        oli tosi hyvä juttu. Se toimii ja on luotettava.

        Suosittelen.

        Mikäköhän ohjelma niillä on käytössä?

        Pystyykö kukaan selvittämään?


    • kehiin!

      Windows-pohjaisissa käyttiksissä on onneksi helppoa kräkätä järjestelmänvalvojan salasana.
      Netistä löytyy paljon ohjelmia tähän.
      On tullut itse käytettyä mm. koulun koneessa kun on pitänyt asentaa messenger, jota ei voi ilman järjestelmänvalvojan valtuuksia asentaa.

      Ohjelmia voi etsiä vaikkapa täältä:
      http://www.petri.co.il/forgot_administrator_password.htm

      • mää

        Mitä ohjelmaa olet käyttänyt tuolta?

        Miten se toimisi Windows NT/2000 professionalissa?

        Salasana-kysely pitäisi resetoida, jotta pääsisi kirjautumaan sisään ...


      • kehiin!
        mää kirjoitti:

        Mitä ohjelmaa olet käyttänyt tuolta?

        Miten se toimisi Windows NT/2000 professionalissa?

        Salasana-kysely pitäisi resetoida, jotta pääsisi kirjautumaan sisään ...

        Piti oikein Googlella etsiä, että mitä sitä tulikaan käytettyä..
        Jos en kovin väärin muista, niin se oli:
        http://home.eunet.no/~pnordahl/ntpasswd/bootdisk.html
        ja sieltä bd050303.zip

        se pitää siis purkaa ensin ja sitten kirjoittaa korpulle.
        linuxissa dd if= of=/dev/fd0
        ja Windowsissa tarvitsee rawrite-ohjelman:
        http://uranus.it.swin.edu.au/~jn/linux/rawwrite.htm

        Kun sen on kirjoittanut korpulle, niin sillä korpulla bootataan kone. Sitten pitää poistaa järjestelmänvalvojan salasana ja luoda uusi.
        Kannattaa harkita huolella mitä tekee, kun tuolla bootti-diskillä saa valitettavasti koneen käyttökelvottomaan kuntoon, jos tekee pahoja kämmejä.


      • - " -
        kehiin! kirjoitti:

        Piti oikein Googlella etsiä, että mitä sitä tulikaan käytettyä..
        Jos en kovin väärin muista, niin se oli:
        http://home.eunet.no/~pnordahl/ntpasswd/bootdisk.html
        ja sieltä bd050303.zip

        se pitää siis purkaa ensin ja sitten kirjoittaa korpulle.
        linuxissa dd if= of=/dev/fd0
        ja Windowsissa tarvitsee rawrite-ohjelman:
        http://uranus.it.swin.edu.au/~jn/linux/rawwrite.htm

        Kun sen on kirjoittanut korpulle, niin sillä korpulla bootataan kone. Sitten pitää poistaa järjestelmänvalvojan salasana ja luoda uusi.
        Kannattaa harkita huolella mitä tekee, kun tuolla bootti-diskillä saa valitettavasti koneen käyttökelvottomaan kuntoon, jos tekee pahoja kämmejä.

        Pitäisi poistaa järjestelmänvalvojan salasana ja käyttäjätunnuksen salasana eikä tarvitsis luoda edes uusia. En haluaisi tuolla bootti-diskillä saada konetta käyttökelvottomaan kuntoon, jos tulee pahoja kämmejä.

        Miten tämä alla oleva suoraan lainattu sivustolta http://home.eunet.no/~pnordahl/ntpasswd/bootdisk.html olisi yksinkertaisesti suomeksi siltä osin, että saisin vaan sen salasanan resetoiduksi. Ja käyttis toimisi ja voisin jatkaa taas "elämää" sen kanssa.

        "Offline NT Password & Registry Editor, Bootdisk / CD

        --------------------------------------------------------------------------------

        Note july 2005: I have problems catching up with my mail for the last 2-3 months, and will probably have more problems for a few months more. You may get late response, or no response at all if you mail me. Sorry!

        I've put together a single floppy or CD which contains things needed to edit the passwords on most systems.

        The bootdisk supports standard (dual)IDE controllers (built in), a lot of SATA-controllers, and most SCSI-controllers with the drivers supplied in a seperate archive below. PS/2 keyboard or USB-keyboard supported (mouse not required) It does not need any other special hardware, it will run on 486 or higher, with at least 32MB (I think) ram or more. Unsupported hardware: MCA, EISA, i2o may not work.

        Tested on: NT 3.51, NT 4 (all versions and SP), Windows 2000 (all versions), Windows XP (all versions, also SP2), Windows Server 2003 (at least Enterprise).

        DANGER WILL ROBINSON!
        If used on users that have EFS encrypted files, and the system is XP, all encrypted files for that user will be UNREADABLE! and cannot be recovered unless you remember the old password again If you don't know if you have encrypted files or not, you most likely don't have them. (except maybe on corporate systems)

        Please see the Frequently Asked Questions and the version history below before emailing questions to me. Thanks!

        Also take a look at Grenier's DOS port

        How to fix it if you lost your admin password for your ActiveDirectory. Thanks to John Simpson.

        Other ways to recover lost password etc at MCSE World

        --------------------------------------------------------------------------------

        How to use?
        Yes, long text. Please read it all and the FAQ before mailing me questions
        If you have the CD, all drivers are included. If you use the floppy, and you need the SCSI-drivers set, either prepare a floppy with the scsi-drivers .zip file unzipped (in \scsi), or put a selection of the drivers you need in the \scsi folder on the main floppy, there should be enough space for maybe a couple of drivers. In the latter case you don't need to carry around and swap floppies.

        Overview
        Disk select, tell which disk contains the Windows system. Optionally you will have to load drivers.
        PATH select, where on the disk is the system?
        File select, which parts of registry to load, based on what you want to do.
        Password reset or other registry edit.
        Write back to disk (you will be asked)
        DON'T PANIC!! - Most questions can usually be answered with the default answer which is given in [brackets]. Just press enter/return to accept the default answer.

        1. DISK SELECT
        Which disk contains your Windows system?

        =========================================================
        . Step ONE: Select disk where the Windows installation is
        =========================================================
        Disks:
        Disk /dev/ide/host0/bus0/target0/lun0/disc: 2147 MB, 2147483648 bytes
        NT partitions found:
        1 : /dev/ide/host0/bus0/target0/lun0/part1 2043MB Boot

        Please select partition by number or
        a = show all partitions, d = automatically load new disk drivers
        m = manually load new disk drivers
        l = relist NTFS/FAT partitions, q = quit
        Select: [1]

        For most machines only one disk and parition is listed, if so, just go with selection 1 (default)
        Otherwise select partition
        If no disks or not all disks are shown, you may need to load disk drivers, for SCSI-controllers (or some IDE-raid controllers). Select d to go to the driver select menu for auto-probe (based what's found on the PCI bus)
        If auto-probe won't work, you may have to load something manually, select m to do that (like the old system)
        2. HOW TO MANUALLY LOAD DRIVERS
        Try auto-probe (d) first, only do this if you have to manually try to load some or all drivers.
        Select: [1] m
        ==== DISK DRIVER / SCSI DRIVER select ====
        You may now insert or swap to the SCSI-drivers floppy
        Press enter when done:
        Found 1 floppy drives
        Found only one floppy, using it..
        Selected floppy #0
        Mounting it..
        Floppy selection done..
        SCSI-drivers found on floppy:

        1 BusLogic.o.gz
        2 aic7xxx.o.gz
        3 sym53c8xx.o.gz
        [ ... ]

        SCSI driver selection:
        a - autoprobe for the driver (try all)
        s - swap driver floppy
        q - do not load more drivers
        or enter the number of the desired driver

        SCSI driver select: [q]

        Select a for auto-probe, it will try to load all drivers, and stop when one loads properly. Some drivers may need more driver modules, so you may have to redo the auto-probe several times.
        Or if you know what you want, just enter it's number or name.
        SCSI driver select: [q] a
        [ BusLogic.o.gz ]
        Using /tmp/scsi/BusLogic.o
        PCI: Found IRQ 11 for device 00:10.0

        [.... lots of driver / card info ...]

        scsi0: *** BusLogic BT-958 Initialized Successfully ***
        scsi0 : BusLogic BT-958
        Vendor: FooInc Model: MegaDiskFoo Rev: 1.0
        Type: Direct-Access ANSI SCSI revision: 02

        [ ... ]

        Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
        SCSI device sda: 8388608 512-byte hdwr sectors (4295 MB)
        Partition check:
        /dev/scsi/host0/bus0/target0/lun0: p1
        Driver BusLogic.o.gz loaded and initialized.

        You may then quit the selection with q or try for more drivers.
        When you quit, you will get back to the disk select (see above) and hopefully see more disks.

        3. PATH AND FILE SELECT
        Where's the Windows system located?
        On the selected partition/disk, the main files for windows can theoretically be anywhere. And we must find the registry files to be able to edit them. There are however some usual places:

        winnt35/system32/config - Windows NT 3.51
        winnt/system32/config - Windows NT 4 and Windows 2000
        windows/system32/config - Windows XP/2003 and often Windows 2000 upgraded from Windows 98 or earlier.
        These usual paths will be checked, and if found, they will be suggested as the default.

        Selected 1
        Mounting on /dev/ide/host0/bus0/target0/lun0/part1
        NTFS volume version 3.1.
        Filesystem is: NTFS

        =========================================================
        . Step TWO: Select PATH and registry files
        =========================================================
        What is the path to the registry directory? (relative to windows disk)
        [windows/system32/config] :
        -r-------- 1 0 0 262144 Jan 12 18:01 SAM
        -r-------- 1 0 0 262144 Jan 12 18:01 SECURITY
        -r-------- 1 0 0 262144 Jan 12 18:01 default
        -r-------- 1 0 0 8912896 Jan 12 18:01 software
        -r-------- 1 0 0 2359296 Jan 12 18:01 system
        dr-x------ 1 0 0 4096 Sep 8 11:37 systemprofile
        -r-------- 1 0 0 262144 Sep 8 11:53 userdiff

        Select which part of registry to load, use predefined choices
        or list the files with space as delimiter
        1 - Password reset [sam system security]
        2 - RecoveryConsole parameters [software]
        q - quit - return to previous
        [1] :

        If the directory is correct, something like the above will be listed (it may vary a bit..)
        You may then choose some canned answers based on what you want to do.
        Password reset is the default, and most used.
        Option 2, RecoveryConsole is for setting 2 parameters that the Windows 2000 and newer RecoveryConsole (boot from CD, select Recovery and console mode) uses. One of the parameters allows RecoveryConsole to be run without it prompting for the admin password. If you do not know what RecoveryConsole is, don't bother. Or go search the net..
        Or if you want to do manual edit of registry, select your hives to load. Enter all names on one line with space between.
        We select 1 to edit passwords..

        4. PASSWORD RESET
        Everything is set and ready, let's roll!

        =========================================================
        . Step THREE: Password or registry edit
        =========================================================
        chntpw version 0.99.2 040105, (c) Petter N Hagen

        [.. some file info here ..]

        * SAM policy limits:
        Failed logins before lockout is: 0
        Minimum password length : 0
        Password history count : 0

        ======== chntpw Main Interactive Menu ========

        Loaded hives:

        1 - Edit user data and passwords
        2 - Syskey status & change
        3 - RecoveryConsole settings
        - - -
        9 - Registry editor, now with full write support!
        q - Quit (you will be asked if there is something to save)

        What to do? [1] -> 1

        ===== chntpw Edit User Info & Passwords ====

        RID: 01f4, Username:
        RID: 01f5, Username: , *disabled or locked*
        RID: 03e8, Username: , *disabled or locked*
        RID: 03eb, Username: , *disabled or locked*
        RID: 03ea, Username: , *disabled or locked*

        Select: ! - quit, . - list users, 0x - User with RID (hex)
        or simply enter the username to change: [Administrator]

        Here you can enter the username you want to reset the password for. NOTE: It is case-sensitive, write it exact as listed (without the < and > of course)

        Or if the name uses some characters that cannot be displayed, enter it's ID number (RID), like this: 0x1f4 would select administrator.

        We select the default, which is administrator.

        RID : 0500 [01f4]
        Username: Administrator
        fullname:
        comment : Built-in account for administering the computer/domain
        homedir :

        Account bits: 0x0210 =
        [ ] Disabled | [ ] Homedir req. | [ ] Passwd not req. |
        [ ] Temp. duplicate | [X] Normal account | [ ] NMS account |
        [ ] Domain trust ac | [ ] Wks trust act. | [ ] Srv trust act |
        [X] Pwd don't expir | [ ] Auto lockout | [ ] (unknown 0x08) |
        [ ] (unknown 0x10) | [ ] (unknown 0x20) | [ ] (unknown 0x40) |

        Failed login count: 0, while max tries is: 0
        Total login count: 3

        * = blank the password (This may work better than setting a new password!)
        Enter nothing to leave it unchanged
        Please enter new password: *

        Some information is displayed. Also, if the account is locked, you will be asked if you wish to unlock it (not shown here)

        We go for the blank password option (*) WHICH IS HIGLY RECOMMENDED over setting a new one.

        Please enter new password: *
        Blanking password!

        Do you really wish to change it? (y/n) [n] y
        Changed!

        Select: ! - quit, . - list users, 0x - User with RID (hex)
        or simply enter the username to change: [Administrator] !

        ! brings us back to the main menu here.

        ======== chntpw Main Interactive Menu ========

        Loaded hives:

        1 - Edit user data and passwords
        2 - Syskey status & change
        3 - RecoveryConsole settings
        - - -
        9 - Registry editor, now with full write support!
        q - Quit (you will be asked if there is something to save)

        What to do? [1] -> q

        5. WRITING OUT THE CHANGES
        Everything has been done, time to commit the changes.

        Hives that have changed:
        # Name
        0 - OK

        =========================================================
        . Step FOUR: Writing back changes
        =========================================================
        About to write file(s) back! Do it? [n] : y

        THIS IS YOUR LAST CHANCE! If you answer y here there will be a write to disk!

        Writing sam

        NOTE: A disk fixup will now be done.. it may take some time

        Mounting volume... OK

        Processing of $MFT and $MFTMirr completed successfully.

        NTFS volume version is 3.1.

        Setting required flags on partition... OK

        Going to empty the journal ($LogFile)... OK

        NTFS partition /dev/ide/host0/bus0/target0/lun0/part1 was processed successfully.
        NOTE: Windows will run a diskcheck (chkdsk) on next boot.
        NOTE: this is to ensure disk intergity after the changes

        ***** EDIT COMPLETE *****

        You can try again if it somehow failed, or you selected wrong
        New run? [n] : n

        That was all. The disk fixup is only run on NTFS filesystems, and will force chkdsk next time windows boots.

        Please answer n here and then reboot, CTRL-ALT-DEL. Remember to remove the floppy or CD.

        What can go wrong?
        Lots of things can go wrong, but most faults won't damage your system.
        The most critical moment is when writing back the registry files to NTFS. Sometimes it emits errors, even if the new data in fact has been written. The most common problem seen during 2004 is that it does not change the password, or even messes it up so it is impossible to log in with that user. This does not happen often, however. Unfortunately, I haven't found the exact cause yet.

        Also, see the FAQ for help with common problems.

        For linux-knowledged people, you may do things manually if the scripts fail, you have shells on tty1-tty4 (ALT F1 - ALT F4).

        --------------------------------------------------------------------------------

        Bootdisk history
        2005-03-03

        Driver update only, with a few fixes to the autoprobe, too.
        Some popular drivers like aacraid, megaraid and some SATA-drivers were problematic or missing, now hopefully here.
        Note that most SATA-drivers also need the libata.ko.gz file, autprobe loads it if needed.
        The driver archive are too big to include all drivers on a floppy so remove some you're sure you don't need. Remember to always keep pcitable.gz and moddep.gz if you want autoprobe to work.
        The CD of course includes all drivers.
        The manual try-all-drivers load is buggy, and won't try to load all drivers, it will stop after each that has not been tried before. But specifying a single driver directly still works.
        No changes to password edit routines
        2004-12-05

        NEW! BETTER! driver probe system! It now uses PCI info to find drivers to load. Select 'd' from the disk menu if needed, and it should do it's job automatically.
        This should make SATA and other drivers which require multiple driver modules load correctly! Sorry about the mess earlier.
        PCI-to-driver mapping database and some tools by Mandrakesoft. Thanks!
        NOTE: The disk drivers archive (sc041205.zip) has now grown too large to unzip to a single floppy, so just leave out things you don't need. Read more about this at the bottom of the page.
        All drivers are of course included on the CD as earlier.
        2004-08-18

        Fixed some critical bugs when doing registry edit (key/value add/del/expand), see main page for more details
        More drivers: Some SATA drivers, hope they work.
        More drivers: Hopefully more up to date scsi/raid-drivers.
        NOTE: You may have to load more than one driver to get your disks to work, just repeat autoprobe until it can't load more drivers.
        There MAY now be (some) support for Windows Dyamic Disks, but I have NOT tested it. Reports welcome, but I probably can not help each of you individually.
        Keyboard was reported not working on some laptops, hopefully OK now.
        USB keyboard works? I don't have anything to test with.
        No special changes to the basic password edit stuff.
        Some more commands in registry editor, better support for large registries. See main page.
        9. aug 2004: (version 040116 and earlier) Some rather serious bugs have been discovered in the allocation routines, which are used when adding or deleting values or keys in the registry editor. In best case, they leak space, in worst case, it may corrupt the file.
        NOTE: This does not generally affect password changing, since password reset just overwrites a few bytes in place, it does not reallocate space.
        SUMMARY: Password edit OK. Regedit may not be. Fixed in newer versions.

        040219:
        Sorry, but the 040116 version seems to have a problem with keyboard on some laptops (keyboard does not work). I do not have a fix for it yet.

        040114:

        Completely NEW system on the floppy/CD. New menues, and walkthrough. Also new docs, see above :)
        Support for setting the entry that makes RecoveryConsole skip prompt for admin password has been added.
        And since the new floppy stuff is just that, new, there may be glitches. Please tell me if there is anything serious! Thanks!
        For the linux techies, floppy now uses uClibc (reduced size libc) and BusyBox binaries properly, and also devfs which gives more logical and dynamic device paths (makes it easier to see what has been found). Some of the floppy design/build has been ripped from floppyfw by Thomasez.
        (earlier history removed)
        9705xx
        First public release.

        --------------------------------------------------------------------------------

        Download
        Note: Some links may be offsite.

        bd050303.zip (~1.1MB) - Bootdisk image, date 050303 (md5sum: 4c85bc15286e69f9fd347e07711636eb)
        sc050303.zip (~1.4MB) - SCSI-drivers (050303) (only use newest drivers with newest bootdisk, this one works with bd050303) (md5sum: 745a1889b6580bc8f1bfb565e73666d3)
        cd050303.zip (~3MB) - Bootable CD image with same version and drivers as floppies above. (md5sum: 0990b34b2c158666de26efc0db6edf18)
        Previous version is 041205 or 041217 and may sometimes be found here (also my site)

        Mirror(s), in case you have problems getting the files from here.
        I cannot guarantee that they are updated or that they havent changed anything!

        ListSoft's mirror
        NOTE THAT THE BOOTDISK CONTAINS CRYPTHOGRAPHIC CODE, and that it may be ILLEGAL to RE-EXPORT it from your country.

        How to make the floppy
        The unzipped image (bdxxxxxx.bin) is a block-to-block representation of the actual floppy, and the file cannot simply be copied to the floppy. Special tools must be used to write it block by block.

        Unzip the bd zip file to a folder of your choice.
        There should be 3 files: bdxxxxxx.bin (the floppy image) and rawrite2.exe (the image writing program), and install.bat which uses rawrite2 to write the .bin file to floppy.
        Insert a floppy in drive A: NOTE: It will lose all previous data!
        Run (doubleclick) install.bat and follow the on-screen instructions.
        Thanks to Christopher Geoghegan for the install.bat file (some of it ripped from memtest86 however)
        Or from unix:

        dd if=bd??????.bin of=/dev/fd0 bs=18k

        How to make and use the drivers floppy
        NOTE: Not all files will fit on a floppy, so leave out what you think you do not need!

        Format (or delete all contents) on a floppy
        Unzip the drivers you think you may need to it
        Files with names ending in .ko.gz should end up in a directory called scsi
        Be sure to also include the files moddep.gz and pcitable.gz, they are the dependency list, and pci mappings.
        To use, at the disk select menu, select 'd' to auto-load, and you will be asked to swap to the drivers floppy when needed.

        How to make the CD
        Unzipped, there should be an ISO image file (cd??????.iso). This can be burned to CD using whatever burner program you like, most support writing ISO-images. Often double-clikcing on it in explorer will pop up the program offering to write the image to CD. Once written the CD should only contain some files like "initrd.gz", "vmlinuz" and some others. If it contains the image file "cd??????.iso" you didn't burn the image but instead added the file to a CD. I cannot help with this, please consult you CD-software manual or friends.

        The CD will boot with most BIOSes, see your manual on how to set it to boot from CD. Some will auto-boot when a CD is in the drive, some others will show a boot-menu when you press ESC or F10/F12 when it probes the disks, some may need to have the boot order adjusted in setup.

        --------------------------------------------------------------------------------

        Bootdisk credits and license
        Most of the stuff on the bootdisk is either GPL, BSD or similar license, you can basically do whatever you want with all of it, the sourcecode and licenses can be found at their sites, I did not change/patch anything.

        However, the chntpw binary is (c) 2004 Petter N Hagen, and is restricted somewhat, see COPYING.txt Thus distribution of the floppy image is restricted by this if it contains that binary.

        Stuff I used, big thanks:

        Linux kernel
        NTFS for linux project
        BusyBox - Lots of commands in one binary :)
        uClibc - A reduced size / embedded libc.
        Some bootdisk ideas and layout from floppyfw thanks to ThomasEZ for that (and his great firewall..)

        --------------------------------------------------------------------------------

        --------------------------------------------------------------------------------

        050303, pnordahl@eunet.no

        Mitä ihan konkreettisesti pitäisi tehdä, jotta tulisi tehdyksi oikein ilman kämmejä tässä asiassa?


      • -&quot;-
        kehiin! kirjoitti:

        Piti oikein Googlella etsiä, että mitä sitä tulikaan käytettyä..
        Jos en kovin väärin muista, niin se oli:
        http://home.eunet.no/~pnordahl/ntpasswd/bootdisk.html
        ja sieltä bd050303.zip

        se pitää siis purkaa ensin ja sitten kirjoittaa korpulle.
        linuxissa dd if= of=/dev/fd0
        ja Windowsissa tarvitsee rawrite-ohjelman:
        http://uranus.it.swin.edu.au/~jn/linux/rawwrite.htm

        Kun sen on kirjoittanut korpulle, niin sillä korpulla bootataan kone. Sitten pitää poistaa järjestelmänvalvojan salasana ja luoda uusi.
        Kannattaa harkita huolella mitä tekee, kun tuolla bootti-diskillä saa valitettavasti koneen käyttökelvottomaan kuntoon, jos tekee pahoja kämmejä.

        Hei! Olisiko mahdollista tavata? Jos asut Kehä III sisäpuolella, niin jos voisit auttaa resetoimaan sen salasanan BOOTilla? Siitä kiitos etukäteen! Kiitos!


    • ---

      mistä johtuu kun yritän asentaa win 2000 uudelleen niin kone ei suostu käynnistämään cd:tä vaikka F10 asetuksista olen pistänyt cd:n ekaks ja semmosta... pitäiskö mun tehdä asennus cd ja miten sen semmosen pystyy tekeen jos tarvii?

    Ketjusta on poistettu 0 sääntöjenvastaista viestiä.

    Luetuimmat keskustelut

    1. Marin syyttää nyt viranomaisia siitä että itärajaa ei saada suljettua

      https://www.hs.fi/politiikka/art-2000009088673.html Aina löytyy syyllinen muualta Marinin mielestä.
      Maailman menoa
      475
      8783
    2. Erika Vikman avoimena bilettämisestä kameroiden sammuttua: "Itse en olisi selvinnyt..."

      Erika Vikman paljastaa, bilettikö vaiko ei yön pikkutunneilla Vain elämää -ohjelman kuvauksissa muiden artistien kanssa. Kuvaukset loppuvat n. klo 24
      Kotimaiset julkkisjuorut
      40
      7284
    3. Mitä jos Putin ja Venäjä onkin oikeassa?

      Mitä jos Ukrainan länsimielit sittenkin kaltoin kohtelivat itäukrainan venäjänkielistä ja mielistä väestöä kuten esim, Oliver Stonen dokumentti Ukr
      Maailman menoa
      724
      3079
    4. 36-vuotiaalle Marinille laitettu "holhooja" joka vahtii hänen tekemisiään

      eli sitä, että nyt ei mennä bilettään ja sekoileen, jotta ei kohuja tulisi kun vaalitkin lähenee. Onhan se jotenkin hupaisaa, että 36-vuotias perheen
      Maailman menoa
      370
      2999
    5. En tahdo kuolla Putinin takia, video voi järkyttää herkkiä katsojia

      Video voi järkyttää herkkiä katsojia En tahdo kuolla Putinin takia https://youtu.be/v4hQi-gs3AY
      Maailman menoa
      214
      1537
    6. Mikko Koivun petturuudelle kova hinta

      Kaunis Helena saa miljoonia dollareita ja Mikko pojalle nauravat kaikki.. Tämä on ilon päivä 😁
      Kotimaiset julkkisjuorut
      90
      1351
    7. Sofian maineella on vaikea löytää uutta lompakkoa

      Mutta pakko hänen on yrittää koska työnteko ei maistu. Tänään taas baarikierros josko saisi jonkun satimeen.
      Kotimaiset julkkisjuorut
      98
      1183
    8. Auttaako mustasukkaiseksi tekeminen?

      Mitä sillä saavuttaa tai yrittää saavuttaa?
      Ikävä
      129
      1036
    9. Voiko kirjoituksen perusteella rakastua?

      Haluaisin tietää mitä mietitte, voiko toiseen rakastua pelkän kirjoitustavan perusteella? Tietämättä toisen ulkonäköä?
      Ikävä
      85
      902
    Aihe